Philips ADD4962 Manuale utente
User Manual 1-9
Petunjuk Penggunaan 11-19
ADD4962
ADD4964
ADD4970
Dispenser
Main technical specication
1 1
Product overview
2 2
Indicator panel and switch
3 4
Instruction
·UV-LED light
4 5
6
Precautions
5 7
Routine Maintenance
6 8
Trouble shooting 8
9
9
Guarantee and Service
7
Packing list
8
9
Content
1
1 Main technical specication
Model
Rated voltage
Rated frequency
Heating power
Cooling power
Cold water
Environmental temp.
Coolant
Relative humidity
Protection of anti-electric shock
ADD4962 ADD4964 ADD4970
220V
50Hz
Low Power 170W / High Power 350W
85W
≤10℃，2L/h
T
R134a, 38g
≤90%
I
≥90℃, 3.8L/h with high power,
1.8L/h with low power
Hot water
2
2 Product overview
Child Safety Lock
1Lower Cabinet Door
7
Indicator Panel
2Water Bottle Cap with Hose
8
Cold Water Faucet
3Water Bottle
9
Ambient Water Faucet
4Power Switch
10
Hot Water Faucet
5Condenser
11
Drip Tray
6Power Cord
12
Dispenser Flushing Drain
13
1
2
3
4
5
6
8
7
9
10
11
12
13
ADD4962 ADD4964
3
Child Safety Lock
1Lower Cabinet Door
7
Indicator Panel
2Water Bottle Cap with Hose
8
Cold Water Faucet
3Water Bottle
9
Ambient Water Faucet
4Power Switch
10
Hot Water Faucet
5Condenser
11
Drip Tray
6Power Cord
12
Dispenser Flushing Drain
13
1
2
3
4
5
6
8
7
9
10
11
12
13
ADD4970
3 Indicator panel and switch
At the back of the dispenser there is a black switch which controls the heating power. You
may press it to switch between high power, low power and OFF.
Every time when you plug in the water dispenser again, it will need some time for getting hot
and cold water.
Turn the black heating switch to ‘I’, please wait for around 30 minutes for hot water;
Turn the black heating switch to ‘II’, please wait for around 15 minutes for hot water;
Turn the green cooling switch to ‘ON’, please wait for around an hour for cold water.
Low power heating
O
High power heating
Cooling switch
Power Switch
Power on indicator (applicable for ADD4962)
When the dispenser is connected with power and the power button switches on,
the indicator will light up.
Heating indicator
When the dispenser is heating up the water in the hot water tank, the light will go on.
Cooling indicator
When the dispenser is cooling the water in the cold water tank, the light will be on.
Water shortage indicator
When there is no water in the bottle, the water shortage indicator will be on.
Please replace with a new bottle.
UV working status indicator (applicable for ADD4964 and ADD4970)
When the UV sterilization is working, the UV working status indicator will light up.
If there's malfunction with the UV, the light will ash to warn the user.
4
5
4 Instruction
（1）Unpacking the water dispenser
· Cut and remove the straps from the box. DO NOT turn the box upside down, or lay it on its
side. The bottom of the box is separate from the top section. Lift straight up on the top box
section to remove the top box section. Remove the Styrofoam packaging and plastic bag.
Lift the water dispenser o the bottom of the bottom of the box. Wipe it clean if necessary.
· Place the machine on a hard, at surface. Make certain the unit is leveled. The unit should
not be placed near direct sunlight or other source of heat.
· It is best to place the water dispenser in an area with good air circulation. Make sure there is
at least 4 inches (10cm) of space between the back of your water dispenser and the wall.
Keep a minimum distance of 2 inches (5cm) on each side of your water dispenser.
Warning: the drain plug on the back of the unit may become loose during shipping. Fasten
the drain plug tightly before you start to operate the unit. If the drain plug is loose, the unit
may leak and cause oor damage.
(2)Settling water bottle
· Make sure the water dispenser is not plugged into an electrical outlet.
· Open the door of the lower cabinet.
· Place full water bottle on oor. Remove the plastic cover over the mouth of the water bottle.
· Place the stainless tube inside the bottle and place the water bottle cap rmly over the
mouth of the water bottle.
· Attach the hose to the top of the cap using the quick connect system shown below*.
· Slide the bottle inside the cabinet and close the lower cabinet door.
* Your new water dispenser features an adjustable quick connect system. For proper
operation, make sure the connector is sealed tight (Fig. 1);
The connector can be removed easily for cleaning with warm soapy water (Fig. 2);
The stainless steel tube can be adjusted up and down to accommodate both 3 gallon and 5
gallon water bottle (Fig. 3).
6
Note: If there is not a secure connection between the hose cap and the connector on the water
dispenser, the water pump will operate but the water dispenser will not dispense water. Make
sure the hose is connected to the water dispenser correctly.
(3) Dispense water
· Plug the water dispenser into a grounded power outlet. The unit will pump the water from
the water bottle into the cooling and heating tanks.
· Slide the child safety lock to the left rst, then press the hot water faucet until water ows out.
· Turn on the power switch on the back of the unit. The cooling or heating feature will start
running. The indicator light will be on when heating or cooling function is working. Do not
touch both switches during the time.
· Enjoy the hot or cold water you need.
· If you are not going to use hot water, turn the black heating switch to ‘O’; if you are not going
to use cold water, turn the green cooling switch to “OFF” to conserve energy.
Note: please wait until the water pump stops running before using the unit. If the water tank is
not full, no water will dispense from the water faucet.
UV-LED light (applicable for ADD4964 and ADD4970)
The UV-LED light is installed in the cold water tank to kill the bacteria which may grow inside.
It's controlled automatically by the software program once the dispenser is connected with
power.
Warning
When using electrical appliances, basic safety precautions should be followed to reduce the
risk of re, electric shock, and injury to persons or property. Read all instructions before
using any appliance.
· Do not let hot water touch bare skin. Keep combustible material such as furniture, bedding,
pillows, clothes, and/or papers away from the back of the unit.
· Do not operate this, or any other appliance with a damaged power cord. No other appliance
should be plugged into the same outlet. Be sure that the plug is fully inserted into the outlet.
· Do not run the power cord over carpeting or other heat insulators. Do not cover the cord.
Keep cord away from high trac areas, and do not submerge in water.
· We do not recommend the use of extension cord as it may overheat and cause a risk of re.
· Exercise caution and use reasonable supervision when the appliance is used by or near
children.
5 Precautions
7
· Do not use your water dispenser outdoors. Place the water dispenser away from direct
sunlight and make sure that there is at least 4 inches (10cm) of space between the back of
your unit and wall. Keep a minimum of 2 inches (5cm) on each side of your unit free.
· Do not use this product to dispense anything other than water.
· To avoid a hazard due to instability of the appliance, it must be placed on even and at
surface.
· If the supply cord is damaged, please contact aftersales personnel to replace it in order to
avoid a hazard.
· This water dispenser must be positioned so that the plug is accessible.
· Disconnect the plug from the outlet when not in use.
· Remove power plug or disconnect from the main power source before servicing the appliance.
· To avoid accidents, turn o and unplug the water dispenser from the outlet before cleaning.
· A soft damp cloth may be used to clean the surface of the water dispenser. When necessary,
a mild detergent may be used. DO NOT use corrosive chemical solvents to clean the unit, as
this may damage the surface of the water dispenser.
· DO NOT pour water on the exterior of the unit to avoid getting the internal electrical system
wet . DO NOT immerse the unit in water when cleaning.
· The water bottle cap, hose, and drip tray may be washed in a dishwasher (top rack only).
· Keep the water dispenser 6 inches (15cm) away from the wall so it can work properly. Make
certain all ventilation openings are clear of obstruction.
· Do not damage the heating or cooling system, paying particular attention to the black
condenser or heating radiator on the back of the water dispenser.
· If you will not use the water dispenser for a long period of time, please unplug the power
cord and drain the water dispenser. Drain the water from all faucets, then remove the drain
cap on back and allow it to drain. Make certain the drain cap is fastened tightly when nished.
6 Cleaning and maintenance
Questo manuale è adatto per i seguenti modelli
2
Indice
Lingue:
Altri manuali Philips Distributore d'acqua
Philips
Philips WP3892 Manuale utente
Philips
Philips Micro Pure WP3911 Manuale utente
Philips
Philips WP3812 Micro X-Pure Manuale utente
Philips
Philips Pure Taste WP3961 Manuale utente
Philips
Philips ADD4952 Manuale utente
Philips
Philips ADD4954 Manuale utente
Philips
Philips WP3890 Manuale utente
Philips
Philips ADD5910M Manuale utente
Philips
Philips WP3890 Manuale utente
Philips
Philips ADD4963 Manuale utente
