pathway eGlass Manuale utente
!
What's In the Box?
This is a user manual for the eGlass Station Podium ONLY. For the full eGlass
Lightboard user manual, instructional videos, software downloads, and further
training and support, visit the eGlass Academy by scanning this QR Code with
your phone, or by visiting https://www.eglass.io/support
Note:
User Manual
!
1
2
3
4
5
6
7
8
9
10
13
11
12
15
16
18
What’s in the Box
14
17
Or
Podium Surface
10mm M5 Hex Bolt (4x)
Power Cord
Pillar
15mm M5 Hex Bolt (4x)
eGlass Power Cable
Wheel Base
M5 Thumbscrews (12x)
Pen Holder
Foot Pedal
35” eGlass Brackets
M5 Hex Driver
Wheels (4x)
50” eGlass Brackets
3mm Allen Key
M5 Hex Screw (10x)
Power Adapter
Wheel Wrench
3
12
11
8
1
15
14
13
2
6
16
4
9
10
17
7
18
5
Or
!
Diagram
Accommodates
Laptop Stand
Accommodates
35” or
50” eGlass
Lightboards
Podium Surface
with Multiple
Mounting
Positions
Brackets for
35” and 50”
eGlass Included
Pen
Holder
Pullout Mouse &
Keyboard Tray
Sit/Stand Height
Adjustable Podium
Podium Wheel Base
Lockable 360º
Heavy Duty Casters
Height Adjustment
Foot Pedal
!
Step 1:
Place the Podium Surface
upside-down on a flat
surface, and pull out the
mouse and keyboard tray
to expose the mounting
holes.
Step 2:
Align the Pillar with the
recessed holes in the
Podium Surface, and use
the M5 Hex Driver and
10x M5 Hex Screws
(pointed tip) to fasten
them together.
10x
Assembling Podium
Step 2:
Use the M5 Hex Driver
to secure the Foot
Pedal to the
underside of the
Wheel Base with the
shorter 10mm M5 Hex
Bolts (4x)
4x
!
Step 3:
Use the Wheel
Wrench to tighten
the 4x Wheels to the
Wheel Base
Step 4:
Use the M5 Hex Driver and
the 4x longer 15mm M5 Hex
Bolts to fasten the Wheel
Base to the Pillar.
Important: Make sure you
install the wheel base so that
its height-adjustment Foot
Pedal is on the same side as
the pullout mouse and
keyboard tray.
4x
Step 5:
Flip the assembled podium
right-side up.
Assembling Podium
!
Step 1:
First, select the
Mounting Brackets
based on the size of
the eGlass being
mounted.
50” Mounting
Brackets
35” Mounting
Brackets
Step 2:
Position the Mounting
Brackets in the
desired location on
the Podium Surface.
A Note About Mounting Positions:
There are five positions the mounting brackets can be secured in to position the
glass surface closure or further away from the user. Please consider where you
would like to station your laptop before selecting a position.
We recommend positioning the eGlass in the forward position (closest to the user
and closest to the keyboard tray) in order to make room for the laptop behind
the glass. This position also minimizes the distance that the camera arm
protrudes from the podium surface.
Mounting eGlass
Forward Position
Laptop Behind Glass
(Recommended)
Rear Position
Laptop In Front Of Glass
!
Step 3:
Use 4x M5 Thumbscrews
to secure the Mounting
Brackets in the desired
location on the Podium
Surface.
Step 4:
Carefully lower the
eGlass frame into the
Mounting Brackets,
and use 6x M5
Thumbscrews to
secure the eGlass
frame.
Mounting eGlass
4x
6x
!
eGlass Station has a built-in battery to
power the eGlass Lightboard. Connect
one end of the eGlass Power Cable to
the power input on the left side of the
eGlass lightboard, and the other end into
the 24V 5A power-outlet located on the
left underside of the Podium Surface.
Powering On
To power on (and off) the eGlass Station battery, activate the
Power Switch located on the left underside of the Podium Surface.
Connecting and Powering-On
!
Charging
The eGlass Station battery must be charged routinely.
To charge the station, first connect the Power Cord to the Power
Adapter, and then connect the Power Adapter to the 19V 9.47A
power-in located on the left underside of the Podium Surface.
Finally, connect the 3-prong Type A Power Cord into a 110V wall
outlet to charge the station. Charging takes about 6 hours.
Battery life may vary depending on the brightness
setting of the eGlass lights, and if a laptop or other
accessories are being charged (see next page):
35” eGlass: ~3 - 7 hours
50” eGlass: ~2 - 6 hours
Charging time: 6 hours
Battery Indicator:
View the current battery level by
pressing the battery indicator button:
3 lights: 75% - 100% remaining
2 lights: 50% - 75% remaining
1 light: 25% - 50% remaining
1 light (flashing): less than 25% remaining
!
Powering Laptop and Accessories
USB-A
USB-C
When the podium is powered-on, it’s battery can also power or
charge compatible USB devices (like a USB-C laptop) by
connecting the devices to either the 100W USB-C port or 30W
USB-A port located on the backside of the Podium Surface.
Please note that the podium’s battery life will decrease as more
devices are connected and drawing power from the battery.
Altri manuali per eGlass
2
Indice
