Perle IDS-108FPP series Manuale utente

Questo manuale è adatto per i seguenti modelli

2

Indice

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente

Perle IDS-108FPP (XT)

Unmanaged 10/100 PoE/PoE+

Ethernet Switches with Fiber Ports

P/N 5500341-10 (Rev I)

Installation Guide

IDS-108FPP Installation Guide

2

Overview

This document contains instructions necessary for the

installation and operation of the Perle IDS-108FPP

unmanaged Ethernet switch. This Ethernet switch is a

8-port RJ-45 switch with PoE/PoE+ capabilities on

ports one through four. The PoE/PoE+ Ethernet ports

function as (PSE) Power Sourcing Equipment and can

each independently power a PD (Powered Device)

using standard UTP cables that carry Ethernet data.

Powered Devices must comply with the IEEE 802.3af

or the 802at-2009 standard for PoE or PoE+ devices.

The IDS-108FPP is available in various copper and

fiber configurations (see table below). The fiber ports

can be either single mode (SM) or multimode (MM)

depending on the model selected and can operate over

different wavelengths and distances. Visit the Perle

website for the most up to date installation guides,

models and specifications.

http://www.perle.com/

Note: xxxxxxxx(XT) indicates models numbers for this

product line.

TP = twisted pair

XT = Industrial Temperature models

Model Port 1-4 Port 5 - 8 Port 9 and 10

IDS-108FPP TP (RJ-45)

PoE/PoE+

TP (RJ-45) empty

IDS-108FPP-xxxxxxxx TP (RJ-45)

PoE/PoE+

TP (RJ-45) 1 or 2 fiber ports

(SC or ST)

IDS-108FPP-XT

(Industrial Temperature

Model)

TP (RJ-45)

PoE/ PoE+

TP (RJ-45) empty

IDS-108FPP-xxxxxxxx-XT

(Industrial Temperature

Model)

TP (RJ-45)

PoE/PoE+

TP (RJ-45) 1 or 2 fiber ports

(SC or ST)

IDS-108FPP Installation Guide

3

Features

•8 port 10/100Base-TX (RJ-45), with 1 or 2 fiber

ports (SC/ST), multi/single mode

•4 PoE/PoE+ PSE capable ports, fully compliant to

IEEE 802.3af/at

•Redundant DC power inputs 18-57 VDC

•Rugged, high strength IP30 aluminum case

•Industrial temperature models

•Din-rail or wall/panel mounting

Note – In this guide the various models will be referred to as

the IDS-108FPP

Getting to know your IDS-108FPP

Switch

Package Contents:

•IDS-108FPP

•DIN-rail mounting clip (pre-installed on the unit)

•This guide

Note – optional panel/wall mounting kits may be ordered for

the IDS-108FPP switch

IDS-108FPP Installation Guide

4

Front View of IDS-108FPP (8 port RJ-45)

IDS-108FPP Installation Guide

5

Front View of IDS-108FPP (

with one or two

fiber ports)

IDS-108FPP Installation Guide

6

Bottom view of the IDS-108FPP (with two ST

fiber ports installed)

Top view of the IDS-108FPP

The IDS-108FPP switch has two power inputs that can

be connected simultaneously. If one power source fails,

the other source acts as a backup, and automatically

powers the switch.

IDS-108FPP Installation Guide

7

Status LED

(with two fiber ports)

P1 / P2– Power (Green LED)

•On: Power present

•Off: No Power present

9 / 10 (Port 9 / 10 – Fiber) (Green LED)

•On: Link up

•Flashing: Link up and Ethernet activity detected

•Off: Link down

Ethernet Port Status

Port Link / Speed (Green and Yellow LEDs)

Port Link (Green LED)

•On: Link up

•Flashing: Link up and Ethernet activity detected

Port Speed (Yellow LED)

•On: communicating at 100 Mbps

•Off: communicating at 10 Mbps

IDS-108FPP Installation Guide

8

Views for the IDS-108FPP

IDS-108FPP Installation Guide

9

IDS-108FPP Installation Guide

10

Mounting the IDS-108FPP on a DIN-rail

1. The DIN-rail clip will be fixed to the back panel of

the IDS-108FPP switch when you receive the

product.

2. Position the IDS-108FPP such that the top of the

DIN rail fits into the slot on the top of the DIN-rail

clip, just below the DIN-rail hook and behind the

spring.

3. While pushing down on the unit to compress the

spring, rotate the bottom of the IDS-108FPP toward

the rail. This will snap the bottom of the rail into the

bottom of the clip. See diagram below.

Note: To remove the IDS-108FPP from the DIN-rail,

push down slightly on the IDS-108FPP unit while

pulling the bottom out.