Paramont PAR 4MP Series Manuale utente
Paramont Cameras
User Manual: PAR 4MP Series
Notes on Safety
This product is intended to be supplied by a Listed Power Unit, marked with 'Limited
Power Source', 'LPS' on unit, output rated minimum 12V/2 Aor POE 48V/
350mA(depending on models), no more than 2000m altitude of operation and Tma=60
Deg.C.
As for the modes with PoE function, the function of the ITE being investigated to IEC
60950-1 standard is considered not likely to require connection to an Ethernet network
with outside plant routing, including campus environment and the ITE is to be
connected only to PoE networks without routing to the outside plant.
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
Do not attempt to disassemble the camera; in order to prevent electric shock, do not
remove screws or covers.
There are no user-serviceable parts inside. Please contact the nearest service center as
soon as possible if there is any failure.
Avoid from incorrect operation, shock vibration, heavy pressing which can cause
damage to product.
Do not use corrosive detergent to clean main body of the camera. If necessary, please
use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any
cleanser for high grade furniture is applicable.
Avoid aiming the camera directly towards extremely bright objects, such as, sun, as this
may damage the image sensor.
Please follow the instructions to install the camera. Do not reverse the camera, or the
reversing image will be received.
Do not operate it in case temperature, humidity and power supply are beyond the limited
stipulations.
Keep away from heat sources such as radiators, heat registers, stove, etc.
Do not expose the product to the direct airflow from an air conditioner.
This manual is for using and managing the product. We may reserve the rights of
amending the typographical errors, inconsistencies with the latest version, software
upgrades and product improvements, interpretation and modification. These changes
will be published in the latest version without special notification.
All pictures, charts, images in this manual are only for description and explanation of
our products. The ownerships of trademarks, logos and other intellectual properties
related to Microsoft, Apple and Google belong to the above-mentioned companies.
This manual is suitable for IR water-proof network cameras.
Table of Contents
1Introduction ...................................................................................................................1
2IE Remote Access...........................................................................................................2
2.1 LAN................................................................................................................................................ 2
2.1.1 Access through IP-Tool .................................................................................................. 2
2.1.2 Directly Access through IE............................................................................................. 3
2.2 WAN............................................................................................................................................... 5
3Live View........................................................................................................................8
4Network Camera Configuration.................................................................................11
4.1 System Configuration.................................................................................................................... 11
4.1.1 Basic Information......................................................................................................... 11
4.1.2 Date and Time .............................................................................................................. 11
4.1.3 Local Config................................................................................................................. 12
4.1.4 Storage.......................................................................................................................... 12
4.2 Image Configuration ..................................................................................................................... 14
4.2.1 Display Configuration .................................................................................................. 15
4.2.2 Video / Audio Configuration........................................................................................ 17
4.2.3 OSD Configuration....................................................................................................... 18
4.2.4 Video Mask.................................................................................................................. 18
4.2.5 ROI Configuration........................................................................................................ 19
4.2.6 Lens Control................................................................................................................. 20
4.3 PTZ Configuration........................................................................................................................ 21
4.4 Alarm Configuration..................................................................................................................... 21
4.4.1 Motion Detection.......................................................................................................... 21
4.4.2 Other Alarms................................................................................................................ 23
4.4.3 Alarm In ....................................................................................................................... 24
4.4.4 Alarm Out..................................................................................................................... 25
4.4.5 Alarm Server ................................................................................................................ 26
4.5 Event Configuration...................................................................................................................... 26
4.5.1 Object Removal............................................................................................................ 27
4.5.2 Exception...................................................................................................................... 29
4.5.3 Line Crossing ............................................................................................................... 30
4.5.4 Intrusion ....................................................................................................................... 33
4.5.5 Crowd Density Detection.............................................................................................. 35
4.5.6 People Intrusion............................................................................................................ 37
4.5.7 People Counting ........................................................................................................... 38
4.6 Network Configuration ................................................................................................................. 41
4.6.1 TCP/IP.......................................................................................................................... 41
4.6.2 Port............................................................................................................................... 42
4.6.3 Server Configuration .................................................................................................... 43
4.6.4 DDNS........................................................................................................................... 43
Network Camera User Manual
4.6.5 SNMP........................................................................................................................... 44
4.6.6 802.1x........................................................................................................................... 45
4.6.7 RTSP ............................................................................................................................ 46
4.6.8 UPNP ........................................................................................................................... 47
4.6.9 Email............................................................................................................................ 48
4.6.10 FTP............................................................................................................................... 49
4.6.11 QoS............................................................................................................................... 50
4.7 Security Configuration.................................................................................................................. 50
4.7.1 User Configuration....................................................................................................... 50
4.7.2 Online User .................................................................................................................. 51
4.7.3 Block and Allow Lists .................................................................................................. 52
4.8 Maintenance Configuration........................................................................................................... 52
4.8.1 Backup and Restore...................................................................................................... 52
4.8.2 Reboot.......................................................................................................................... 53
4.8.3 Upgrade........................................................................................................................ 53
4.8.4 Operation Log............................................................................................................... 54
5Search ...........................................................................................................................55
5.1 Photo Search................................................................................................................................. 55
5.2 Video Search................................................................................................................................. 56
5.2.1 Local Video Search....................................................................................................... 56
5.2.2 SD Card Video Search.................................................................................................. 57
Appendix................................................................................................................................59
Appendix 1 Q & A.................................................................................................................59
Appendix 2 Installation of Water-proof Rubber Plug .......................................................60
Appendix 3 Specifications ....................................................................................................61
1
Network Camera User Manual
1Introduction
This IP-CAMERA (short for IP-CAM) is designed for high performance CCTV solutions. It
adopts state of the art video processing chips. It utilizes most advanced technologies, such as
video encoding and decoding technology, complies with the TCP/IP protocol, SoC, etc to
ensure this system more stable and reliable.
This product is widely used in banks, telecommunication systems, electricity power
departments, law systems, factories, storehouses, uptowns, etc. In addition, it is also an ideal
choice for surveillance sites with middle or high risks.
Main Features
ICR auto switch, true day/night
3D DNR, true WDR
ROI coding
Support BLC, Defog, Anti-flicker
Support smart phone, iPad, remote monitoring
Surveillance Application
2
Network Camera User Manual
2IE Remote Access
You may connect IP-Cam via LAN or WAN. Here only take IE browser (6.0) for example.
The details are as follows:
2.1 LAN
In LAN, there are two ways to access IP-Cam: 1. access through IP-Tool; 2. directly access
through IE browser.
2.1.1 Access through IP-Tool
Network connection:
①Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the
PC from the CD.
②Double click the IP-Tool icon on the desktop to run this software as shown below:
③Modify the IP address. The default IP address of this camera is 192.168.226.201. Click the
information of the camera listed in the above table to show the network information on the
right hand. Modify the IP address and gateway of the camera and make sure its network
address is in the same local network segment as that of the computer. Please modify the IP
address of your device according to the practical situation.
3
Network Camera User Manual
For example, the IP address of your computer is 192.168.1.4. So the IP address of the camera
shall be changed to 192.168.1.X. After modification, please input the password of the
administrator and click “Modify” button to modify the setting.
④Double click the IP address and then the system will pop up the IE browser to connect
IP-CAM. Download, install and run the Active X control.
Input the username and password in the login window to log in. (You can modify the default
username and password for your first login for some versions)
2.1.2 DirectlyAccess through IE
The default network settings are as shown below:
IP address: 192.168.226.201
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
The default password of the administrator is “123456”.
The default username is “admin”; the default password is “123456”.
4
Network Camera User Manual
You may use the above default settings when you log in the camera for the first time. You may
directly connect the camera to the computer through network cable.
①Manually set the IP address of the PC and the network segment should be as the same as
the default settings of the IP camera. Open the network and share center. Click “Local Area
Connection” to pop up the following window.
Select “Properties” and then select internet protocol according to the actual situation (for
example: IPv4). Next, click “Properties” button to set the network of the PC.
5
Network Camera User Manual
②Open the IE browser and input the default address of IP-CAM and confirm.
③Download, install and run the Active X control.
④Input the default username and password in the login window and then enter to view.
2.2 WAN
Access through the router or virtual server
①Make sure the camera is well connected via LAN and then log in the camera via LAN and
go to ConfigNetworkPort menu to set the port number.
Port Setup
②Go to Config NetworkTCP/IP menu to modify the IP address.
6
Network Camera User Manual
IP Setup
③Go to the router’s management interface through IE browser to forward the IP address and
port of the camera in the “Virtual Server”.
Router Setup
④Open the IE browser and input its WAN IP and http port to access. (for example, if you
change your http port as 81, you may input “192.198.1.201:81” in the address bar of web
browser to access).
Access through PPPoE dial-up
Network connection
You may access the camera through PPPoE auto dial-up. The setting steps are as follow:
Altri manuali per PAR 4MP Series
1
Indice
Altri manuali Paramont Telecamera IP
