Philips HP6453/01 Manuale utente
ENGLISH 6
DEUTSCH 17
FRANÇAIS 29
NEDERLANDS 40
ESPAÑOL 52
ITALIANO 64
PORTUGUÊS 76
88
TÜRKÇE 101
HP6459, HP6457, HP6455, HP6453
5
Introduction
◗With your new Satinxice optima you can
remove unwanted hairs quickly, easily and
effectively.The combination of the proven
epilating disc system with the newly
developed skin cooler constitutes a revolution
in epilation.Thanks to the natural numbing
effect of ice on the skin, the new Satinxice
optima makes epilation more comfortable and
less painful than ever.The result is a silky-
smooth skin and a reduced hairgrowth up to
50 percent assuming you use it regularly every
4 weeks.
◗The Satinxice optima is particularly suitable
for the legs.Type HP6459 and HP6457 also
comes with a skin cooler that has been
specially developed for epilating sensitive
areas (underarms, bikini line).These areas are
particularly sensitive to pain, which this special
skin cooler helps to diminish.
◗The rapidly rotating epilating discs catch even
the shortest hairs (0.5 millimetres!) and pull
them out by the roots.As a result, your skin
stays smooth for up to four weeks and
regrowth is soft and downy.
Important
◗Check if the mains voltage indicated on the
adapter plug corresponds to the local mains
voltage before you connect the appliance.
◗Only use the appliance in combination with
the adapter plug supplied.
ENGLISH6
◗Make sure the appliance and the adapter plug
do not come into contact with water.
◗Keep the appliance out of the reach of
children.
◗To prevent damage and injuries, keep the
running appliance away from your hair,
eyebrows, eyelashes, clothes, threads, cords,
brushes etc.
◗If the adapter plug of this appliance is
damaged, it may only be replaced with an
adapter plug of the original type.Turn to your
Philips dealer or the Philips organisation in
your country for replacement.
◗Do not expose the appliance to temperatures
lower than 5cC or higher than 35cC.
◗Do not use the appliance on irritated skin or
skin with varicose veins, rashes, spots, moles
(with hairs) or wounds without consulting
your doctor first. People with a reduced
immune response, e.g. during pregnancy, or
people suffering from diabetes mellitus,
Raynaud's disease or immunodeficiency
should contact their doctor first.
General information about epilation
- Epilation can lead to ingrown hairs or minor
skin injuries, which may cause inflammations
due to penetration of bacteria into the skin. It is
therefore important to clean the epilating head
very carefully before each use.
- Epilation is easier just after taking a bath or
shower. Make sure your skin is completely dry
when you start epilating.
ENGLISH 7
- When you epilate for the first time, we advise
you to try the appliance out on an area with
only light hair growth to get accustomed to the
epilation process.
- After epilation you can apply a mild cream or
body milk to soothe your skin and reduce skin
irritation.
- We advise you to epilate in the evening, as this
will allow any skin irritation that may develop to
disappear overnight.
- Your skin may become a little red and irritated
the first few times you use the epilator.This
phenomenon is absolutely normal and will
quickly disappear.As you use the appliance
more often, your skin will get used to epilation,
skin irritation will decrease and regrowth will
become thinner and softer. If the irritation has
not disappeared within three days, we advise
you to consult a doctor.
- Using the peeling head regularly improves skin
appearance and reduces the risk of ingrown
hairs. Do not use the peeling head immediately
before or after epilation.
General description
AProtective sleeve
BLeg skin cooler
CArmpit skin cooler
DProtective cap epilating head
Eepilating head
FProtective cap peeling head
GPeeling head
ENGLISH8
HProtective cap shaving head
IShaving head
JAppliance
KAdapter plug
Freezing the skin cooler
C1Remove the protective sleeve from the
skin cooler.
C2Put the skin cooler without the protective
sleeve in the freezer cassette and put it in
the freezer or freezing compartment (***)
at least 6 hours before you start epilating.
Make sure the outside of the skin cooler is
completely dry before you freeze it.
◗Tip:You can store the skin cooler in the
freezer permanently.
Epilating the legs
Make sure your skin is clean, dry and free of
grease and cream. Do not use cream before you
start epilating.
C1Snap the protective sleeve onto the skin
cooler.
ENGLISH 9
The protective sleeve prevents an unpleasant
sensation of coldness in your hand while using the
appliance.
C2Snap the appliance onto the skin cooler.
3Put the plug in the wall socket and insert
the appliance plug into the socket in the
bottom of the appliance.
C4Switch the appliance on by selecting the
desired speed.
Speed I: for areas with little hair growth and/or
with bones directly beneath the skin (such as
knees and ankles).
Speed II: for larger areas and/or areas with a
stronger hair growth.
5Stretch your skin with your free hand to
make the hairs stand upright.
C6Place the appliance perpendicularly onto
the skin and move it against the direction
of hair growth.
Make sure both the epilating discs and the skin
cooler touch your skin.
Do not press the appliance onto the skin.
Epilating underarms and bikini line
Type HP6459, HP6457 only
The special underarm skin cooler reduces the
number of active epilating discs. Combined with
ENGLISH10
the large cooling surface, the special underarm
skin cooler makes epilating sensitive areas less
painful.You will get the best results when the hairs
are not too long (max. 1 cm).
C1Snap the protective sleeve onto the skin
cooler.
C2Snap the appliance onto the skin cooler.
C3Switch the appliance on by selecting the
desired speed.
We advise you to use speed II.
C4To shave the underarm area, place one arm
behind your head to stretch the skin and
place the appliance perpendicularly onto
the skin with the hand of the other arm.
5Move the appliance slowly across the skin
against the direction of hair growth.
Shaving
Type HP6459, HP6455 only
You can use the shaving head to shave sensitive
parts of the body, such as the underarms and the
ENGLISH 11
bikini line.With the shaving head you will obtain a
smooth result in a comfortable and gentle way.
1Switch the appliance off.
2Remove the skin cooler.
C3Remove the epilating head.
Press the ribbed sections and slide the epilating
head off the appliance in the direction of the
arrow.
C4Snap the shaving head onto the appliance
by pushing it against the direction of the
arrow ('click').
The shaving head can only be fitted onto the
appliance in one way.
5Switch the appliance on by selecting the
desired speed.
We advise you to use speed I.
6Place the shaving head onto your skin and
move the appliance slowly against the
direction of hair growth, while pressing it
lightly.
Exfoliating (Peeling)
Use the peeling head only on your legs, not on
your underarms or bikini line.
1Switch the appliance off.
ENGLISH12
2Remove the skin cooler.
C3Remove the epilating head.
Press the ribbed section and slide the epilating
head off the appliance in the direction of the
arrow.
C4Snap the peeling head onto the appliance
by pushing it in the direction of the arrow
('click').
The peeling head only fits onto the appliance in
one way.
5Switch the appliance on.
Choose speed I or II, depending on the required
peeling intensity.We recommend peeling each leg
for 1-3 minutes.
- To improve the skin appearance, use the
peeling head once or twice a week.
- Don't use any cream, foam, gel or lotion just
before or during peeling.
- Don't use the peeling head within two days
after epilating.
- For hygienic reasons, the peeling head should
only be used by one person.
- We advise you to peel before going to bed at
night.Any skin irritation that may develop will
diminish overnight.
- After peeling, apply a mild cream or body milk.
ENGLISH 13
Cleaning the appliance
Never rinse the appliance or the adapter plug
with water.
Do not use any corrosive detergents, scouring
pads or cloths, petrol, acetone etc. to clean the
appliance.
1Switch the appliance off, pull the plug out
of the wall socket and pull the appliance
plug out of the appliance socket.
2Remove the skin cooler from the appliance
and slide the protective sleeve off the skin
cooler.
3Clean the skin cooler, the appliance and
the protective sleeve with a moist cloth.
C4Remove the epilating head.
Press the ribbed sections and slide the epilating
head off the appliance in the direction of the
arrow.
C5Clean all accessible parts and the epilating
discs with the brush.
Never try to detach the epilating discs from the
appliance.
C6Slide the epilating head back onto the
appliance against the direction of the
arrow.
The epilating head only fits onto the appliance in
one way.
ENGLISH14
Questo manuale è adatto per i seguenti modelli
12
Indice
Lingue:
Altri manuali Philips Epilatore
Philips
Philips HP6481/02 Manuale utente
Philips
Philips HP6550 Manuale utente
Philips
Philips BRE216 Manuale utente
Philips
Philips HP6459 Satin ICE Optima Manuale utente
Philips
Philips HP6574/11 Manuale utente
Philips
Philips Satinelle Ice HP6496 Manuale utente
Philips
Philips BRE610 Manuale utente
Philips
Philips Satinelle ICE HP6501 Manuale utente
Philips
Philips Satinelle Essential BRE285 Manuale utente
Philips
Philips Satinelle Ice Premium HP6502 Manuale utente
Philips
Philips Satinelle Ice Premium HP6501 Manuale utente
Philips
Philips Lumea SC2009 Manuale utente
Philips
Philips Lumea BRI860 Manuale utente
Philips
Philips 8000 Series Manuale utente
Philips
Philips Satinelle Soft HP6409 Manuale utente
Philips
Philips HP6483/02 Manuale utente
Philips
Philips HP6507 Manuale utente
Philips
Philips SatinSoft HP6519 Manuale utente
Philips
Philips Satinelle Soft HP6409 Manuale utente
Philips
Philips Satin Ice HP6491/00 Manuale utente
