Paradox K32LCD+ Manuale utente

Printed in Canada | 02/2019 PARADOX.COM

Technical Specifications

Warranty

Warranty: For complete warranty information on this product, please refer to the Limited Warranty

Statement found on paradox.com. Your use of the Paradox product signifies your acceptance of all

warranty terms and conditions.

© 2019 Paradox Ltd. All rights reserved. Specifications may change without prior notice.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

K32LCD+ Keypad

Quick Install Guide

The K32LCD+ keypad allows you to configure your Paradox system through its

interface.

Installation

1. Using a flathead screwdriver, pry the front housing assembly from the

backplate.

Figure 1: Opening the K32LCD+

Operating Voltage 9 to 16Vdc

Operating Temp. -10 to 55°C (14 to 131°F)

Power Consumption Maximum current - 150mA

Dimensions 15 x 12.6 x 2.7 cm (6 x 4.9 x 1.06 in.)

Weight 230g (8.1 oz)

Humidity 5-93%

Compatibility Compatible with MG5000, MG5050, and Spectra SP series

V2.31 or higher and SP4000, SP65 V4.90 or higher.

Compliance EN50131-3 Grade 2; Environmental Class II

K32LCD+-EI01

2. If using surface mounted cabling, you will need to knock out the plastic tab (#1)

at the top or bottom of the K32LCD+ backplate in order to for the cable to pass

through, refer to Figure 3.

3. Insert needle nose pliers into the appropriate plastic tab and carefully break off.

Figure 2: Surface-mount cabling plastic tab removal

4. Mount the backplate to the wall by securing a M3.5 #6 screw in each of the

dedicated mounting holes and tamper hole while ensuring that the top is up, as

shown in Figure 3. For EN installations, use the designated mounting holes (#3).

Figure 3: K32LCD+ Backplate

5. Connect the 4-wire combus wires to the connector bus, as shown.

Figure 4: Wiring

6. Assemble both items by joining the hooks on the backplate to their respected

slots on the front housing assembly.

7. Secure the front housing to the backplate by snapping it into place.

The installation process is now complete.

Compatibility

The K32LCD+ is compatible with Magellan and Spectra Series control panels only.

Please refer to the Technical Specifications section for more details.

1

2 2

3

1

2

33

3

Cable pass-through

2

EN Wall Tamper

Plastic tab

EN mounting holes

Mounting holes

3

Altri manuali per K32LCD+

3

Altri manuali Paradox Sistema di sicurezza

Paradox

Paradox Esprit 727 Manuale utente

Paradox

Paradox Magellan K636 Manuale utente

Paradox

Paradox MG5000 Manuale utente

Paradox

Paradox IP150 Manuale utente

Paradox

Paradox Digiplex NE DGP-NE96 Istruzioni operative

Paradox

Paradox StayD Series Manuale utente

Paradox

Paradox DGP2-641 Manuale utente

Paradox

Paradox Magellan MG5050E Manuale utente

Paradox

Paradox MAGELLAN MG6250 Manuale utente

Paradox

Paradox SR150 Manuale utente

Paradox

Paradox 1686H Manuale utente

Paradox

Paradox ParaVox Manuale utente

Paradox

Paradox IP100 Manuale utente

Paradox

Paradox K07C Manuale utente

Paradox

Paradox Magellan MG-6060 Manuale utente

Paradox

Paradox MG5050 Istruzioni operative

Paradox

Paradox Esprit 738 EXPRESS Manuale utente

Paradox

Paradox SP5500+ Istruzioni operative

Paradox

Paradox 1686V Manuale utente

Paradox

Paradox IP100 Manuale utente

Paradox

Paradox ESPRIT 728 ULT Istruzioni operative

Paradox

Paradox Magellan MG-6060 Manuale utente

Paradox

Paradox Digiplex EVO Manuale utente

Paradox

Paradox Magellan DCT2 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente