Pax Technology D220 Manuale utente

PAX D220 Quick Setup Guide

PAX Technology® 1 20180801 v1.1

[email protected]

(877) 859-0099

www.pax.us

PAX D220 Mini POS

Quick Setup Guide

PAX D220 Quick Setup Guide

20180801 v1.1 2 PAX Technology®

[email protected]

(877) 859-0099

www.pax.us

1PAX D220 Features

The sleek and elegant D220 comes with state-of-

the-art technology including:

•Cortex A9processor

•Flash 512MB+DDR 512MB

•MagStripe, EMV Chip, NFC

•PCI 4.x certified, SRED

•Optional wireless power charger

•1Micro SAM slot

•1Micro SIM slot

•1SD Card slot

•3G, 4GLTE, Bluetooth® wireless technology,Wi-Fi

2What’s in The Box

PAX D220 Quick Setup Guide

PAX Technology® 3 20180801 v1.1

[email protected]

(877) 859-0099

www.pax.us

3D220 Front Side

4D220 Back Side

PAX D220 Quick Setup Guide

20180801 v1.1 4 PAX Technology®

[email protected]

(877) 859-0099

www.pax.us

5D220 Power Button and USB

Port

6D220 Charging Instructions

Plug in the USB AC adapter.

Plug the standard USB end of the cable to the

AC adapter or a PC USB port.

Plug the micro USB end of the cable into the

micro USB port on the D220 terminal.

Allow the battery to charge until full.

NOTE

Battery must remain installed for proper operation.

7D220 Power On/Off

Power on the terminal by pressing and holding

the power button down for 3-5 seconds and

then release.

Power off the terminal by pressing and holding

the power button down for 3 to 5 seconds and

then release.

PAX D220 Quick Setup Guide

PAX Technology® 5 20180801 v1.1

[email protected]

(877) 859-0099

www.pax.us

8D220 Communication Setup

The D220 supports Wi-Fi for network and internet

access. To communicate with the host, other

devices, and/or download applications, you must

first configure communication settings.

This guide only describes setting up Wi-Fi for the

first time for following options:

•Basic Wi-Fi

•Static IP (SSID Visible)

•Static IP (SSID Not Visible)

•Proxy Server Manual Setup

8.1 D220 Basic Wi-Fi Setup

The only purpose for setting up Wi-Fi out of the box

is to allow the terminal to download its working

application. After this initial setup, the terminal

settings are changed through the application as

configured in BroadPOS.

Configure the terminal Wi-Fi settings as follows.

Power on the terminal and wait for the IDLE

screen to display.

From the IDLE screen press and hold the Cancel

and Enter buttons at the same time for 1 to 3

seconds.

Input the password and press the Enter button.

Use the Right Arrow on the screen, navigate to

and select the Communication option.

Input the password and press the Enter button.

Use the Right Arrow on the screen, navigate to

and select the Wi-Fi Parameters option.

PAX D220 Quick Setup Guide

20180801 v1.1 6 PAX Technology®

[email protected]

(877) 859-0099

www.pax.us

The terminal searches for Wi-Fi networks and

only displays local Wi-Fi networks that have the

SSID broadcast option enabled.

Use the Right and Left Arrows on the screen to

review and select the desired Wi-Fi network.

Select the Password option, input the case-

sensitive password and press the Enter button.

Use the X button on the screen to back out

of the options until you see the “Please Wait,

Wi-Fi Init…” message.

The terminal attempts to connect to the Wi-

Fi network. If the connection is successful, the

network icon at the top of the screen changes

to blue from gray and shows relative signal

strength.

If there is a connection error, the screen

displays, “Please wait Wi-Fi connecting failed”

and returns to the IDLE screen. The terminal

automatically tries to connect again every 30

seconds.

If you receive the connection error, ensure

you have the correct, case sensitive password

and that you are selecting the correct Wi-Fi

network.

Repeat Steps 1 through 6 in this section.

After selecting the Wi-Fi parameters option

(Step 6), use the Right Arrow on the screen,

navigate to and select the Switch Router

option.

The terminal searches for Wi-Fi networks.

PAX D220 Quick Setup Guide

PAX Technology® 7 20180801 v1.1

[email protected]

(877) 859-0099

www.pax.us

Use the Right and Left Arrows on the screen

to review and select the desired Wi-Fi network.

Select the Password option, input the case-

sensitive password and press the Enter button.

Wi-Fi Static IP Setup

(SSID Visible)

If you are required to setup a Wi-Fi connection with

a static IP and you know that the SSID is visible,

perform the steps in this section.

Before you begin configuration, ensure that you

have the correct network information; IP Address,

Subnet mask, Gateway ID, passwords, etc.

If you are required to setup a Wi-Fi connection with

a static IP and you know that the SSID is NOT

visible, perform the Steps in Section 8.1.2 Wi-Fi

Static IP Setup

(SSID Not Visible).

Perform Steps 1 through 6 as shown in Section

8.1 D220 Basic Wi-Fi Setup.

After selecting the Wi-Fi parameters option

(Step 6), use the Right Arrow on the screen,

navigate to and select the Switch Router

option.

The terminal searches for Wi-Fi networks.

Use the Right and Left Arrows on the screen to

review and select the desired Wi-Fi network.

Select the Password option, input the case-

sensitive password and press the Enter button.

Select the DHCP Type option and select Static.

Select the IP Address option, input the IP

Address, and press the “Enter” button.

PAX D220 Quick Setup Guide

20180801 v1.1 8 PAX Technology®

[email protected]

(877) 859-0099

www.pax.us

Select the Subnet Mask option, input the

Subnet Mask, and press the “Enter” button.

Select the Gateway IP option, input the

Gateway IP, and press the “Enter” button.

Select the DNS IP option, input the DNS IP,

and press the “Enter” button.

If the broadcast SSID is disabled on the

access point, the terminal will not display the

SSID on the available Wi-Fi network list. You

will have to manually configure the terminal

for a Static connection.

Wi-Fi Static IP Setup

(SSID Not Visible)

If you are required to setup a Wi-Fi connection with

a static IP and you know that the SSID is not visible,

perform the steps in this section.

Before you begin configuration, ensure that you

have the correct network information; IP Address,

Subnet mask, Gateway ID, passwords, etc.

Perform Steps 1 through 6 as shown in Section

8.1 D220 Basic Wi-Fi Setup.

After selecting the Wi-Fi parameters option

(Step 6), use the Right Arrow on the screen,

navigate to and select the SSID option.

Input the SSID of the desired network.

Select the Security option, select the

appropriate security type for your network and

input the case sensitive Wi-Fi network

password.

Select the DHCP Type option and select Static.

Select the IP Address option and input the IP

Address, and press the “Enter” button.

PAX D220 Quick Setup Guide

PAX Technology® 9 20180801 v1.1

[email protected]

(877) 859-0099

www.pax.us

Select the Subnet Mask option, input the

Subnet Mask, and press the “Enter” button.

Select the Gateway IP option, input the

Gateway IP, and press the “Enter” button.

Select the DNS IP option, input the DNS IP, and

press the “Enter” button.

Wi-Fi Proxy Server (Manual

Setup)

If you are required to setup a Wi-Fi connection via a

proxy server, perform the steps in this section.

Before you begin configuration, ensure that you

have the correct network information; URLs,

Address, Subnet mask, Gateway ID, passwords, etc.

Perform Steps 1 through 6 as shown in Section

8.1 D220 Basic Wi-Fi Setup.

After selecting the Wi-Fi parameters option

(Step 6), use the Right Arrow on the screen,

navigate to and Host Settings option.

Input the case-sensitive password and press

the Enter button.

Select the Host URL Params option.

Select the Auth. URLs option.

Select the Host URL 1 option.

Select the Host URL option and input the host

URL.

Press the Enter button.

Select the Host Port option and input the host

port.

If required, repeat Steps 7 through 9 for the

Host URL 2 option.

PAX D220 Quick Setup Guide

20180801 v1.1 10 PAX Technology®

[email protected]

(877) 859-0099

www.pax.us

9FCC Regulations

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two

conditions: (1) This device may not cause harmful

interference and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

This equipment complies with Part 68 of the FCC

rules and the requirements adopted by the ACTA.

On the body of this equipment is a label that

contains among other information a product

identifier. If requested, this number must be

provided to the telephone company.

10 RF Exposure Information

This device meets the government’s requirement

for exposure to radio waves. This device is

designed and manufactured not to exceed the

emission limits for exposure to radio frequency (RF)

energy set by the Federal Communications

Commission of the U.S. Government.

Indice

Altri manuali Pax Technology Terminale touch

Pax Technology

Pax Technology SK800 Manuale utente

Pax Technology

Pax Technology TSYS A920 Manuale utente

Pax Technology

Pax Technology Smart Kiosk SK300 Manuale utente

Pax Technology

Pax Technology D200 Manuale utente

Pax Technology

Pax Technology PRIORITY A920 Manuale utente

Pax Technology

Pax Technology IM20 Manuale utente

Pax Technology

Pax Technology E600 Manuale utente

Pax Technology

Pax Technology A80 Manuale utente

Pax Technology

Pax Technology D170 Manuale utente

Pax Technology

Pax Technology SP20 Manuale utente

Pax Technology

Pax Technology D180RF Manuale utente

Pax Technology

Pax Technology PX7A Manuale utente

Pax Technology

Pax Technology Aries8 Manuale utente

Pax Technology

Pax Technology A35 Manuale utente

Pax Technology

Pax Technology X5 Manuale utente

Pax Technology

Pax Technology PAXPOS S80 Manuale utente

Pax Technology

Pax Technology D180 Manuale utente

Pax Technology

Pax Technology TSYS A920 Manuale utente

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente