Philips 26HFL5008D/10 Manuale utente
Philips Hospitality TV
Installation manual for
26HFL5008D/10
32HFL5008D/10
40HFL5008D/10
46HFL5008D/10
55HFL5008D/10
Status: Approved
Version 1.0
Date: June 2013
Author: Marian Pufulete
1
Contents
1. Requirements before starting the installation.......................................................................................................... 2
2. Find out the state of the TV ...................................................................................................................................... 3
3. Re-install TV .............................................................................................................................................................. 4
4. Installation wizard..................................................................................................................................................... 6
5. Channel options ...................................................................................................................................................... 15
a. Reordering channels ...........................................................................................................................................15
b. Rename channels................................................................................................................................................18
c. Hide channels...................................................................................................................................................... 18
6. Professional Setup ..................................................................................................................................................19
7. Welcome Logo.........................................................................................................................................................33
8. Clone /Upgrade .......................................................................................................................................................34
9. Feature settings.......................................................................................................................................................35
10. CSM (Consumer Setup menu) ................................................................................................................................. 39
2
1. Requirements before starting the installation
Before starting the installation, make sure that you have everything you need at hand.
Master remote control 22AV8573 or Guest remote control 22AV1109A
And
USB stick
You will need the master remote control or the guest remote control to access the menus.
To access the setup menu press the ‘RC5 SETUP’ key, and then press the ‘Home/Menu’button.
For the guest remote control, press the following keys sequential: 3, 1, 9, 7, 5, 3, ‘MUTE’.
Note: The sequence: 3,1,9,7,5,3, ‘MUTE’ will not show the Setup Menu if High Security Menu is enabled. (See. Page
19).
For cloning settings from one TV to another TV, you will need to have a USB stick. This stick needs to be formatted as
FAT32 and should be empty.
For the best guest experience check if the software version on the TV is the latest one. This can be done using the
Master Remote control by pressing Recall Button and checking on page ‘2.1 - Current Main Software’. This also can
be done with the Guest Remote by pressing 1,2,3,6,5,4.
Go to: http://www.support.philips.com/support
Enter the model number and check to confirm you have the latest version available.
Confirm the software version present on TV is identical with the one from website. If not please download the latest
version from website, unzip and save on to a USB key The USB key must be format FAT32 and preferably empty to
avoid and accidental upload of wrong setting and software. Follow the instruction how to upgrade the software.
If the software version from your TV is identical with the one available on website it is not necessary to upgrade.
If an upgrade is necessary you can upgrade and clone files at the same time automatically. (Upgrade -> Reboot ->
Clone) --- See Instant Initial Cloning (page 32)
Initial instant cloning option can only be used if you reinstall TV or TV is out the box.
3
2. Find out the state of the TV
It is important to know if a TV is in ‘virgin mode’ (out of the box) or installed before.
If you can see this screen below, you know that the TV is in ‘virgin mode’ and you can install the set. See chapter 4 of
this manual.
If you power on the set and then press the ‘Home’ button on the guest remote, you will see this screen appear, if the
TV already has been installed or if the wizard was already skipped.
Professional Settings mode on
Professional Settings mode off
You can start the installation wizard again by reinstalling the TV as explained in chapter 3 of this manual.
Disable the Professional Settings Mode
Access the setup menu by pressing the ‘RC5 SETUP’ key, and then press the ‘Home/Menu’ button. (For the guest
remote control, press the following keys in sequence: 3,1,9,7,5,3, ‘MUTE’).
Go to Professional Settings Professional Mode and select the OFF option and confirm with “OK”. Go back with
the arrow keys and select Store settings. Confirm with “OK”. After restart the TV will have the Professional Settings
mode set to OFF.
4
3. Re-install TV
If you want to start an installation from scratch you can always re-install the TV. This can be done by using the
option: Re-install TV set.
If Professional Settings are active you can access the setup menu press the ‘RC5 SETUP’ key, and then press the
‘Home/Menu’ button (For the guest remote control, press the following keys in sequence: 3,1,9,7,5,3, ‘MUTE’) , then
go to TV Setup, confirm with “OK”. This menu will appear:
If the Professional Settings Menu is disabled, you can access the Setup menu with the guest remote control. Select
“Setup” and press “OK”.
Select the option TV settings for this menu:
5
Press “OK” to access the sub-menu, navigate to “Reinstall TV”.
Press “OK” to reinstall the TV set.
If all is correct select “YES” and press “OK”.
After this operation the TV will power off and on and display the installation wizard.
Note: All settings are at default values and no channel plan is available.
After reinstalling, the PROFESSIONAL SETTINGS menu will keep the PROFESSIONAL SETTINGS Mode and Room ID, all other parameters will be
reseted to default values.
6
4. Installation wizard
When you turn on the TV for the first time, or you have reinstalled the TV, you should see the following screen.
Here you will need to select your preferred language.
After this, you will need to select the country. Depending on the country selection, some pre-defined settings will be
activated, because of local broadcast requirements. Example: digital/analog channels could be disabled; reordering
and deleting channels can in some cases not be possible.
Note: If you are experiencing some issues after selecting your country, please select ‘Others’ in the menu.
7
The next step is to select ‘Wall mounted’ or ‘On a TV stand’. This option changes some settings for the audio and
image of the TV.
Now you can select the visual and hearing impaired options. If you select ‘On’, your TV will automatically turn on
settings to help visual and hearing impaired people. THE MOST COMMON OPTION IS TO TURN THIS FUNCTION OFF.
On the following page we can start the channel installation wizard. You can also press “Back”to correct any previous
setting. We recommend you only select your preferred options as this will result in longer installation times.
8
For the channel installations, select ‘Install TV channels’ and press ‘OK’
Then you can select ‘Continue’ and press ‘OK’ again.
Here you can select the type of channels you would like to install and what preference you will use.
It is advisable to check the settings before starting the search.
9
Note: If all options are disabled you have to go down to the Digital channels option and set the digital channels to ON.
Installation medium: Allows you to define what type of channels will be installed. Depending on country settings
some channel types might be disabled.
A screen is displayed to make changes to set the channel list/map configuration:
[Symbol rate mode]: Automatic TV will use the preset Symbol rate (6.900/6.875)
Manual Option to set Symbol rate 1 and Symbol rate 2
[Symbol rate 1]: 0.000 (to set)
[Symbol rate 2]: 0.000 (to set)
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali Philips TV
Philips
Philips 286NS-05 Manuale utente
Philips
Philips 22PFS4232/12 Manuale utente
Philips
Philips 29PT7333 Manuale utente
Philips
Philips 8536 Series Manuale utente
Philips
Philips BJ3.1A LA Manuale utente
Philips
Philips 32PFL5606S/98 Manuale utente
Philips
Philips 6554 Series Manuale utente
Philips
Philips 50PUT8215/56 Manuale utente
Philips
Philips 29PT5645 Manuale utente
Philips
Philips Smart Series PS1955C Manuale utente
Philips
Philips MatchLine 29PT9006 Manuale utente
Philips
Philips 22PFL4008H Manuale utente
Philips
Philips 32PF9968/10 Manuale utente
Philips
Philips Matchline 46PP910A Manuale utente
Philips
Philips 21PT 2665 Manuale utente
Philips
Philips 43PUT7908 Manuale utente
Philips
Philips 37PFL5332D - 37" LCD TV Manuale utente
Philips
Philips Matchline 28ML8765 Manuale di istruzioni
Philips
Philips 65PFL5604/F7 A Manuale utente
Philips
Philips 5703 Series Manuale utente
