Pepperl+Fuchs SIL VIM8 Series Manuale utente
Functional Safety
Vibration Sensor VIM8*
Manual
ISO9001
PL d
2
With regard to the supply of products, the current issue of the following document is applicable:
The General Terms of Delivery for Products and Services of the Electrical Industry, published by the Central
Association of the Electrical Industry (Zentralverband Elektrotechnik und Elektroindustrie (ZVEI) e.V.) in its most
recent version as well as the supplementary clause: "Expanded reservation of proprietorship"
Worldwide
Pepperl+Fuchs Group
Lilienthalstr. 200
68307 Mannheim
Germany
Phone: +49 621 776 - 0
E-mail: info@de.pepperl-fuchs.com
North American Headquarters
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, Ohio 44087
USA
Phone: +1 330 425-3555
E-mail: [email protected].com
Asia Headquarters
Pepperl+Fuchs Pte. Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Phone: +65 6779-9091
E-mail: [email protected]
https://www.pepperl-fuchs.com
3
Functional Safety Vibration Sensor VIM8*
Contents
2022-07
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.1 Content of this Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2 Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.3 Symbols Used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.2 Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.3 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.4 Standards and Directives for Functional Safe . . . . . . . . . . . . . . . . . . . . 10
3 Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.1 Assumptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2 Safety Function and Safe State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.3 Characteristic Safety Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.4 Useful Lifetime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4 Mounting, Installation and Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.1 Parameterization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.1 Proof Test and Self-Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6 Maintenance and Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
7 List of Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Functional Safety Vibration Sensor VIM8*
Contents
4
2022-07
Functional Safety Vibration Sensor VIM8*
Introduction
2022-07
5
1 Introduction
1.1 Content of this Document
This document contains information for usage of the device in functional safety-related
applications. You need this information to use your product throughout the applicable stages
of the product life cycle. These can include the following:
•Product identification
•Delivery, transport, and storage
•Mounting and installation
•Commissioning and operation
•Maintenance and repair
•Troubleshooting
•Dismounting
•Disposal
The documentation consists of the following parts:
•Present document
•Instruction manual
•Datasheet
Additionally, the following parts may belong to the documentation, if applicable:
•EU-type examination certificate
•EU declaration of conformity
•Attestation of conformity
•Certificates
•Control drawings
•FMEDA report
•Assessment report
•Additional documents
For more information about Pepperl+Fuchs products with functional safety,
see www.pepperl-fuchs.com/sil.
Note
This document does not substitute the instruction manual.
Note
For full information on the product, refer to the instruction manual and further documentation
on the Internet at www.pepperl-fuchs.com.
Note
For specific device information such as the year of construction, scan the QR code
on the device. As an alternative, enter the serial number in the serial number search
at www.pepperl-fuchs.com.
2022-07
6
Functional Safety Vibration Sensor VIM8*
Introduction
1.2 Safety Information
Target Group, Personnel
Responsibility for planning, assembly, commissioning, operation, maintenance,
and dismounting lies with the plant operator.
Only appropriately trained and qualified personnel may carry out mounting, installation,
commissioning, operation, maintenance, and dismounting of the product. The personnel
must have read and understood the instruction manual and the further documentation.
Intended Use
The device is only approved for appropriate and intended use. Ignoring these instructions
will void any warranty and absolve the manufacturer from any liability.
The device is developed, manufactured and tested according to the relevant safety standards.
Use the device only
•for the application described
•with specified environmental conditions
•with devices that are suitable for this safety application
Improper Use
Protection of the personnel and the plant is not ensured if the device is not used according
to its intended use.
Functional Safety Vibration Sensor VIM8*
Introduction
2022-07
7
1.3 Symbols Used
This document contains symbols for the identification of warning messages and of informative
messages.
Warning Messages
You will find warning messages, whenever dangers may arise from your actions.
It is mandatory that you observe these warning messages for your personal safety
and in order to avoid property damage.
Depending on the risk level, the warning messages are displayed in descending order
as follows:
Informative Symbols
Action
This symbol indicates a paragraph with instructions. You are prompted to perform an action
or a sequence of actions.
Danger!
This symbol indicates an imminent danger.
Non-observance will result in personal injury or death.
Warning!
This symbol indicates a possible fault or danger.
Non-observance may cause personal injury or serious property damage.
Caution!
This symbol indicates a possible fault.
Non-observance could interrupt the device and any connected systems and plants,
or result in their complete failure.
Note
This symbol brings important information to your attention.
2022-07
8
Functional Safety Vibration Sensor VIM8*
Product Description
2 Product Description
2.1 Function
The following vibration sensor versions are described in this manual:
General
The vibration sensor is used to measure and monitor absolute bearing vibrations in machines
in line with DIN ISO 10816. The effective vibration acceleration value is used
as the measurement parameter.
The vibration sensor determines the vibration variable using rms (root meas square)
averaging. This form of quadratic averaging or pre-filtering enables precise trend statements
about the condition of the application.
The device has 2 switching thresholds LIM1 and LIM2 and the corresponding delay times,
which can be adjusted separately.
The device also has an analog current output. This current output supplies a direct current
of 4 mA to 20 mA proportional to the vibration variable.
Some device versions have an analog current output for the output
of the bearing status parameter, see table above. This output is not safety relevant.
Device version Vibration variable Bearing status
parameter
Pre-alarm and
main alarm
Window
function
VIM8***-**B**-***-******* Vibration acceleration X – X
VIM8***-**C**-***-******* Vibration speed X X –
VIM8***-**G**-***-******* Vibration acceleration – – X
VIM8***-**V**-***-******* Vibration speed – X –
Table 2.1 Device versions
Functional Safety Vibration Sensor VIM8*
Product Description
2022-07
9
Device with Pre-Alarm and Main Alarm
The device evaluates the vibration amplitude in two independent channels.
If the vibration variable is exceeded, this is signaled at the switching contacts.
The switching contacts can be used to generate a pre-alarm and a main alarm.
Figure 2.1 Vibration sensor with pre-alarm and main alarm
Device with Window Function
The lower switching threshold of the window area is adjusted on LIM1 and the upper switching
threshold is adjusted on LIM2. If the acceleration value is below or above the adjustable
window area, an alarm will be triggered.
Figure 2.2 Vibration sensor with window function
R1 Relay contact output R1
R2 Relay contact output R2
SP1 Switching threshold LIM1
SP2 Switching threshold LIM2
WCritical state = pre-alarm from SP1/main alarm from SP2 = relay open =
like de-energized state
R1 Relay contact output R1
R2 Relay contact output R2
SP1 Switching threshold LIM1
SP2 Switching threshold LIM2
WWindow area
Critical state = out of window (SP1, SP2) = relay is open = like de-energized state
SP1
R1
R2
SP2
SP1
R1
R2
SP2
W
Note
See corresponding datasheets for further information.
2022-07
10
Functional Safety Vibration Sensor VIM8*
Product Description
2.2 Interfaces
The device has the following interfaces.
Device with Pre-Alarm and Main Alarm
•Safety relevant interfaces:
•Pre-alarm relay (output 1)
•Main alarm relay (output 2)
•Analog current output for the output of the vibration variable (output 3)
•Non-safety relevant interfaces: analog current output for the output of the bearing status
parameter (output 4, only for VIM8***-**C**-***-******* device version)
Device with Window Function
•Safety relevant interfaces:
•Relay for lower switching threshold (output 1)
•Relay for upper switching threshold (output 2)
•Analog current output for the output of the vibration variable (output 3)
•Non-safety relevant interfaces: analog current output for the output of the bearing status
parameter (output 4, only for VIM8***-**B**-***-******* device version)
2.3 Marking
The *-marked letters of the type code are placeholders for versions of the device.
2.4 Standards and Directives for Functional Safe
Device-specific standards and directives
Note
For corresponding connections see datasheet.
Pepperl+Fuchs Group
Lilienthalstraße 200, 68307 Mannheim, Germany
Internet: www.pepperl-fuchs.com
VIM8***-**B**-***-*******, VIM8***-**C**-***-*******
VIM8***-**G**-***-*******, VIM8***-**V**-***-******* Up to SIL 2 and PL d
Functional safety IEC/EN 61508, part 1 –2, edition 2010:
Functional safety of electrical/electronic/programmable electronic
safety-related systems (manufacturer)
Machinery Directive
2006/42/EC EN/ISO 13849, part 1, edition 2015:
Safety-related parts of control systems (manufacturer)
Indice
Altri manuali Pepperl+Fuchs Accessori
Pepperl+Fuchs
Pepperl+Fuchs UC6000-30GM70-2E2R2-V15 Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs NCN40-L2-N0-V1 Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs LVL-Z121 Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs UDCM-30GS Series Manuale di installazione e funzionamento
Pepperl+Fuchs
Pepperl+Fuchs PHA-F200-B6-V15B Series Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs ML7-55 Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs VDM18-300/32/105/122 Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs RMS-G-RC Guida di riferimento
Pepperl+Fuchs
Pepperl+Fuchs UC F77 Series Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs NJ4-12GM-N-5M Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs KVF-F Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs LGM Series Guida di riferimento
Pepperl+Fuchs
Pepperl+Fuchs RLK28-55-LAS-Z/31/116 Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs NJ1,5-6,5-15-N-Y180094 Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs LUC-M10 Istruzioni per l'installazione
Pepperl+Fuchs
Pepperl+Fuchs UC2000-L2-E4-V15 Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs UC500-L2-E6-V15 Istruzioni operative
Pepperl+Fuchs
Pepperl+Fuchs UC2000-L2-E6-V15-Y277310 Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs INX DH-F199-B30 Series Manuale utente
Pepperl+Fuchs
Pepperl+Fuchs UC6000-30GM-2EP-IO-V15 Manuale utente
