Partex Primacy Manuale utente

2016-05-26

Quick Start

PRIMACY

Printing settings and winsign

English

Svenska

Quick Start Primacy

Before Printing

•Install the printer according to the supplier´s instructions, please see the PRIMACY

user guide (page 5-12) at the installation CD. See recommendations for PFC cards,

ribbons and printing settings at page 4 in this guide.

•Choose Moca as a default printer in Windows.

•Load ribbon

Load ribbon according to instructions for the print.

1. Open the cover

2. Insert the ribbon as shown. See recommendations for ribbons page 4.

3. Close the cover and press until a click is heard.

English

Quick Start Primacy

•Adjusting the Card thickness

1. Open the card feeder on the printer.

2. Adjust the thickness of the cards used by moving the gauge from right to left to the desired

card thickness. See recommendations card thickness at page 4.

3. Then close the feeder.

Quick Start Primacy

Recommendations PFC cards, ribbons and settings for card thickness

PFC cards

Ribbon

Settings for card thickness

PFC 04212 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 04215 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 04218 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 04221 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 04230 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 09540 (Polyamide)

RCT019NAA

0.76

PFC 09580 (Polyimide)

RCT019NAA

0.76

PFC 09518 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 07533 (ABS)

RCT023NAA + RCT019NAA

0.76

•Install Partex software, WinSign.

WinSign 6.x Latest version is available for download (for registered users) together with

a software manual, on www.partex.nu. Follow the software instruction.

•Set printing settings

Choose Matica Printer Manager in the start menu, then click the icon for Matica on the taskbar.

A print setting for your printer opens.

•Click on the button Preferences.

Quick Start Primacy

•Under the tab for Card, make following changes.

•Mark landscape.

•Mark 180° rotation.

•Under the tab for Media, make following changes.

•Change Greyscale

to Average Threshold.

•Change Energy to 15.

•Apply.

Quick Start Primacy

Printing

•Load media according to the supplier´s instructions.

•Place the cards in the feeder as described below.

•Start the software and follow the instructions in the WinSign user manual.

The glossy side of the PFC cards must be placed up.

The cards lower part, where the sorting information

will be written, must be placed to the left in the

feeder.

NOTE. The cards are slightly bent and may not

feed properly. Please bend them carefully to

straighten the cards and place them in the feeder.

Quick Start Primacy

Före utskrift

•Installera skrivaren enligt leverantörens instruktioner i användarmanualen (se sid 5-

12) på installations CD. Se rekommendationer för PFC kort, färgband och

skrivarinställningar på sidan 9i denna guide.

•Välj Moca som standardskrivare.

•Installera färgband enligt instruktioner för skrivaren.

1. Öppna locket

2. Placera färgband enligt nedan. Se rekommendationer för färgband på sid 9i denna

guide.

3. Stäng locket och tryck tills ett klick hörs.

Quick Start Primacy

•Justera korttjocklecken

4. Öppna skrivarens kortmatare.

5. Justera korttjockleken genom att flytta inställningsspaken från höger till vänster. Se

rekommendationer på korttjocklek på sidan 9.

6. Stäng locket.

Quick Start Primacy

Rekomendationer för PFC kort, färgband och inställningar för korttjocklek.

PFC kort

Färgband

Inställningar för korttjocklek.

PFC 04212 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 04215 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 04218 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 04221 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 04230 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 09540 (Polyamid)

RCT019NAA

0.76

PFC 09580 (Polyimid)

RCT019NAA

0.76

PFC 09518 (ABS)

RCT023NAA + RCT019NAA

0.76

PFC 07533 (ABS)

RCT023NAA + RCT019NAA

0.76

•Installera Partex software, WinSign.

WinSign 6.x Senaste versionen finns tillgänglig för registrerade användare på

www.partex.se. Här finns även en användarmanual för mjukvaran,

följ dess instruktioner för installation.

Gör skrivarinställningar

Välj Matica Printer Manager i startmenyn. Klicka sedan på ikonen för Matica i

aktivitetsfältet. En utskriftsinställning för skrivaren öppnas.

Klicka på knappen för Preferences.

Quick Start Primacy

•Gör följande ändringar under fliken “Card”.

-Markera Landscape.

-Markera 180° rotation.

•Gör följande ändringar under fliken ”Media”.

•Ändra Greyscale

till Average Threshold

•Ändra Energy till 15.

•Verkställ.

Indice

Lingue:

Altri manuali Partex Stampante

Partex

Partex PROMARK T-800 Manuale utente

Partex

Partex MK10 Manuale utente

Partex

Partex ProMark T-2000 Manuale utente

Partex

Partex ProMark T-2000 Manuale utente

Partex

Partex PROMARK T-800 Manuale utente

Partex

Partex Moca Manuale utente

Partex

Partex ProMark MK9 Manuale utente

Partex

Partex ProMark T-1000 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente