Philips TD6820/AH051P Manuale utente
Safety information
This product may be used legally only in a country where the appropriate
authority has given its specific authorisation. This authorisation appears
on a label at the back of the charger.
The marking on the product certifies its conformity with the technical
regulations for user safety and electromagnetic disturbance which were
applicable on the date of approval in accordance with European Union
Directive No. N°91/263/EEC.
Power requirements
This product requires an electrical supply of 230 volts, alternating
monophased current, excluding IT installations defined in standard
EN 60-950.
Warning:
The electrical network is classified as excessive according to criteria in the
standard EN41-003.
The only way to power down this product is by unplugging the power cable
from the electrical outlet. Make sure the electrical outlet is located close to
the apparatus and is always easily accessible.
It is recommended that this telephone be used as a complement to
another telephone which does not require mains power.
Telephone connection
The voltage on this network is classified as TNV (Telecommunication
Network Voltages, as defined in the standard EN 41-003).
Safety precautions
•Do not allow the handset to come into contact with water.
•Do not open the handset or the charger. This could expose you
to high voltages. Contact our after-sales service for all repairs.
•Do not allow the charging contacts or the battery to come into
contact with conductive materials such as keys, paper clips,
rings, bracelets, etc.
Contents 1
Contents
Introduction 2
Installing your extra handset 3
Deciding where to put the charger 3
Installing the charger on a horizontal surface 3
Mounting the charger on a wall 5
Charging your handset 6
Subscribing your handset to your Xalio base station 7
Using your Xalio 9
Making an outside call 9
Answering an outside call 9
Making an internal call 10
Answering an internal call 10
Using the handset loudspeaker 10
Setting up Baby Sit (Xalio 6820 & 6850 only) 11
Transferring calls 12
Switching on the battery saver 13
Switching off the battery saver 13
Maintenance 14
Changing the battery 14
Caring for your handset 15
Introduction2
Introduction
The Xalio 6800 is an extra handset for the Xalio digital cordless
telephone.
The Xalio 6820 is an extra handset for the Xalio Plus digital
cordless telephone.
The Xalio 6850 is an extra handset for the Xalio Vox digital
cordless telephone with answering machine.
Your Xalio 6800/6820/6850 comprises:
•a charger
•a handset
•a power cable
This guide shows you how to install and use your extra Xalio
handset.
Please refer to the corresponding Xalio user manual for
information on:
•using the phonebook
•using the emergency number
•using the answering machine (Xalio Vox only)
•troubleshooting
Installing your extra handset 3
Installing your extra handset
Deciding where to put the charger
•Place the charger near a mains outlet supplying 230V at 50Hz.
•To reduce to a minimum any interference with other electronic
devices such as telephones, televisions, screens, etc. we
advise you to place your charger at least 50cm from any other
electronic device.
•Place the charger on a flat surface as with the base station or
mount it on a wall.
•Significant obstacles such as concrete walls or metallic
supports (windows and door frames, partitions, etc.) will lessen
the communication range between the base station and the
handset.
Installing the charger on a horizontal surface
Plug the power cable into the charger.
1
Installing your extra handset4
Plug the power cable into the wall socket.
Place the handset in the charger.
2
3
Installing your extra handset 5
Mounting the charger on a wall
Fix the screws (not supplied) according to the diagram
below.
Plug the power cable into the charger as shown on
page 3.
Mount the charger on the screws.
Plug the power cable into the wall socket as shown on
page 4.
Place the handset in the charger.
1
2 - 2.5 mm
8 mm
46 mm
1.5 - 2 mm
3 mm
2
3
4
5
Installing your extra handset6
Charging your handset
Your handset is powered by a rechargeable battery.
Before you use your handset for the first time, charge
it for at least 12 hours. This precaution helps to lengthen the
life of the battery.
To charge the handset, place it on the charger or on the base
station. The bsymbol will appear on the display to indicate that
the battery is charging.
When the bsymbol disappears, your handset is fully charged.
The charger must be connected to a power supply using the power
cable supplied.
Tip
To ensure an optimum handset charge, replace the handset on
the charger regularly.
Installing your extra handset 7
Subscribing your handset to your Xalio
base station
Before you can use your handset, you must subscribe it to your
base station.
Press the button on the base station for 10
seconds.
The base station beeps to indicate that it is now in
subscription mode.
Move the handset to be subscribed close to the base
station and press Rto enter menu mode.
Press -until SUBSCRIBE is displayed.
Press o.
The handset will search for a base station that is in
subscription mode.
After a few seconds, the name or ID number of the base
station will be displayed. In this case go to the next step.
If it cannot find one, NO BASE will be displayed and you will
need to try again.
Press oagain.
CODE? will be displayed.
Enter the subscription code (1590) on the handset
keypad.
Press o.
If the base station has a name, this will be displayed. When
you first use your telephone, the base station name is
PHILIPS. You can delete the existing name using the -
key. If the base station has no name, BASE NAME? will be
displayed.
1
2
3
4
5
6
7
Installing your extra handset8
Enter a name (maximum 8 characters) on the handset
keypad.
If you do not enter a name, the base station keeps its
existing name.
You can enter characters by pressing the key with the
required character on it one or more times. These
characters are printed on the handset keypad. If you wish to
enter two successive characters which are on the same key,
you need to distinguish them by pressing the +key
between the two characters. You delete a character with the
-key.
For example: to enter PHILIPS 1 you would press the
following keys.
Press o.
The new handset beeps to confirm that it has been
subscribed successfully.
Press Rto leave menu mode.
8
Space
9
10
11
Questo manuale è adatto per i seguenti modelli
7
Indice
Altri manuali Philips Cornetta
Philips
Philips C124 Manuale utente
Philips
Philips SE171 Manuale utente
Philips
Philips KALA TD6830 Manuale utente
Philips
Philips SOPHO iSMobile C944 Manuale utente
Philips
Philips Xalio 300 Multihandset Manuale utente
Philips
Philips CB1551B Manuale di istruzioni
Philips
Philips ID9370B Manuale utente
Philips
Philips Zenia 300 Vox Manuale utente
Philips
Philips SE7450B Manuale utente
Philips
Philips DECT2250G - DECT 2250G Cordless Extension... Manuale utente
Philips
Philips SE888 Manuale utente
Philips
Philips VOIP1511B/37 Manuale utente
Philips
Philips Zenia 300 Vox Manuale utente
Philips
Philips CD 1550 Manuale utente
Philips
Philips Kala 200 Manuale utente
Philips
Philips TD6736/BH051P Manuale utente
Philips
Philips KALA TD6830 Manuale utente
Philips
Philips G355 Manuale utente
Philips
Philips TD 6831 Manuale utente
Philips
Philips SOPHO iSMobile C244 Manuale utente
