Peak Pro PP260 Scheda tecnica
Product instruction manual
#A3" Pouch Laminating System
Peak Pro - 11PP33011
Peak laminators have been designed to be user
friendly, however we strongly recommend you take
a few minutes to read through this manual to ensure
correct operation.
Keep this manual safe for future reference.
Warranty & Incorrect Use
IMPORTANT INFORMATION
Your laminator should reach you in perfect condition, however please retain all original packaging once you have
unpacked your laminator in case you need to return it. If your laminator arrives damaged or faulty in anyway, this must
be reported to your supplier immediately. If you send your laminator back for repair under warranty at any time, then
the warranty may be void if the laminator is not packaged correctly and as a result is damaged in transit.
Unauthorised repair or attempts to service the unit will invalidate the warranty.
Your Peak Pouch Laminator includes a 2 year warranty on defective parts under normal operating conditions. THIS DOES
NOT COVER any jams, misfeeds or wrap arounds caused by operator error and you will be liable for the repair costs
(including delivery charges). The warranty does not cover the heated rollers. The warranty is for a period of two years
from the date of purchase by the original consumer. To protect the rollers we recommend using our Lifejackets®
Please note that attempting to laminate any type of unsuitable documents (for example multiple cutouts, textiles, food
matter, documents exceeding the maximum thickness or documents too large or small for the pouch) may result in
jamming. Damage caused by incorrect use or failing to follow the instructions are not covered within the warranty.
FAQ’S
My document has come out cloudy - what does this mean?
This means that the temperature setting is not quite hot enough. Try increasing the temperature by 5oC and try again as applying
more heat should x the problem.
My document has come out wavy - what does this mean?
If the document comes out with a wavy nish the temperature is set too high. Decrease the temperature by 5oC and try again. If you
have an important document to laminate such as a photograph, it is always good to try a test document rst to ensure you have the
laminator at the perfect temperature.
Safety!
.
Always remember to switch your pouch laminator o after use. Leaving it on for long periods can cause damage
to the laminator and is a health and safety hazard
.
Always put the sealed end of the pouch or Lifejacket® into the laminator rst
.
NEVER laminate metal objects such as keys or coins
.
NEVER use the laminator near water and do not leave the laminator next to a hot area such as a radiator
.
Always wrap the power cord around safely after use and do not leave it dangling where it could cause an accident
.
Do not allow children to use the laminator, unless supervised
.
If your laminator stops working, do not try to x it yourself by disassembling the machine. Contact your supplier for advice
.
Do not operate the laminator if the power cable is damaged in any way
.
Do not use this appliance for anything other than it’s intended purpose
Technical Specications
How to use your laminator
It is important that you watch your document as you laminate in case of jamming. If your laminating appears to be
jamming, press the REVERSE switch and gently ease the document back out.
Temperature control
Laminating pouch thickness Paper Type Approx temperature (oC)
150 to 200 micron total
(75 + 75 per side up to 100 + 100
per side)
Copy paper (80gsm) 110-120
Photo paper (120gsm) 115-120
Card (200gsm) 115-125
250 to 360 micron total
(125 + 125 per side up to 180 + 180
per side)
Copy paper (80gsm) 120-125
Photo paper (120gsm) 125-130
Card (200gsm) 125-130
360 micron (maximum)
(180 + 180 per side)
Copy paper (80gsm) 130-140
Photo paper (120gsm) 135-140
Card (200gsm) 135-145
Ready light
Power switch
Temperature
control
Forward/Reverse
switch
Heater/Cold
switch
Parts and Features
Diagram 1
Temperature control is designed for laminating pouches and documents of varying thickness. Thicker objects
need more heat. The table below gives an indication of the correct temperature setting required. Please note
this is a guide only. Other factors can aect the laminator such as room temperature and the thickness of
document being laminated.
Thank you for purchasing the Peak Pro PP33011.Peak laminators are designed to give you professional,
high quality results, quickly and easily. Please take a few minutes to read through this important document
as any damage caused to your laminator by user error is not covered under warranty.
xx
Don’t overlap Leave a 5mm border Don’t laminate open
HQGÀUVW
1HYHUODPLQDWHFXWXSSLHFHV
ZLWKRXWXVLQJD/LIHMDFNHWRU\RX
ULVNMDPPLQJDQGGDPDJLQJ
\RXUODPLQDWRUWKLVZLOOQRWEH
FRYHUHGXQGHUZDUUDQW\
x
What is a ‘Lifejacket®’?
The Lifejacket® is a highly durable patented product made from Teon® that should be used when laminating
cut-up, odd shaped pieces (such as shapes, letters, signs as show above) to prevent damage to your laminator
and potential jamming.
Why use a Lifejacket®?
. Protect your laminator from jamming
. Extend the life of your laminator by using the Lifejacket® - stops adhesive seeping onto the rollers
. Eliminate repair bills as this product keeps your laminator working at an optimum level
. Available in A4, A3 and A2 sizes to protect documents of all sizes
Ask your supplier for more details.
Carefully remove the laminator from all of its packaging and place it on a flat, level surface. Make sure you
keep the original packaging somewhere safe (in case this is needed in the future).
Unpack the power cable and insert it into the power outlet at the back of laminator. Plug it in to a power socket.
Press the Red POWER switch to turn the laminator on. The power light will illuminate.
$IFDLUIBUUIF'8%3&7'PSXBSEBOE3FWFSTFTXJUDIJTTFUUP'8%4FFEJBHSBN
3FGFSUPUIFUFNQFSBUVSFDIBSUBOETFUUIFMBNJOBUPSUPUIFSFRVJSFEUFNQFSBUVSF6TFUIJTDIBSUBTBHVJEFPOMZ
4FUUIF)&"5&3TXJUDIUP0/
5IFMBNJOBUPSXJMMOPXCFHJOUPIFBUUIFHSFFO3&"%:MJHIUXJMMCMJOL*GUIFMBNJOBUPSEPFTOhUIFBUJNNFEJBUFMZUVSO
UIF)&"5&3TXJUDI0''UIFOCBDL0/UIFMBNJOBUPSXJMMTUBSUUPIFBU0ODFJUIBTSFBDIFEUIFTFUUFNQFSBUVSFUIF
HSFFO3&"%:MJHIUXJMMJMMVNJOBUF
Place the document you are laminating inside the pouch, making sure that it is centrally positioned and that a small
border (approx 5mm) is left around the edge. If you are laminating cut-up pieces then you need to use a Lifejacket®.
If you do not have one of these, ask your supplier.
Once the document (or small pieces) are positioned in the pouch (and are not overlapping or touching each other),
insert the prepared document into the laminator. Make sure you insert the SEALED EDGE FIRST and do not insertat
an angle. The item will automatically feed through and appear the other end.
!Do not tug or pull the document as it comes out of the back of the laminator.
8IFOUIF-BNJOBUPSJTOPUVTFEGPSNJOVUFTJUXJMMHPJOUP&DPNPEFUIFUFNQFSBUVSFXJMMESPQEPXOUP
P$FWFOUIPVHIUIFUFNQFSBUVSFJTTFUIJHIFS5IF(SFFO3&"%:MJHIUXJMMHP0''
5PXBLFUIFTZTUFNVQ5VSOUIF)&"5&3TXJUDI0''UIFOCBDL0/UIF-BNJOBUPSXJMMTUBSUUPIFBU
8IFOUIF-BNJOBUPSJTOPUVTFEGPSBOPUIFSNJOVUFTJO&DP.PEFNJOVUFTJOUPUBMUIF4ZTUFNXJMM
TUPQSVOOJOHBOEJUXJMMHPJOUP"VUP4IVU0GGNPEF
5PXBLFUIFTZTUFNVQ1PXFS0GGUIFOCBDL0/UVSOUIF)&"5&3TXJUDI0''UIFOCBDL0/UIFMBNJOBUPSXJMMTUBSU
UPIFBUBOE(SFFO3&"%:MJHIUXJMMCMJOL
8IFOUFNQFSBUVSFJTSFBDIFEUIF(SFFOMJHIUXJMMTUBZPO
To turn off the laminator after use, set the HEATER switch to OFF and allow the laminator to still run for 5 minutes
(you will hear the rollers turning). This allows the laminator to cool down and it is then safe to turn the
POWER switch OFF after this time.
Questo manuale è adatto per i seguenti modelli
2
Altri manuali Peak Plastificatrice
Peak
Peak PP-330 Manuale utente
Peak
Peak PeakPro PP-450 Scheda tecnica
Peak
Peak PE332 Manuale utente
Peak
Peak PHS-450 Scheda tecnica
Peak
Peak Peak Performance PS320 Scheda tecnica
Peak
Peak PP-330 Manuale utente
Peak
Peak PE332 Scheda tecnica
Peak
Peak PE332 Manuale utente
Peak
Peak PP-110A Manuale utente
Peak
Peak Peak lite - PL320 Manuale utente
