© 2022 | perma-tec GmbH& Co. KG | www.perma-tec.com | 5
• Keep connection lines as short as possible and use tubes / hoses with an inside diameter of at least 6 mm.
Keep in mind that tube / hose length and bore diameter of bearing housings affect pressure and discharge period
of the lubrication system.
• For installation of perma NOVA use Mounting bracket 1-point G1/4 female (109685).
• Secure tubes / hoses with suitable fastenings (brackets, cable ties) to protect against damage and tearing.
• Depending on lubricant and ambient temperature, different tube / hose lengths are possible, e. g.
→perma Multipurpose grease SF01: 2 m (+20 °C)
→perma Multipurpose oil SO32: 3 m (+20 °C).
Mounting bracket 1-point G1/4 female (109685)
Hose connector G1/4 male for hose iØ 9.5 mm - push-lock (116624)
Heavy Duty hose up to +100 °C oØ 16 mm x iØ 9.5 mm (101555)
Hose connector G1/4 male for hose iØ 9.5 mm - push-lock (116624)
Reducer for thread connection
Remote mounting is recommended if,
• the ambient temperature of the lubrication point is permanently higher than +60 °C
• the lubrication point is exposed to high vibrations
• no direct access to lubrication point is possible due to safety issues
(e. g. removal of protective screens, safety walls or cages)
• it is difcult or dangerous to access the lubrication point
• the lubrication system is exposed to mechanical forces (e. g. falling rocks)
Remote mounting with tube / hose
All metal to metal connections must
be glued together with Loctite® 243™
