PerkinElmer Lambda 365 Manuale utente

09931256D

PerkinElmer, 710 Bridgeport Avenue,

Shelton, CT 06484-4794, U.S.A

Produced in the USA.

Lambda 365 Microcell Holder

Installation Instructions

This instruction sheet describes the installation of this accessory which is used with the Lambda 365

Spectrophotometer.

NOTE:

Read these instructions before you install this accessory.

Contacting PerkinElmer

Supplies, replacement parts, and accessories can be ordered directly from PerkinElmer, using the part

numbers.

See our website:

http://perkinelmer.com

PerkinElmer's catalog service offers a full selection of high-quality supplies.

To place an order for supplies and many replacement parts, request a free catalog, or ask for information:

If you are located within the U.S., call toll free 1-800-762-4000, 8 a.m. to 8 p.m. EST. Your order will be

shipped promptly, usually within 24 hours.

If you are located outside of the U.S., call your local PerkinElmer sales or service office.

Features

•Suitable size for micro cells

•Excellent durability

•Adjustable cell holder position

Figure 1 Lambda 365 Micro Cell Holder [P/N: N4101028]

09931256D

Dimensions and Specifications

Type Specification

Outline

Height (mm) 86.5

Width (mm) 120

Depth (mm) 170

Weight (kg) 0.56

Description

Connectable Cells

Other Cells are available upon request if what you want is not listed.

Configuration of Micro Cell Holder

Figure 2 Lambda 365 Micro Cell Holder Configuration

Figure 3 Knob

Description

Micro cell, 10 mm light path, Quartz, 1400 ㎕, ea

Micro cell, 10 mm light path, Quartz, 700 ㎕, ea

Micro cell, 10 mm light path, Quartz, 50㎕, ea

Right-to-left

adjustment knob

Top-to-bottom

adjustment knob

09931256D

Installation

1. Loosen a knob to take apart the existing cell holder.

Figure 4 Loosening a knob

2. Pull out the existing cell holder by hand.

Figure 5 Pulling out the cell holder

3. Insert the micro cell holder in the sample compartment and tighten the knob.

Figure 6 Inserting the Micro Cell Holder

09931256D

4. Insert the micro cells into the cell holder.

Figure 7 Inserting the micro cells into the cell holder

How to adjust the Microcell holder so that the beam passes

through the micro cell window

1. Run Scan mode and select Method. Select SBW 20.

2. Select Measure in main menu and select Go to Wavelength and then check Zero Order.

3. Input the micro cells into each reference and sample holder.

Reference

Sample

09931256D

4. Attach the white paper (ex. post-it note) on the right side wall of the sample compartment for

checking the light passes through the window of the micro cell. In order to adjust the right-and -

left position of the micro cell holder, loosen the two hand bolts on the plate of the microcell

holder.

5. Adjust the position by moving the micro cell holder back and forth slowly so that the large

portion of light passes through the window of the micro cell. After the position adjustment is

completed, tighten the hand bolt on the bottom plate of the microcell holder.

09931256D

6. In order to adjust the height of the micro cell holder, loosen the knob on the side of the

microcell holder.

7. Adjust the height by moving the micro cell holder up and down slowly so that the large portion

of light passes through the window of the micro cell. After the height adjustment is completed,

tighten the knob on the side of the micro cell holder.

NOTE:

It is required to adjust the left-and-right and height positions of both the sample and reference

cell holder.

Altri manuali per Lambda 365

Indice

Altri manuali PerkinElmer Attrezzature da laboratorio

PerkinElmer

PerkinElmer aanalyst 200 Manuale utente

PerkinElmer

PerkinElmer TriNEST Manuale utente

PerkinElmer

PerkinElmer RamanMicro 200 Series Manuale utente

PerkinElmer

PerkinElmer IVIS Lumina S5 Manuale utente

PerkinElmer

PerkinElmer HATR Manuale utente

PerkinElmer

PerkinElmer Spectrum RX I Manuale utente

PerkinElmer

PerkinElmer TITAN MPS Manuale utente

PerkinElmer

PerkinElmer Lambda 365 Manuale utente

PerkinElmer

PerkinElmer RamanStation 400 Series Manuale utente

PerkinElmer

PerkinElmer Spectrum Two HATR Manuale utente

PerkinElmer

PerkinElmer LAMBDA 265 Manuale utente

PerkinElmer

PerkinElmer OMNI Bead Ruptor Elite Manuale utente

PerkinElmer

PerkinElmer CLARUS 600 GC Manuale utente

PerkinElmer

PerkinElmer Clarus 600/560 D MS Istruzioni per l'installazione

PerkinElmer

PerkinElmer VesselVue Manuale utente

PerkinElmer

PerkinElmer clarus 500 gc Manuale utente

PerkinElmer

PerkinElmer CLARUS 590 GC Manuale utente

PerkinElmer

PerkinElmer Lambda 465 Manuale utente

PerkinElmer

PerkinElmer OPERETTA Manuale utente

PerkinElmer

PerkinElmer Raman IdentiCheck Manuale utente

PerkinElmer

PerkinElmer Frontier Optica FT-IR Manuale utente

PerkinElmer

PerkinElmer Wallac 1420 Manuale utente

PerkinElmer

PerkinElmer OMNI Prep Manuale utente

PerkinElmer

PerkinElmer PINAACLE 900 Series Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente