Panasonic KX-TDA5920 Manuale

SD Memory Card Installation/Upgrade Guide 1

KX-TDA5920/KX-TDA0920

KX-TDA6920

SD Memory Card Installation/Upgrade Guide

Table of Contents

Preparation............................................................................................................................... 2

Installing the SD Memory Card in a New Hybrid IP-PBX ........................................................ 5

Upgrading a Hybrid IP-PBX from a Previous Version of System Software (KX-TDA50/KX-

TDA100/KX-TDA200 only) ....................................................................................................... 8

Restoring a Hybrid IP-PBX to a Previous System Version (KX-TDA50/KX-TDA100/KX-TDA200

only)........................................................................................................................................ 15

KX-TDA5920: PSMPR Software File Version 3.0000 or later

KX-TDA0920: PMPR Software File Version 3.0000 or later

KX-TDA6920: PLMPR Software File Version 3.0000 or later

Document Version: 2006-02

2 SD Memory Card Installation/Upgrade Guide

Section 1

Preparation

Please read the information in this section before installing or

upgrading the SD Memory Card.

1.1 Introduction

This leaflet provides procedures for installing the SD Memory Card for Software Upgrade in a new

Hybrid IP-PBX, and also for upgrading system software from a previous version.

The types of SD Memory Card are as follows:

These procedures involve transferring files between the Hybrid IP-PBX, the SD Memory Card, and a

PC running KX-TDA50 Maintenance Console (for the KX-TDA50), KX-TDA Maintenance Console (for

the KX-TDA100/KX-TDA200) or KX-TDA600 Maintenance Console (for the KX-TDA600).

At any point during a procedure, you can use the SD Card File View and Load option from

Maintenance Console's Utility menu to view the header information of files on the SD Memory Card.

This allows you to confirm that the correct versions of relevant files have been copied to the SD

Memory Card.

The procedures described in this leaflet use the following files, contained on the SD Memory Card:

SD Memory Card Supported PBX

KX-TDA5920 KX-TDA50

KX-TDA0920 KX-TDA100/KX-TDA200

KX-TDA6920 KX-TDA600

File Description

DSSYS (KX-TDA5920)

DSYS (KX-TDA0920)

DLSYS (KX-TDA6920)

User-set PBX system data

PSMPR (KX-TDA5920)

PMPR (KX-TDA0920)

PLMPR (KX-TDA6920)

Hybrid IP-PBX main software

DLNGx (x=0–2) Extension LCD language data

DSIxxx (KX-TDA5920)

DIxxx (KX-TDA0920)

DLIxxx (KX-TDA6920)

Default value data files

1.1 Introduction

SD Memory Card Installation/Upgrade Guide 3

IMPORTANT

• In order to avoid possible corruption of data on the SD Memory Card, please ensure

that the "SD ACCESS" LED is off before pressing the Reset Button.

• The SD Memory Card poses a choking hazard. Keep the SD Memory Card out of reach

of children.

• The SD Memory Card must be inserted in the SD Memory Card slot of the Hybrid IP-

PBX before start up.

• Before touching the System Initialize Switch, discharge static electricity by touching

ground or wearing an earthing strap.

1.1.1 KX-TDA5920/KX-TDA0920/KX-TDA6920 Features

The KX-TDA5920/KX-TDA0920 allow access to the following enhanced features. For details on these

features, see the Feature Manual.

• Enhanced CTI functions

• Network Direct Station Selection (NDSS)

• Automatic Call Distribution (ACD)

• Cellular Phone Features

– Call Transfer from Outside Destination

– DISA Automatic Walking COS

– Outside Destinations in Incoming Call Distribution Group

• Centralized Voice Mail

• Common extension numbering plan for two PBXs in a network

• Network ICD Group

• PS Roaming by ICD Group

DSKEYSD (KX-TDA5920)

DKEYSD (KX-TDA0920)

DLKEYSD (KX-TDA6920)

Enhanced feature access file

File Description

1.2 Before Installing SD Memory Card for Software Upgrade

4 SD Memory Card Installation/Upgrade Guide

1.2 Before Installing SD Memory Card for Software

Upgrade

Back up the DSKEYSD/DKEYSD/DLKEYSD file

The DSKEYSD/DKEYSD/DLKEYSD file stored on the SD Memory Card contains data necessary to

use the new features. If this file is damaged, or accidentally deleted, these new features will not

function. Using an SD Memory Card Reader, back up all of the files and folders on the SD Memory

Card, including this file, to a PC. The contents of this file are different for every SD Memory Card, so

you must back up each SD Memory Card separately.

SD Memory

Card Reader

SD Memory Card Installation/Upgrade Guide 5

Section 2

Installing the SD Memory Card in a New Hybrid

IP-PBX

Before using the SD Memory Card for Software Upgrade, it is

necessary to prepare the correct system data files using a

connected PC.

2.1 Procedure

Before beginning the install procedure, make sure that power is not supplied to the Hybrid IP-PBX,

and the latest version of Maintenance Console is installed to the PC.

1. Install the SD Memory Card in the SD Memory Card slot of the PBX.

KX-TDA50

KX-TDA100/KX-TDA200

KX-TDA600

CARD

2.1 Procedure

6 SD Memory Card Installation/Upgrade Guide

2. Slide the System Initialize Switch to the "SYSTEM INITIALIZE" position.

KX-TDA50

KX-TDA100/KX-TDA200

KX-TDA600

3. Turn on the power to the PBX.

4. While the RUN indicator is flashing, slide the System Initialize Switch back to the "NORMAL"

position.

Initialization may take about 1 min to 3 min. When initialization is complete, the RUN indicator

will stop flashing and turn on.

5. Connect to the PBX using Maintenance Console.

Quick Setup will start automatically.

6. Set the data items as prompted.

Quick Setup will finish.

Reset Button

System Initialize Switch

Reset Button

SYSTEM

INITIALIZE

RESET

NORMAL

System Initialize Switch

Reset Button

SYSTEM

INITIALIZE

RESET

NORMAL

2.1 Procedure

SD Memory Card Installation/Upgrade Guide 7

Backing Up DSKEYSD/DKEYSD/DLKEYSD file

If the contents of the SD Memory Card have not been previously backed up to the PC using an SD

Memory Card Reader, it is strongly recommended to back up the DSKEYSD/DKEYSD/DLKEYSD file

after Quick Setup is complete. Follow the procedure below:

1. From Maintenance Console’s Utility menu, select File Transfer PBX (SD Card) to PC.

Note

The screenshot shown here is for reference only, and may differ from the display on your PC.

2. Select DSKEYSD (KX-TDA50), DKEYSD (KX-TDA100/KX-TDA200) or DLKEYSD (KX-

TDA600) from the list of files.

3. Click Transfer.

The Save dialog box will be displayed.

4. Navigate to the folder in which you want to save the file.

5. Enter a file name.

6. Click Save.

A window showing the download process will be displayed.

A message will be displayed when the transfer is complete.

7. Click OK.

The Hybrid IP-PBX can now be programmed for the customer.

8 SD Memory Card Installation/Upgrade Guide

Section 3

Upgrading a Hybrid IP-PBX from a Previous

Version of System Software (KX-TDA50/KX-

TDA100/KX-TDA200 only)

To upgrade the system software of the Hybrid IP-PBX from a

previous version while keeping the current user data, it is

necessary to follow the procedure below.

3.1 Procedure

Before beginning the upgrade procedure, make sure that both the latest and previous versions of

Maintenance Console are installed to the PC.

Notes

• Certain user data is cleared during the upgrade process, including Outgoing Messages

(OGMs). Before upgrading the PBX, be sure to back up OGMs to a PC using Maintenance

Console.

For a list of all items cleared during upgrade, see "3.2 Data Reset After Upgrade".

• The screenshots shown here are for reference only, and may differ from the displays on your

PC.

1. Back up the current user data.

1a. Back up the current DSSYS/DSYS system data file from the PBX to the SD Memory Card.

1. Connect to the PBX using Maintenance Console.

The appropriate version of Maintenance Console will be selected automatically.

2. From the Tool menu, select SD memory backup.

The current DSSYS/DSYS system data file will be copied from the PBX to the SD Memory

Card.

3.1 Procedure

SD Memory Card Installation/Upgrade Guide 9

1b. Copy the current DSSYS/DSYS from the SD Memory Card to the PC.

1. From the Utility menu, select File Transfer PBX (SD Card) to PC.

2. Select DSSYS (KX-TDA50) or DSYS (KX-TDA100/KX-TDA200) from the list of files.

3. Click Transfer.

The Save dialog box will be displayed.

4. Navigate to the folder in which you want to save the file.

5. Enter a file name.

6. Click Save.

A window showing the download process will be displayed.

A message will be displayed when the transfer is complete.

7. Click OK.

8. From the File menu, select eXit.

9. Click OK.

The Maintenance Console software will close. This step is necessary to switch to the

current version of Maintenance Console.

2. Upgrade the current user data.

2a. Convert the current DSSYS/DSYS file for use with the new version.

1. Start Maintenance Console. (Do not connect to the PBX.)

The appropriate version of Maintenance Console will be selected automatically.

2. From the File menu, select Open.

The Open dialog box will be displayed.

3. Navigate to the folder in which you saved the DSSYS/DSYS file in Step 1.

4. Select the file.

5. Click Open.

A dialog box will appear to confirm that you want to convert the data.

6. Click Yes.

3.1 Procedure

10 SD Memory Card Installation/Upgrade Guide

7. Enter a name for the new converted system file.

The DSSYS/DSYS file will be converted for compatibility with the new version of

Maintenance Console, saved, and opened.

8. From the File menu, select Close, to close the currently open system file.

3. Set up the new system version.

3a. Install the new SD Memory Card.

1. Turn off the power to the PBX.

2. Remove the current SD Memory Card from the SD Memory Card slot.

3. Install the new SD Memory Card.

KX-TDA50

KX-TDA100/KX-TDA200

CARD

Altri manuali per KX-TDA5920

Questo manuale è adatto per i seguenti modelli

Altri manuali Panasonic Magazzinaggio

Panasonic

Panasonic RP-SDP32GE1K Manuale utente

Panasonic

Panasonic CFVHD7220 - SECOND HARD DRIVE DISC/LPTP Manuale utente

Panasonic

Panasonic AG-MSU10 Manuale utente

Panasonic

Panasonic AJ-PCS060G - DVCPRO - Data Storage Wallet Manuale utente

Panasonic

Panasonic AJ-PCD20E Manuale utente

Panasonic

Panasonic RP-SDUC64GAK Manuale utente

Panasonic

Panasonic WJHDE300 - DIGITAL DISK RECORDER Manuale utente

Panasonic

Panasonic RP-SDP24GE1K Manuale utente

Panasonic

Panasonic P2 AJ-PCD30P Manuale utente

Panasonic

Panasonic RP-SDW32GG1K Manuale utente

Panasonic

Panasonic RP-SDW64GE1K Manuale utente

Panasonic

Panasonic VW-PT2 Manuale utente

Panasonic

Panasonic RP-SDUC32GAK Manuale utente

Panasonic

Panasonic RP-SDN16GU1A Manuale utente

Panasonic

Panasonic RP-SDUB64GAK Manuale utente

Panasonic

Panasonic RP-SDW48GE1K Manuale utente

Panasonic

Panasonic RP-SDZA64GAK Manuale utente

Panasonic

Panasonic RP-SDRC64GAK Manuale utente

Panasonic

Panasonic RP-SDQA32GUK Manuale utente

Panasonic

Panasonic RP-SDUA64GUK Manuale utente

Panasonic

Panasonic KX-NCPS01 Manuale utente

Panasonic

Panasonic JU-455-5 Manuale utente

Panasonic

Panasonic RP-SDL16GU1K Manuale utente

Panasonic

Panasonic RP-SDRC32GAK Manuale utente

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente

Dell

Dell PowerVault MD3600f Series Manuale utente

CFI

CFI TERA STOR SATA RAID IV Manuale utente