Patton electronics COPPER LINK 2174 Manuale utente

USER

MANUAL

MODEL 2174

CopperLINK™ High Speed

Ethernet Extender

SALES OFFICE

(301) 975-1000

TECHNICAL SUPPORT

(301) 975-1007

Part# 07M2174-UM

Rev. A

Revised 9/23/11

An ISO-9001Certified

Company

This is a Class A device and is not intended for

use in a residential environment.

CONTENTS

1.0 Warranty Information ................................................................. 4

1.1 Regulatory Information ................................................................. 4

EMC Directive:.............................................................................. 4

Low-Voltage Direcive (Safety):..................................................... 4

PSTN:........................................................................................... 4

1.2 Radio and TV Interference (FCC Part 15).................................... 4

1.3 CE Declaration of Conformity....................................................... 5

1.4 Authorized European Representative........................................... 5

1.5 Service.......................................................................................... 5

1.6 Safety When Working With Electricity .......................................... 6

2.0 General Information.................................................................... 8

2.1 Features........................................................................................ 8

2.2 Description.................................................................................... 8

3.0 Installation................................................................................... 9

3.1 Connecting the Line Interface..................................................... 11

Connecting the Line Interface for Model 2174/EUI or 2174/TB.. 11

Connecting the Line Interface for Model 2174/BNC................... 12

3.2 Connecting the 10/100Base-T Ethernet Interface ...................... 12

3.3 Connecting Power ...................................................................... 13

4.0 Configuration ............................................................................ 13

4.1 Configuring the Hardware DIP switches..................................... 13

4.2 Configuring DIP Switch S1 ......................................................... 14

Switch S1-1: Local/Remote Configuration.................................. 15

Switches S1-2 and S1-3: Symmetric/Asymmetric Operation ..... 15

Switch S1-5: General Protection (Signal to Noise Ratio) ........... 15

5.0 Operation................................................................................... 16

5.1 Front Panel LED Status Monitors ............................................... 16

Specifications ........................................................................... 17

A.1 LAN Connection ......................................................................... 17

A.2 Transmission Line ....................................................................... 17

A.3 CopperLINK Line Rate and CopperLINK Distance .................... 17

A.4 LED Status Indicators ................................................................. 17

A.5 Power Supply .............................................................................. 17

A.6 Temperature Range .................................................................... 17

A.7 Humidity ...................................................................................... 17

A.8 Dimensions ................................................................................. 17

Model 2174 Series Factory

Replacement Parts and Accessories...................................... 18

Model 2174 Series Interface Pin Assignment ........................ 19

C.1 10/100Base-T Interface .............................................................. 19

RJ-45.......................................................................................... 19

C.2 CopperLINK Interface ................................................................ 19

RJ-45.......................................................................................... 19

Terminal Block............................................................................ 19

Line Rate & Reach Chart, Based on 24 AWG (0.5 MM) ......... 20

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 2174 components to be free from

defects, and will—at our option—repair or replace the product should it

fail within one year from the first date of the shipment.

This warranty is limited to defects in workmanship or materials, and does

not cover customer damage, abuse or unauthorized modification. If this

product fails or does not performs as warranted, your sole recourse shall

be repair or replacement as described above. Under no condition shall

Patton Electronics be liable for any damages incurred by the use of this

product. These damages include, but are not limited to, the following: lost

profits, lost savings and incidental or consequential damages arising

from the use of or inability to use this product. Patton Electronics spe-

cifically disclaims all other warranties, expressed or implied, and the

installation or use of this product shall be deemed an acceptance of

these terms by the user.

Note Conformity documents of all Patton products can be viewed

online at www.patton.com under the appropriate product page.

1.1 REGULATORY INFORMATION

EMC Directive:

• FCC Part 15, Class A

• EN55022, Class A

• EN55024

• A-tick

Low-Voltage Direcive (Safety):

• IEC/EN60950-1, 2nd Edition

• AS/NZS 60950-1, A-tick

PSTN:

• This device is not intended nor approved for connection to the PSTN

1.2 RADIO AND TV INTERFERENCE (FCC PART 15)

This device generates and uses radio frequency energy, and if not

installed and used properly-that is, in strict accordance with the manufac-

turer’s instructions-may cause interference to radio and television recep-

tion. The device has been tested and found to comply with the limitsfor a

Class A computing device in accordance with specifications in Subpart B

of Part 15 of FCC rules, which are designed to provide reasonable pro-

tection from such interference in a commercial installation. However,

there is no guarantee that interference will not occur in a particular instal-

lation. If the device does cause interference to radio or television recep-

tion, which can be determined by disconnecting the unit, the user is

encouraged to try to correct the interference by one or more of the follow-

ing measures: moving the computing equipment away from the receiver,

re-orienting the receiving antenna and/or plugging the receiving equip-

ment into a different AC outlet (such that the computing equipment and

receiver are on different branches).

1.3 CE DECLARATION OF CONFORMITY

Patton Electronics, Inc declares that this device is in compliance with the

essential requirements and other relevant provisions of Directive

2004/108/EC relating to electromagnetic compatibility and Directive

2006/95/EC relating to electrical equipment designed for use within cer-

tain voltage limits. The Declaration of Conformity may be obtained from

Patton Electronics, Inc at www.patton.com/certifications.

The safety advice in the documentation accompanying this device shall

be obeyed. The conformity to the above directive is indicated by CE

mark on the device.

1.4 AUTHORIZED EUROPEAN REPRESENTATIVE

D R M Green

European Compliance Services Limited.

Avalon House, Marcham Road

Abingdon, Oxon OX14 1UD, UK

1.5 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid

and insured to Patton Electronics. All returns must have a Return Materi-

als Authorization number on the outside of the shipping container. This

number may be obtained from Patton Electronics Technical Services at:

•Tel:+1 (301) 975-1007

•Email:support@patton.com

• URL: http://www.patton.com

Note Packages received without an RMA number will not be

accepted.

1.6 SAFETY WHEN WORKING WITH ELECTRICITY

• This device contains no user serviceable parts. This

device can only be repaired by qualified service per-

sonnel.

• Do not open the device when the power cord is con-

nected. For systems without a power switch and without

an external power adapter, line voltages are present

within the device when the power cord is connected.

• For devices with an external power adapter, the power

adapter shall be a listed Limited Power Source. The

mains outlet that is utilized to power the device shall be

within 10 feet (3 meters) of the device, shall be easily

accessible, and protected by a circuit breaker in com-

pliance with local regulatory requirements.

• For AC powered devices, ensure that the power cable

used meets all applicable standards for the country in

which it is to be installed.

• For AC powered devices which have 3 conductor

power plugs (L1, L2 & GND or Hot, Neutral &

Safety/Protective Ground), the wall outlet (or socket)

must have an earth ground.

• For DC powered devices, ensure that the interconnect-

ing cables are rated for proper voltage, current, antici-

pated temperature, flammability, and mechanical

serviceability.

• WAN, LAN & PSTN ports (connections) may have haz-

ardous voltages present regardless of whether the

device is powered ON or OFF. PSTN relates to inter-

faces such as telephone lines, FXS, FXO, DSL, xDSL,

T1, E1, ISDN, Voice, etc. These are known as “hazard-

ous network voltages” and to avoid electric shock use

caution when working near these ports. When discon-

necting cables for these ports, detach the far end con-

nection first.

• Do not work on the device or connect or disconnect

cables during periods of lightning activity.

WARNING

In accordance with the requirements of council direc-

tive 2002/96/EC on Waste of Electrical and Electronic

Equipment (WEEE), ensure that at end-of-life you sepa-

rate this product from other waste and scrap and deliver

to the WEEE collection system in your country for recy-

cling.

This device contains no user serviceable parts. This

device can only be repaired by qualified service per-

sonnel.

This device is NOT intended nor approved for connec-

tion to the PSTN. It is intended only for connection to

customer premise equipment.

Electrostatic Discharge (ESD) can damage equipment

and impair electrical circuitry. It occurs when electronic

printed circuit cards are improperly handled and can

result in complete or intermittent failures. Do the fol-

lowing to prevent ESD:

• Always follow ESD prevention procedures when

removing and replacing cards.

• Wear an ESD-preventive wrist strap, ensuring that it

makes good skin contact. Connect the clip to an

unpainted surface of the chassis frame to safely chan-

nel unwanted ESD voltages to ground.

• To properly guard against ESD damage and shocks,

the wrist strap and cord must operate effectively. If no

wrist strap is available, ground yourself by touching the

metal part of the chassis.

WARNING

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This

product has been thoroughly inspected and tested and is warranted for

one year for parts and labor. If any questions or problems arise during

installation or use of this product, contact Patton Electronics Technical

Support at +1 (301) 975-1007.

2.1 FEATURES

• Variable rate CopperLINK extender - Easy to configure

• Auto-MDIX Ethernet

• Configurable 10/100, Full/Half, and Auto-Negotiating Ethernet

• Extends up to 4x 10/100Base-TX Ethernet beyond 328-foot (100-

meter) limitation over a single twisted-pair, Cat 5e/6/7, or coaxial cable

• Symmetric or asymmetric settings via DIP switch

• Transparent operation

• LED indicators for Power, DSL Link, Ethernet Link/Activity, Remote and

Local

2.2 DESCRIPTION

The Patton Electronics Model 2174 CopperLink modems provide high-

speed LAN connections between peered Ethernet LANs, remote PCs, or

any other network-enabled 10/100Base-T device.

Operating in pairs, one Model 2174 is configured as the (L) Local unit

located at one end of the LAN extension and the other Model 2174 is con-

figured as the (R) Remote unit at the other end. The Model 2174 is config-

ured as a L or R via the switch on the bottom of the unit. These units can

automatically forward LAN broadcasts, multicasts, and frames across a 2-

wire voice-grade twisted-pair or BNC link. The data is passed transpar-

ently (unmodified) through the 2174s. The 2174s automatically add and

delete MAC addresses, only passing packets across the CopperLINK link

that are meant for the remote peered LAN.

Figure 1. Typical application

The pair of 2174 models work together to create a transparent extension

between two peered Ethernet LANs using twisted pair (2-wire), Cat5+, or

75-ohm BNC. Figure 1 shows a typical point-to-point application.

3.0 INSTALLATION

To install the 2174 Ethernet Extender, do the following:

1. Connect the line interface between the units (refer to section 3.1,

“Connecting the Line Interface” on page 11)

Note See Figure 2 for the Model 2174’s rear panel arrangements.

2. Connect the Ethernet interface (refer to section 3.2, “Connecting the

10/100Base-T Ethernet Interface” on page 12).

3. Connect the power plug (refer to section 3.3, “Connecting Power” on

page 13).

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

perature, flammability, and mechanical serviceability.

CAUTION

Figure 2. Model 2174 rear panel options

Eth3

Eth0 Eth1 Eth2

12VDC 1A

Eth3

Eth0 Eth1 Eth2

12VDC 1A

Eth3

Eth0 Eth1 Eth2

12VDC 1A

Altri manuali per COPPER LINK 2174

Indice

Altri manuali Patton electronics Estensione

Patton electronics

Patton electronics EnviroNET EHA2168 Manuale utente

Patton electronics

Patton electronics CopperLINK 2173 Manuale utente

Patton electronics

Patton electronics Industrial Ethernet Extender with LCD Interface... Manuale di istruzioni

Patton electronics

Patton electronics CopperLink 2158 Manuale utente

Patton electronics

Patton electronics 2113 Manuale utente

Patton electronics

Patton electronics 1068 Manuale utente

Patton electronics

Patton electronics CopperLINK 2173 Manuale utente

Patton electronics

Patton electronics CopperLink 2156 Manuale utente

Patton electronics

Patton electronics EnviroNet Ethernet Extenders Manuale utente

Patton electronics

Patton electronics 2156 Manuale utente

Patton electronics

Patton electronics 2173R Manuale utente

Patton electronics

Patton electronics CopperLink 07M2160-GS Manuale utente

Patton electronics

Patton electronics EnviroNET EHA2172 Manuale utente

Patton electronics

Patton electronics COPPERLINK 2151 Manuale utente

Patton electronics

Patton electronics CopperLink Ethernet Extenders 2158A Manuale utente

Patton electronics

Patton electronics 2156 Manuale utente

Patton electronics

Patton electronics CopperLink 2158 Manuale utente

Patton electronics

Patton electronics CopperLink 2160 Series Manuale utente

Patton electronics

Patton electronics CopperLINK 2172 Manuale utente

Patton electronics

Patton electronics CopperLink 2160 Series Manuale utente

Patton electronics

Patton electronics CopperLink 2168 Manuale utente

Patton electronics

Patton electronics Industrial Ethernet Extender with LCD Interface... Manuale utente

Patton electronics

Patton electronics 1173R Manuale utente

Patton electronics

Patton electronics CopperLink Ethernet Booster 2110 Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente