Panduit BT2HT Manuale utente

E-mail:

[email protected]

Technical upport:

1-800-777-3300

FIGURE 1

Page: 1 of 4

INTRODUCTION

The BT2HT Tool installs Panduit Pan-Steel coated and

uncoated S Series strap and buckles in widths of 3/8” X

.015” thick (9.5mm), 1/2” X .015” thick (12.7mm); and 5/8” X

.015” and .025” thick (15.9mm).

Note: This tool is not intended for other uses such as cutting

or tensioning other types of fastening devices.

TOOL FEATURE

A. Rear Handle

B.* Tension Pawl Release - Knob pointing towards the front

of tool for pawl engagement and to rear of tool for disen-

gagement.

C.* Anti-Backup Pawl Release - Lever up against tool for

pawl engagement and pulled down to disengage pawl.

D.* Detent Lock Pins - For controlled tension, pull both pins

forward; for manual tension, push both pins backward.

E. Cutter Handle - Cuts tie when strap is tensioned properly.

F. Cutter Blade

G. Tensioning andrel

H.* Tension Indicator Window - Located on the back of front

handle.

I.* Adjustment Knob - Adjust tension of strap application.

J. Tension Locking Set Screw

K. Front Handle - With ratchet controlled tensioning.

* ee Page 2 for Feature Detail

FIGURE 2

TOOL OPERATION

ee teps 1 - 8 on Pages 3 and 4.

PA25758A01

Rev: 03 5-2017

M TRAPPING TOOL OPERATION IN TRUCTION

BT2HT

www.panduit.com

Page: 2 of 4

PU H BACKWARD

FOR ANUAL

TENSION

PULL FORWARD

FOR CONTROLLED

TENSION

TROUBLE HOOTING

TO RELEASE AND RE OVE STRAP

FRO TOOL BEFORE CUTTING,

DISENGAGE BOTH KNOB AND LEVER.

ULTI-POSITION HANDLE

ALLOWS ACCESS TO TIGHT AREAS.

TOOL MAINTENANCE

TO INHIBIT CORROSION AND AINTAIN PERFOR ANCE OF THE TOOL, KEEP THE ETAL SURFACES COATED

WITH A LIGHT OIL (WD-40®OR EQUIVALENT).

BT2HT

Page: 3 of 4

TEP 1 TEP 2

Slide in buckle and bend the end of strap. Loop strap around bundle.

Thread strap into nose of tool

and through slot of tensioning mandrel.

TEP 3 TEP 4

Pull front handle to tension strap and rotate the tool

to touch the buckle (as shown).

Under controlled tension, the front handle will

break free when pre-determined tension is attained.

Push cutter lever downward to cut strap.

Remove cut-off portion of strap from tool.

BT2HT

Page: 4 of 4

TEP 5 TEP 6

Bend cut-off end of strap down. Position tab of the tool inside the buckle slot.

TEP 7 TEP 8

Bend the buckle lock down as shown. Strap correctly installed.

BT2HT

Altri manuali Panduit Utensili elettrici

Panduit

Panduit CT-2940 Series Manuale utente

Panduit

Panduit BlackFin CT-2980 Manuale utente

Panduit

Panduit RT2HT Manuale utente

Panduit

Panduit GTH Manuale utente

Panduit

Panduit CT-1090 Manuale di istruzioni

Panduit

Panduit GTH Manuale utente

Panduit

Panduit CP-881/E Manuale utente

Panduit

Panduit CT-1525 Manuale utente

Panduit

Panduit CA-800EZ Manuale utente

Panduit

Panduit CT-720 Manuale utente

Panduit

Panduit GS2B Manuale utente

Panduit

Panduit CT-260 Manuale utente

Panduit

Panduit CP-881 Manuale utente

Panduit

Panduit GS4EH Manuale utente

Panduit

Panduit ST-100 Manuale utente

Panduit

Panduit PBTMT Manuale utente

Panduit

Panduit CT-400 Manuale utente

Panduit

Panduit CT-2980/L Manuale utente

Panduit

Panduit PA24849A01 Manuale utente

Panduit

Panduit CP-991 Manuale utente

Panduit

Panduit CT-1700 Manuale utente

Panduit

Panduit PDM Manuale utente

Panduit

Panduit ST2MT Manuale utente

Panduit

Panduit BlackFin CT-2920 CCP Series Manuale utente

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Fein

Fein BSS 2.0 E Guida all'installazione

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Fein

Fein BLs 1.6 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale