In the Tools page, click Install next to Media Tool and conrm. The Media Tool is now active on your account.
Turning on your camera
All of your PerdixPro cameras are listed in the Inventory section of your account. Before turning on your
camera, you must select a subscription plan by clicking on the Select Plan link in the subscription column.
Choose the appropriate plan for your project. If you are using a pre-pay account, payment for the plan via
debit or credit card must be made before the camera can be activated.
PAGE
2
BOLYGUARD
BG710/BG310
QUICK
START
GUIDE
To setup your camera
1. Attach the aerial to the brass connector on top of the camera.
2. Install 2 x 18650 Lithium batteries. If the camera is new, the batteries will be charged and pre-installed.
3. Insert a new or formatted micro SD card (up to 32GB capacity) into the SD slot just inside the battery
compartment. Again, if the camera is new, this will have been pre-installed.
4. Turn the camera on by pressing the power button for a few seconds. Wait for the camera to connect to
a network. This may take a few minutes.
5. Once connected to a network you can push the MENU button to access the main menu to change the
camera’s settings as required. Please see the instructions for the BG310 or BG710 for further details.
Press the MENU button to return to the live screen.
6. The camera can now be activated by pressing the V button until the screen shows Camera activating.
7. The camera will begin taking images once the LED stops ashing.
