Paradox K641+ Manuale utente

Printed in Canada | 10/2014 K641+ Install Guide

Compatibility

The K641+ is compatible with EVO192 and EVOHD. Please refer to the Technical

Specifications section for more details.

Technical Specifications

Warranty

Warranty: For complete warranty information on this product, please refer to the Limited Warranty Statement

found on the Web site www.paradox.com/terms. Your use of the Paradox product signifies your acceptance of all

warranty terms and conditions.

www.paradox.com

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

K641+ Keypad

Quick Install Guide

The K641+ keypad allows you to configure your Paradox system through its

interface.

Installation

1. Using a flathead screwdriver, pry the front housing assembly from the

backplate.

Figure 1: Opening the K641+

Operating Voltage 9 to 16Vdc

Operating Temp. -10 to 55°C (14 to 131°F)

Power Consumption Maximum current - 150mA

Dimensions 15 x 12.6 x 2.7 cm (6 x 4.9 x 1.06 in.)

Weight 230g (8.1 oz)

Humidity 5-93%

Compatibility EVO192 v2.16 or higher and EVOHD V1.0 or higher

Compliance EN50131-3 Grade 3; Environmental Class II

K641+-EI01

2. If using surface mounted cabling, you will need to knock out the plastic tab #1

at the top or bottom of the K641+ backplate in order to for the cable to pass

through, refer to figure 3.

3. Insert needle nose pliers into the appropriate plastic tab and carefully break off.

Figure 2: Surface-mount cabling plastic tab removal

4. Mount the backplate to the wall by securing a M3.5 (#6) screw in each of the

dedicated mounting holes and tamper hole while ensuring that the top is up, as

shown in figure 3. For EN installations, use the designated mounting holes (#2).

Figure 3: K641+ Backplate

5. Connect the 4-wire combus wires to the connector bus, as shown.

Figure 4: Wiring

6. Assemble both items by joining the hooks on the backplate to their respected

slots on the front housing assembly.

7. Secure the front housing to the backplate by snapping it into place.

The installation process is now complete.

Configuration

Modules can be configured using this keypad or BabyWare. The preferred option is

to use BabyWare to configure the system.

To configure modules through the keypad

1. Press and hold the 0 (number zero) key.

NOTE: The area must be disarmed to configure modules.

2. Initially you will see User Access Code but within 2 seconds it will change to

Installer Code.

3. When the Installer code appears, input the Installer code number, the default

number is [000000].

4. Input the 4 digit section code for Module Programming [4003].

NOTE: You need module serial numbers for programming.

5. Input the module serial number.

6. Input module section [001].

7. Now you can start module programming.

Cable pass-through

2 2

Wall Tamper

Plastic tab

EN mounting holes

Mounting holes

Note:

ZX1 is a Programmable input

PGM is a Programmable output

All Disarmed

2014/19/05 16:00

User Access Code

[* _ ]

Installers Code

[ _ ]

Indice

Altri manuali Paradox Tastiera

Paradox

Paradox Esprit+ 642 Manuale utente

Paradox

Paradox Digiplex Manuale utente

Paradox

Paradox 1686V Manuale utente

Paradox

Paradox Esprit 639 Manuale utente

Paradox

Paradox Esprit 640 Manuale utente

Paradox

Paradox Digiplex DGP2-641 Manuale utente

Paradox

Paradox Digiplex DGP2-648 Manuale utente

Paradox

Paradox 1686V Manuale utente

Paradox

Paradox K656 Touch Sense Manuale utente

Paradox

Paradox Esprit 636 Manuale utente

Paradox

Paradox Digiplex DGP2-648 Manuale utente

Paradox

Paradox K32LCD+ Manuale utente

Paradox

Paradox Spectra 1689 Manuale utente

Paradox

Paradox DGP2-641 Guida utente

Paradox

Paradox REM3 Manuale utente

Paradox

Paradox Esprit+ 642 Istruzioni per il montaggio

Paradox

Paradox SP5500 Manuale utente

Paradox

Paradox DigiplexNE DGP2-641 Manuale utente

Paradox

Paradox Spectra 1689 Manuale utente

Paradox

Paradox Grafica DNE-K07 Istruzioni operative

Paradox

Paradox Paradox Digiplex DGP-610 Manuale utente

Paradox

Paradox Digiplex DGP-620 Istruzioni operative

Paradox

Paradox Spectra 1641 Istruzioni per il montaggio

Paradox

Paradox Esprit Manuale utente

Manuali Tastiera popolari di altre marche

BFT

BFT SELETTO Manuale utente

Micro Id

Micro Id MP7G3BL Manuale di istruzioni

WindowMaster

WindowMaster WLI 130 Manuale utente

ACT

ACT ACT PRO 1030 Manuale utente

Cardin

Cardin SSB Series Manuale utente

Harman Kardon

Harman Kardon KP 1 Manuale utente

Chamberlain

Chamberlain KPR2000 Guida utente

CYP

CYP CR-KP1 Manuale utente

Aeware

Aeware k-35 Series Guida di riferimento

Aritech

Aritech CS-175 Series Manuale utente

GE NetworX NX-1600E Series Manuale utente

Lenze AC Tech

Lenze AC Tech MC SERIES Manuale utente

Burg Wächter

Burg Wächter secuENTRY 7711 Manuale utente

Aeware

Aeware in.k450 Manuale utente

Lenze

Lenze EPM-H410 Manuale utente

Toshiba

Toshiba RKP007Z Manuale utente

Gemini

Gemini GEM-DXK1 KEYPAD Manuale utente

Russound

Russound MDK-C5 Manuale operativo