Perle IOLAN SCG Series Manuale
IOLAN SCG Hardware Installation Guide
Updated: Oct 29, 2018
Version A.10.29.2018
Document Part#:5500438-10
www.perle.com
2
IOLAN SCG Hardware Installation Guide
Preface
Preface
Audience
This guide is for the network or computer technician responsible for installing the Perle IOLAN SCG
also referred to as the IOLAN within this document.
Familiarity with the concepts and terminology of Ethernet and local area networks is required.
Purpose
This document describes the hardware and physical characteristics of the Perle IOLAN. It
covers hardware features as well as installation and operation of the IOLAN. This document does not
cover how to configure your Perle IOLAN. Information to configure your Perle IOLAN can be found
in the IOLAN User’s Guide V5.0 and greater, the IOLAN SCG Quick Start Guide on the Perle web-
site.
Chapter Overviews
Main Topics Description
IOLAN SCG Components Components of your IOLAN.
Reset Function How to reset the IOLAN to custom or factory defaults.
Configuring the IOLAN SCG Methods to configure the software features for the IOLAN.
Appendix A - Technical
Specifications
Overall technical specifications including input power and
environmental specifications.
Appendix B - Label (sample) Product label.
Appendix C - Cabling and
Pinouts
Cables and connectors used with the IOLAN.
Appendix D - Maintaining your
IOLAN
Maintenance of your IOLAN.
Appendix E - Mechanical Mechanical drawings showing product dimensions.
3
IOLAN SCG Hardware Installation Guide
Preface
Additional Documentation
Document Conventions
This document contains the following conventions:
Most text is presented in the typeface used in this paragraph. Other typefaces are used to help you
identify certain types of information. The other typefaces are:
Note: Means reader take note: notes contain helpful suggestions.
Caution: Means reader be careful. In this situation, you might perform an action that could result in
equipment damage or loss of data.
Warning: IMPORTANT SAFETY INSTRUCTIONS
Means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be
aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing
accidents.
Cautions and Warnings
Warning: Power sources must be off prior to beginning the power connection steps. Read the installation
instructions before you connect the unit to its power source.
Warning: Ensure that the voltage and current ratings of the intended power source are appropriate for the
SCG as indicated on the product label.
Warning: Ensure that the installation and electrical wiring of the equipment is performed by trained and
qualified personnel and that the installation complies with all local and national electrical codes.
Warning: The working voltage inputs are designed for operation with Safety extra low Voltage (SELV).
Connect only to SELV circuits with voltage restrictions in line with IEC/EN 62368-1.
Warning: This equipment must be used in the matter specified by the manufacturer.
Warning: In case of malfunction or damage, no attempts at repair should be made by the user. Do not
dismantle this product.
Document Description
IOLAN User’s Guide V5.0 and
greater
User guide explaining how to configure the IOLAN
features using the WebManager or DeviceManager
applications. New users should use these methods to
configure the IOLAN SCG.
IOLAN CLI (Command Line
Interface) Reference Guide V5.0
and greater
Command Line Interface Reference Guide using CLI
commands to configure the IOLAN (this is an advanced
way to configure the IOLAN).
4
IOLAN SCG Hardware Installation Guide
Preface
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE
SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND
RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio-frequency energy and, if not installed and used in accordance with this hardware guide
may cause harmful interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case users will be required to correct the interference at their own
expense.
Modifications to this product not authorized by Perle could void the FCC approval and negate your authority to
operate the product.
Perle reserves the right to make changes without further notice, to any products to improve reliability, function,
or design.
Perle, the Perle logo, and IOLAN SCG Serial Device Servers (SDS) are trademarks of Perle Systems Limited.
Copyright
©2018 Perle Systems Limited.
60 Renfrew Drive
Markham, Ontario
L3R 0E1 Canada
All rights reserved. No part of this document may be reproduced or used in any form without written permission
from Perle Systems.
5
IOLAN SCG Hardware Installation Guide
Publishing History
Publishing History
Date Revision Update Details
June 2018 A.06.21.2018 Initial release of the IOLAN SCG series.
October 2018 A.10.29.2018 Added pinout diagrams for serial ports.
6
IOLAN SCG Hardware User’s Guide
Table of Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Publishing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
IOLAN SCG Models ................................................................................... 7
What’s Included .......................................................................................... 7
What You Need to Supply .......................................................................... 7
IOLAN SCG Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
IOLAN SCG Front View.............................................................................. 8
IOLAN SCG Back View .............................................................................. 8
Ethernet LAN Port ...................................................................................... 8
Power Switch.............................................................................................. 9
Console Admin Ports.................................................................................. 9
Reset Function ......................................................................................... 11
Resetting the IOLAN SCG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Configuring the IOLAN SCG . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DeviceManager ........................................................................................ 12
WebManager ............................................................................................ 12
CLI ............................................................................................................ 12
SNMP ....................................................................................................... 12
Appendix A - Technical Specifications . . . . . . . . . . . . . . . . . . . 13
Appendix B - Label (sample). . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Appendix C - Cabling and Pinouts . . . . . . . . . . . . . . . . . . . . . . . 15
Appendix D - Maintaining your IOLAN. . . . . . . . . . . . . . . . . . . . 20
Appendix E - Mechanical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
7
IOLAN SCG Hardware Installation Guide
Overview
Overview
For infrastructure management, the Perle's IOLAN SCG Series will provide the most versatile access
to your IT equipment's serial consoles whether in a large scale data center or remote branch. The
IOLAN SCG Series is the next edition in our highly successful line of serial console servers. The
IOLAN SCG gives you a way to access serial devices remotely from anywhere there is a network
connection.
IOLAN SCG Models
The SCG model can be ordered with:
16/32/48 RS232 RJ45 ports
1 auto-sensing Ethernet port (RJ45 10/100/1000 Mbps).
1 Micro-USB and 1 RS232 RJ45 Console Admin Port
What’s Included
The following components are included with your product:
IOLAN SCG Chassis: 1U-tall (1.75 inch), rack-mountable chassis
installed 16 RS232 RJ45 ports or
installed 32 RS 232 RJ45 ports or
installed 48 RS 232 RJ45 ports
Power cable
Quick Start Guide
Rack mount kit
1 meter CAT5 straight-through patch cable
Adapter to convert from Cisco (RJ45) pin-out to DB9F
What You Need to Supply
Before you can begin, you need to have the following:
A serial cable(s) to connect serial devices to your IOLAN unit.
An Ethernet CAT5e 10/100/1000BASE-T cable/to connect the IOLAN unit to the
network
8
IOLAN SCG Hardware Installation Guide
IOLAN SCG Components
IOLAN SCG Components
IOLAN SCG Front View
IOLAN SCG Back View
Ethernet LAN Port
The Ethernet RS232 RJ45 port provides the standard Ethernet interface speeds of 10/100/1000 Mbps
through twisted pair (UTP) cables of up to 100 meters (328ft) in length.
Once the IOLAN has connected and the link is established, the speed LED will turn on. The LED will
indicate whether you have a 10, 100 or 1000 Mbps link on the Ethernet port.
Ethernet LAN RJ45 10/100/1000
Connect a LAN cable to the Ethernet port on the back of the IOLAN. Cat5e cables are recommended
for 1000 Mbps connections.
Speed Indicator
Activity Indicator
9
IOLAN SCG Hardware Installation Guide
IOLAN SCG Components
Ethernet Link Status
Power Switch
The IOLAN has one power connector located on the back of the IOLAN. The power switch should be
in the off position when connecting the power cord.
Console Admin Ports
The IOLAN has one RJ45 console port (8 pin connector with DTE pinouts) on the front for use with
PC’s equipped with a serial com port. Additionally, the IOLAN has one
Micro-USB console port which uses a standard Micro-B USB connector.
RJ45 Console Port
To connect to the RJ45 console port:
1. Connect the power, then set the power switch on the back of the IOLAN to the On position.
2. Allow the IOLAN to complete the boot up sequence.
3. Connect an RJ45 cable directly from the IOLAN to the COM port on your PC using the RJ45-
DB9 adapter that was shipped with your IOLAN.
Speed Indicator Activity Indicator Description
Green Flashes with activity 1000 Mbps
Orange Flashes with activity 10 /100 Mbps
Off N/A No LAN connection
Warning: Before servicing this product ensure the power source has been disconnected.
10
IOLAN SCG Hardware Installation Guide
IOLAN SCG Components
4. On the PC, select Choose Start-> Control Panel-> Hardware and Sound or equivalent on the
Windows Operating System you are using. The exact procedure may vary depending on the ver-
sion of Windows you are using.
5. Click the Hardware tab and choose Device Manager, Expand the Ports (COM & LPT) section.
This will expand the drop down to show the number of com ports on your system. Connect the
cable to one of these ports (probably COM1 or COM2).
6. Start a terminal emulation program (such as Putty or SecureCRT) on the COM port where you
have connected the cable to the PC.
7. Configure this COM port within the terminal emulation program with the following parameters:
• 9600 baud
• 8 data bits
• 1 stop bit
•No parity
• None (flow control)
8. Press the Enter key on the keyboard and the login prompt will display.
9. The login is admin and password is superuser.
See Appendix C - Cabling and Pinouts for cabling information.
See the IOLAN CLI Reference Guide V5.0 and greater for more information on using the CLI
commands.
Micro-USB Console Port
To connect to the Micro-USB Console port:
1. Connect the power, then set the power switch on the back of the IOLAN to the On position.
2. Allow the IOLAN to complete the boot up sequence.
3. Connect a USB cable to the PC’s USB port, then connect the other end of the cable to the IOLAN
Micro-B USB connector.
4. On the PC Choose Start -> Control Panel -> Hardware and Sound (or equivalent) on the Windows
Operating System. Choose the Device Manager, and expand the Ports section. The assigned COM
port can be identified.
5. Start a terminal emulation program (such as Putty or SecureCRT) on the com port where you have
connect the cable to the PC.
6. Configure your COM port within the emulation program on the PC as:
• 9600 baud
• 8 data bits
• 1 stop bit
•No parity
• None (flow control)
7. Press the Enter key on the keyboard and the login prompt will display.
8. The Login is admin and password is superuser.
See the IOLAN Command Line Interface Reference Guide V5.0 and greater for more information on
using the CLI commands.
Altri manuali per IOLAN SCG Series
1
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Perle Hardware di rete
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
