Parkside PGG 15 B1 Manuale utente
POWER ENGRAVING TOOL PGG 15 B1
POWER ENGRAVING TOOL
Operation and Safety Notes
Translation of original operation manual
GRAVÍROZÓ KÉSZÜLÉK
Kezelési és biztonsági utalások
Az originál használati utasítás fordítása
APARAT ZA GRAVIRANJE
Navodila za upravljanje in varnostna opozorila
Prevod originalnega navodila za uporabo
GRAVÍROVAČKA
Pokyny pre obsluhu a bezpečnostné pokyny
Preklad originálneho návodu na obsluhu
GRAVIERGERÄT
Bedienungs- und Sicherheitshinweise
Originalbetriebsanleitung
IAN 96760
GB Operation and Safety Notes Page 5
HU Kezelési és biztonsági utalások Oldal 19
SI Navodila za upravljanje in varnostna opozorila Stran 37
SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 53
DE/AT/CH Bedienungs- und Sicherheitshinweise Seite 67
Before reading, unfold the page containing the illustrations and familiarise yourself with all
functions of the device.
Olvasás előtt kattintson az ábrát tartalmazó oldalra és végezetül ismerje meg a készülék
mindegyik funkcióját.
Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.
Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend
mit allen Funktionen des Gerätes vertraut.
B
1 2
45
6
A
7
3
5GB
Table of contents
Introduction
Proper use................................................................................ Page 6
Features and equipment......................................................... Page 6
Included items ......................................................................... Page 7
Technical details...................................................................... Page 7
General power tool safety warnings......... Page 8
1. Work area safety................................................................Page 9
2. Electrical safety................................................................... Page 9
3. Personal safety.................................................................... Page 10
4. Power tool use and care.................................................... Page 11
5. Service................................................................................. Page 12
Operation
Switching on/off .................................................................... Page 12
Setting the cutting depth......................................................... Page 13
Changing the engraving point ............................................... Page 13
Advice on use.......................................................................... Page 14
Cleaning ............................................................................... Page 14
Service................................................................................... Page 15
Warranty............................................................................. Page 15
Disposal................................................................................ Page 16
Translation of the original declaration
of conformity/Manufacturer............................. Page 17
6 GB
Introduction
Introduction
Power engraving tool PGG 15 B1
Introduction
We congratulate you on the purchase of your new device. You have
chosen a high quality product. The instructions for use are part of the
product. They contain important information concerning safety, use
and disposal. Before using the product, please familiarise yourself with
all of the safety information and instructions for use. Only use the unit
as described and for the specified applications. If you pass the product
on to anyone else, please ensure that you also pass on all the docu-
mentation with it.
Proper use
This product is intended for engraving or decorating materials such
as metal, plastic, glass, ceramic, wood, leather and stone. Any other
use or modification to the drill/grinder shall be considered as improper
use and could give rise to considerable dangers. The manufacturer will
not accept liability for loss or damage arising from improper use. Not
intended for commercial use.
Features and equipment
1ON/OFF switch
2Stroke rate rotary controller
3Hanging eye
4Mains lead
7GB
Introduction
Introduction
5Engraving point
6Engraving point holder
7Engraving stencils
Included items
1 Power engraving tool PGG 15 B1
2 Engraving stencils
1 Operating instructions
Technical details
Rated voltage: 230V∼ 50Hz
Mode of operation: intermittent operation: S3 20%
Note: A duty cycle (in %) defines explicitly the maximum continuous
duration of use and the subsequent rest period. In this case the tool
requires a cooling phase of eight minutes after an operating period of
two minutes, for example.
Rated current: 0.15A
Stroke rate: 6000min-1
Noise and vibration data:
Measured values for noise are determined in accordance with
EN 60745. The A-weighted noise level of the electrical power tool
are typically:
Sound pressure level: 74.4dB(A)
Sound power level: 85.4dB(A)
Uncertainty K: 3dB
8 GB
General power tool safety warnings
Introduction/General power tool safety warnings
Wear ear protection!
Evaluated acceleration, typical:
Hand/arm vibration: 1.582m/s2
Uncertainty K = 1.5m/s2
The vibration level specified in these instructions was
measured in accordance with an EN 60745 standardised measurement
process and can be used to compare equipment. The vibration emission
value specified can also serve as a preliminary assessment of the ex-
posure.
The vibration level will change according to the application of the elec-
trical tool an in some cases may exceed the value specified in these in-
structions. Regularly using the electric tool in such a way may make it
easy to underestimate the vibration.
Note: If you wish to make an accurate assessment of the vibration
loads experienced during a particular period of working, you should
also take into account the intervening periods of time when the device
is switched off or is running but is not actually in use. This can result in
a much lower vibration load over the whole of the period of working.
General power tool safety warnings
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
9GB
General power tool safety warnings
Introduction/General power tool safety warnings
The term “power tool” in the warnings refers to your mains-operated
(corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carry-
ing, pulling or unplugging the power tool. Keep cord
away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
10 GB
General power tool safety warnings
General power tool safety warnings
e) When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a) Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropri-
ate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a rotat-
ing part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool in un-
expected situations.
f) Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
Altri manuali per PGG 15 B1
3
Questo manuale è adatto per i seguenti modelli
1
Indice
Lingue:
Altri manuali Parkside Stampante
Parkside
Parkside PGG 15 A1 Manuale utente
Parkside
Parkside 337019 2001 Manuale utente
Parkside
Parkside PMGS 12 Manuale utente
Parkside
Parkside PMGS 12 C3 Manuale utente
Parkside
Parkside PGG 15 D3 Manuale utente
Parkside
Parkside PGG 15 A1 Manuale utente
Parkside
Parkside PMGS 12 C3 Manuale utente
Parkside
Parkside PGG 15 B1 Manuale del proprietario
Parkside
Parkside PGG 15 A1 Manuale utente
Parkside
Parkside PGG 15 A1 Manuale utente
