Pentax IPFC 109 Manuale utente

Operating manual

IPFC

manIPFC_eng_30

Index

1. IPFC Introduction............................................................................................................................................................... 3

2. Safety Instructions............................................................................................................................................................. 3

3. Technical Characteristics ................................................................................................................................................... 4

3.1 Weight and dimensions .......................................................................................................................................................... 5

4. Electric wiring.................................................................................................................................................................... 6

4.1 Protections............................................................................................................................................................................. 11

4.2 Electromagnetic compliance.................................................................................................................................................. 11

4.3 Installation with long motor cables ....................................................................................................................................... 11

5. IPFC installation................................................................................................................................................................12

5.1 IPFC Installation for constant pressure control...................................................................................................................... 15

5.1.1 Pressure tank .............................................................................................................................................................. 15

5.1.2 Pressure sensor........................................................................................................................................................... 15

5.2 IPFC installation for differential constant pressure applications ........................................................................................... 16

5.2.1 Sensors wiring ............................................................................................................................................................. 16

5.2.2 Programming............................................................................................................................................................... 16

6. IPFC Use and Programming...............................................................................................................................................17

6.1 IPFC display ........................................................................................................................................................................... 17

6.2 Initial configuration............................................................................................................................................................... 17

6.2.1 FOC motor control ...................................................................................................................................................... 19

6.3 Initial view ............................................................................................................................................................................. 21

6.4 Menu view............................................................................................................................................................................. 22

6.5 Control parameters ............................................................................................................................................................... 22

6.6 Motor parameters.................................................................................................................................................................. 26

6.7 IN/OUT parameters................................................................................................................................................................ 29

6.8 Connectivity parameters........................................................................................................................................................ 30

7. Protections and alarms.....................................................................................................................................................30

8. Auxiliary pumps during constant pressure control ...........................................................................................................32

8.1 DOL pumps............................................................................................................................................................................ 33

8.2 COMBO function .................................................................................................................................................................... 34

9. Trouble-shooting chart .....................................................................................................................................................37

10. Technical Assistance .......................................................................................................................................................38

1. IPFC Introduction

IPFC is a variable frequency drive designed to control and protect pumping systems by varying the output frequency to the

pump.

IPFC can be applied to both new and existing pumping systems, and provides:

energy and cost savings

simplified installation and an overall lower pumping system cost

longer life of the pumping system and relevant components

improved reliability

IPFC, when connected to any pump, manages the system operation to maintain a certain constant physical quantity

(pressure, differential pressure, flow, temperature, etc.) regardless of the conditions of use. The pump is operated only when

needed thus avoiding unnecessary energy consumption.

IPFC at the same time is able to:

protect the motor from overload and dry running

implement soft start and soft stop to increase the system life and reduce current peaks

provide an indication of current consumption, voltage, and power

maintain a record of run time and display any errors and/or failures reported by the system

control up to two additional pumps at a constant speed (Direct On Line)

connect to other IPFC units for combined operation

Through the use of inductive filters (optional) IPFC eliminates dangerous surges that are induced in long cables, making IPFC

suitable for control of submersible pumps.

2. Safety Instructions

The manufacturer strongly suggests carefully reading this operation manual before using and installing its products

Any operation (installation, maintenance and repair) must be carried out by trained, skilled, and qualified personnel.

Failure to observe and follow the instructions in this manual may result in dangerous and potentially lethal electric shock.

Pay attention to all standard safety and accident prevention regulations

The device must be connected to main power supply via a switch to ensure the

complete disconnection from the network before any operation on the IPFC itself

(including visual inspection) and/or on the connected load.

Disconnect IPFC from the main power supply before commencing any work.

Do not remove, for any reason, the cover and the cable plate without having first

disconnected the device from the main power supply and having waited at least

5 minutes.

IPFC and pumping system must be grounded properly before operation.

For the entire period IPFC is powered, high voltage is present on the output

terminals of the inverter whether or not the pump is running.

Tightening all screws on the cover with washers is recommended before

powering the device. Otherwise, there may be a failure to connect the cover to

ground, creating the risk of electric shock or even death.

Avoid any shock or significant impact during transport.

Check the IPFC immediately upon delivery and check for damage and/or missing parts. If either occurs, immediately notify

the supplier.

Damages due to transport, incorrect installation, or improper use of the device will null and void the warranty.

Tampering or disassembly of any component will automatically void the warranty.

The manufacturer cannot be held responsible for any damages to people and/or property due to improper use of its

products.

Devices marked with this symbol cannot be disposed of in household waste but

must be disposed of at appropriate waste drop-off centres. It is recommended

to contact the Waste Electrical and Electronic Equipment drop-off centres

(WEEE) in the area. If not disposed of properly, the product can have potential

harmful effects on the environment and on human health due to certain

substances present within. Illegal or incorrect disposal of the product is subject

to serious administrative and/or criminal penalties.

3. Technical Characteristics

Model

Vin +/- 15% [V]

Max V out

[V]

Max I in

[A]

Max I out

[A]

P2 motor

power*

[kW]

Size

IPFC 109

1 x 230

1 x Vin

1,1

3 x Vin

1,5

IPFC 114

1 x 230

1 x Vin

1,1

3 x Vin

IPFC 306

3 x 380 - 460

3 x Vin

2,2

IPFC 309

3 x 380 - 460

3 x Vin

13,5

IPFC 314

3 x 380 - 460

3 x Vin

5,5

IPFC 318

3 x 380 - 460

3 x Vin

7,5

IPFC 325

3 x 380 - 460

3 x Vin

IPFC 330

3 x 380 - 460

3 x Vin

IPFC 338

3 x 380 - 460

3 x Vin

18,5

IPFC 348

3 x 380 - 460

3 x Vin

IPFC 365

3 x 380 - 460

3 x Vin

IPFC 375

3 x 380 - 460

3 x Vin

IPFC 385

3 x 380 - 460

3 x Vin

Power frequency: 50 - 60 Hz (+/- 2%)

Max. ambient temperature at nominal current: 40°C (104 °F)

Max. altitude at nominal current: 1000 m

Grade of protection: IP55 (SIZE 1,2) , IP54 (SIZE 3) *

RS485 serial communication

* auxiliary cooling fan of the IPFC, used in wall mounted applications, has a protection rating of IP54.

IPFC is able to power the motor with a higher current for a short period of time according to the linear relation: 101%

of the nominal current for 10min., 110% nominal current for 1 min.

3.1 Weight and dimensions

Model

Weight *

Size

[Kg]

IPFC 109

IPFC 114

4,3

IPFC 306

4,4

IPFC 309

4,4

IPFC 314

IPFC 318

IPFC 325

IPFC 330

7,2

IPFC 338

IPFC 348

IPFC 365

IPFC 375

IPFC 385

* Weight without packing.

SIZE 1

SIZE 2

SIZE 3

4. Electric wiring

Power board IPFC 109,114

Power supply:

LINE: L1, L2,GND

It is recommended to use cable

lugs

Output:

3 ph motor:

GND,U,V,W,

1 ph motor:

earth, U (running), V (common)

It is recommended to use cable

lugs.

230 V AC auxiliary fans (wall

mounting kit)

FAN: F1, F2

Recommended line and motor cables stripping

Power board IPFC 306,309

Power supply:

LINE: GND , L1, L2, L3,

It is recommended to use cable

lugs.

Motor output:

MOTOR: U, V, W, GND

It is recommended to use cable

lugs.

12 V dc auxiliary fan (wall

mounting kit) :

0VE, + VE

WARNING: respect the polarity.

Cable stripping recommended for line input and output to the motor.

Power board IPFC 314,318,325,330

Power supply:

LINE: L1, L2, L3, GND

It is recommended to use cable

lugs.

Motor output:

MOTOR: U, V, W, GND

It is recommended to use cable

lugs.

12 V dc auxiliary fans (wall

mounting kit)

VENT: +, -

WARNING: respect the polarity.

Cable stripping recommended for line input and output to the motor.

Power board IPFC 338,348,365,375,385

Power supply:

LINE: L1, L2, L3, P.E.

It is recommended to use

cable lugs.

Motor output:

MOTOR: U, V, W, P.E.

It is recommended to use

cable lugs.

Cable stripping recommended for line input and output to the motor.

LINE

P.E.

P.E

MOTOR

Control board

Analog inputs (10 or 15 Vdc):

1. AN1: 4-20 mA: sensor 1

2. AN2: 4-20 mA: sensor 2

3. AN3: 4-20 mA / 0 - 10 Vdc (settable

by jumper C.C.): external set

4. AN4: 4-20 mA / 0 - 10 Vdc (settable

by C.C.): trimmer for frequency

regulation / external set 2

Digital outputs:

motor run signal:

NO1, COM1: closed contact with motor running.

NC1,COM1: closed contact with motor stopped.

alarm signal

NO2,COM2: closed contact without alarm.

NC2,COM2: closed contact with alarm or no power

supply.

DOL1 pump relay:

NO3,COM3: closed contact with DOL1 running.

NC3,COM3: opened contact with DOL1 running.

DOL2 pump relay:

NO4,COM4: closed contact with DOL2 running.

NC4,COM4: opened contact with DOL2 running.

Relays are no voltage contacts. Max. voltage to the

contacts is 250 V with max current of 5 A.

RS485 for COMBO:

S1+

S1-

G

It is recommended to

respect the polarity

linking more IPFCs in

series.

Digital inputs:

IN1 : motor start & stop

IN2: value set 1 & 2 switching

IN3: sensor 1 & 2 switching

IN4 : motor start & stop + alarms

reset

0V

We recommend using only no voltage

contacts.

Opening or closing the digital contacts

(depending on software configuration

set (see IN/OUT. parameters) you can

start or stop the motor.

RS485 for MODBUS:

S2+

S2-

G

It is recommended to

respect the polarity.

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Pentax Azionamento CC

Pentax

Pentax DSI-200 Series Manuale utente

Manuali Azionamento CC popolari di altre marche

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manuale utente

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manuale elenco delle parti

Chamberlain Garog

Chamberlain Garog D Series Manuale utente

Parker

Parker PDS Series Manuale utente

Festo

Festo DGC G Series Guida all'installazione

Binks

Binks QS-5012-1-CE Manuale utente

Danfoss

Danfoss VLT 2800 Series Scheda tecnica

ABB

ABB ACQ580-01 Series Manuale di installazione

YASKAWA

YASKAWA CANopen SI-S3 Manuale utente

GE D20A6 Manuale utente

Unex

Unex MC-D-250-1000-050W-TW Manuale utente

Geckodrive

Geckodrive G213V Manuale utente

ABB

ABB RSYC-01 Manuale utente

Rockwell Automation

Rockwell Automation PowerFlex 700S Manuale del proprietario

WEG

WEG DeviceNet CFW500 Manuale utente

Siemens

Siemens SINAMICS G Scheda tecnica

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Istruzioni operative

SOMFY

SOMFY JR RU 30 Manuale utente