PerkinElmer Lambda 365 Manuale utente

09931258D

PerkinElmer, 710 Bridgeport Avenue,

Shelton, CT 06484-4794, U.S.A

Produced in the USA.

Lambda 365 Test Tube Holder

Installation Instructions

This instruction sheet describes the installation of this accessory which is used with the Lambda 365

Spectrophotometer.

NOTE:

Read these instructions before you install this accessory.

Contacting PerkinElmer

Supplies, replacement parts, and accessories can be ordered directly from PerkinElmer, using the part

numbers.

See our website:

http://perkinelmer.com

PerkinElmer's catalog service offers a full selection of high-quality supplies.

To place an order for supplies and many replacement parts, request a free catalog, or ask for information:

If you are located within the U.S., call toll free 1-800-762-4000, 8 a.m. to 8 p.m. EST. Your order will be

shipped promptly, usually within 24 hours.

If you are located outside of the U.S., call your local PerkinElmer sales or service office.

Features

• Available with various tube cells

• Excellent durability

Figure 1 Lambda 365 Test Tube Holder [P/N: N4101018]

09931258D

2

Dimensions and Specifications

Type Specification

Dimension (mm) 120 (W) x 87 (H) x 170 (D)

Weight (kg) 0.9

Sample Size (mm) Max. Height : 130

Min~Max. Diameter: 10~20

Configuration of the Test Tube Holder

Figure 2 Lambda 365 Test Tube Holder Configuration

Figure 3 Height adjustment plate (2 ea) and Phillips round head screw with washer

(M3x8L, 4 ea)

Figure 4 Knob

09931258D

3

Installation

1. Loosen the knob to take apart the existing cell holder.

Figure 5 Loosening the knob

2. Pull out the cell holder by hand.

Figure 6 Pulling out the cell holder

3. Insert the test tube holder in the sample compartment and tighten the knob.

Figure 7 Inserting the test tube holder

09931258D

4

4. Turn on the power switch which is located on the rear of the instrument.

5. Insert the tube in the test tube holder.

Figure 8 Inserting the test tube holder

09931258D

5

Sampling

When the tube height is less than 105 mm

1. Insert the tube in the test tube holder.

Figure 9 Inserting the test tube

When the tube height is more than 105 mm

NOTE:

Available tube height up to 130 mm.

1. To control the height adjustment plate, loosen the four screws by using a Phillips screwdriver.

Figure 10 Controlling the height adjustment plate

2. Insert the tube and set the appropriate location of the height adjustment plate so that the

inserted tube does not block the sample compartment lid from closing.

NOTE:

If the tube height is more than 120 mm, it is recommended to remove the height adjustment plate.

3. After setting the height, tighten the Phillips round head screws with washer.

09931258D

6

Altri manuali per Lambda 365

6

Indice

Altri manuali PerkinElmer Attrezzature da laboratorio

PerkinElmer

PerkinElmer chemagic 360-D Manuale utente

PerkinElmer

PerkinElmer RamanStation 400 Series Manuale utente

PerkinElmer

PerkinElmer AVIO 200 Istruzioni per l'installazione

PerkinElmer

PerkinElmer IVIS Lumina S5 Manuale utente

PerkinElmer

PerkinElmer HATR Manuale utente

PerkinElmer

PerkinElmer Lambda 650 Istruzioni per l'installazione

PerkinElmer

PerkinElmer Lambda 365 Manuale utente

PerkinElmer

PerkinElmer CLARUS 680 GC Manuale utente

PerkinElmer

PerkinElmer Frontier Optica FT-IR Manuale utente

PerkinElmer

PerkinElmer OPTIMA 8000 Manuale utente

PerkinElmer

PerkinElmer PINAACLE 900 Series Manuale utente

PerkinElmer

PerkinElmer AVIO 500 Manuale utente

PerkinElmer

PerkinElmer RamanMicro 200 Series Manuale utente

PerkinElmer

PerkinElmer Lambda 365 Manuale utente

PerkinElmer

PerkinElmer clarus 500 gc Manuale utente

PerkinElmer

PerkinElmer OMNI International Bead Ruptor 96 Manuale utente

PerkinElmer

PerkinElmer Panthera-Puncher 9 Manuale utente

PerkinElmer

PerkinElmer FT-IR Manuale utente

PerkinElmer

PerkinElmer OMNI Bead Ruptor Elite Manuale utente

PerkinElmer

PerkinElmer CLARUS 590 GC Manuale utente

PerkinElmer

PerkinElmer QuickSTAR Horizon Manuale utente

PerkinElmer

PerkinElmer Clarus 600/560 D MS Istruzioni per l'installazione

PerkinElmer

PerkinElmer Clarus SQ 8 MS Series Istruzioni per l'installazione

PerkinElmer

PerkinElmer FL 6500 Manuale utente

Manuali Attrezzature da laboratorio popolari di altre marche

Qiagen

Qiagen DML 3000 Manuale utente

Queensgate

Queensgate NANOSCAN OP400 Manuale di programmazione

Conviron

Conviron GEN1000-GE Manuale utente

Parr Instrument

Parr Instrument 4560 Manuale di istruzioni

IKA

IKA IC control Manuale utente

Integra

Integra DOSE IT Manuale utente

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuale utente

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuale utente

NI

NI PXI-5422 Manuale

Collomix

Collomix Aqix Manuale utente

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuale utente

Ocean Insight

Ocean Insight FLAME-NIR+ Manuale utente

Parker

Parker ALIGN-MG-NA Manuale utente

BD

BD 644787 Manuale utente

DENTAURUM

DENTAURUM Compact Megaplus Manuale utente

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuale utente

VWR

VWR SAS Super IAQ Manuale utente

illumina

illumina MiSeqDx Manuale utente