peplink Pepwave AP One Series Manuale utente
Pepwave AP One Series:
AP One AC Mini (HW2) / AP One Flex (HW4) / AP One AX
Pepwave AP Firmware 3.7.2
August 2020
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
Table of Contents
Introduction and Scope 4
Product Features and Benefits 5
Package Contents 6
AP One AC mini (APO-AC-MINI) 6
AP One Flex (APO-FLX) 6
AP One AX (APO-AX) 6
Hardware Overview 7
AP One AC mini 7
AP One Flex 8
AP One AX 10
Installation 12
Installation Procedures 12
Dashboard 14
General 15
AP 16
Network 18
WAN 18
LAN 20
Interfaces > Ethernet Port 23
PepVPN 23
AP 26
Wireless SSID 26
Settings 36
WDS 40
System Tab 41
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
Admin Security 41
Firmware 42
Time 43
Event Log 44
SNMP 44
Controller 47
Configuration 48
Feature Add-Ons 50
Reboot 50
Tools > Ping 51
Tools > Traceroute 51
Tools > Nslookup 52
Status 52
Device 53
Client List 54
WDS Info 54
Portal 55
Rogue AP 55
Event Log 56
Restoring Factory Defaults 56
Appendix 57
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
1 Introduction and Scope
Our AP Series of enterprise-grade 802.11ac/a/b/g/n Wi-Fi access points is engineered to
provide fast, dependable, and flexible operation in a variety of environments, all controlled by an
easy-to-use centralized management system.
From the small but powerful AP One AC mini to the top-of-the-line AP Pro Duo our AP Series
offers wireless networking solutions to suit any business need, and every access point is loaded
with essential features such as multiple SSIDs, VLAN, WDS, and Guest Protect.
A single access point provides as many as 32 virtual access points (16 on single-radio models),
each with its own security policy (WPA, WPA2, etc.) and authentication mechanism (802.1x,
open, captive portal, etc.), allowing faster, easier, and more cost-effective network builds.
Each member of the AP Series family also features a high-powered Wi-Fi transmitter that
greatly enhances coverage and performance while reducing equipment costs and maintenance.
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
2 Product Features and Benefits
Key features and benefits of AP Series access points:
● High-powered Wi-Fi transmitter enhances coverage and lowers cost of ownership.
● Independent security policies and encryption mechanisms for each virtual access point
allow fast, flexible, cost-effective network builds.
● Centralized management via InControl reduces maintenance expense and time.
● WDS support allows secure and fast network expansion.
● Guest Protect support guards sensitive business data and subnetworks.
● WMM (Wi-Fi Multimedia) and QoS (Quality of Service) support keeps video and other
bandwidth-intensive data flowing fast and lag-free.
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
3 Package Contents
AP One AC mini (APO-AC-MINI)
1 x AP One mini
1 x 12V2A Power supply
1 x Mounting Bracket
AP One Flex (APO-FLX)
1 x AP One Flex
1 x Cable Tie
* Power supply or Pepwave Passive PoE Injector are not included
AP One AX (APO-AX)
1 x AP One AX
1 x Ceiling Mount
1 x Screw Kit
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
4 Hardware Overview
4.1 AP One AC mini
Front View Rear Panel View
LED Indicators
Status
RED – Access point initializing
GREEN – Access point ready
Wi-Fi
OFF – 2.4/5GHz Wi-Fi radio off
BLINKING – AP sending/receiving data
GREEN – 2.4/5GHz Wi-Fi radio on
Note that this model includes a 2.4GHz Wi-Fi radio and a 5GHz Wi-Fi radio that can
operate simultaneously to increase speed and reduce interference.
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
4.2 AP One Flex
Connector Panel (Inside the Lid)
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
LED Indicators
Status
RED
Access point initializing
Blinking Red
Boot up or error
GREEN
Access point ready
LAN
Green LED
ON – Powered-on device connected to Ethernet port or 1000Mbps
OFF – 10Mbps / 100Mbps or No device connected to Ethernet port
Orange LED
ON – Port is connected without traffic
BLINKING – Ethernet port sending/receiving data
OFF – No data is being transferred or No device connected to Ethernet port
Port Type
Auto MDI/MDI-X ports
WAN
Green LED
ON – Powered-on device connected to Ethernet port or 1000Mbps
OFF – 10Mbps / 100Mbps or No device connected to Ethernet port
Orange LED
ON – Port is connected without traffic
BLINKING – Ethernet port sending/receiving data
OFF – No data is being transferred or No device connected to Ethernet port
Port Type
Auto MDI/MDI-X ports
Green LED
ON – Powered-on device connected to Ethernet port
OFF – No device connected to Ethernet port
Number of connected clients – SignalBar1: WiFi AP client count > 0
SignalBar2: WiFi AP client count > 10
SignalBar3: WiFi AP client count > 20
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
4.3 AP One AX
Front View
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo
are trademarks of Peplink. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
Altri manuali per Pepwave AP One Series
3
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali peplink Punto di accesso wireless
