Philips WP3820 Manuale utente
WP3820
2
3
1
4
WP3820
ENGLISH 6
PORTUGUÊS DO BRASIL 22
6
Introduction
Congratulations on your purchase and welcome to Philips!To fully
benet from the support that Philips offers, register your product at
www.philips.com/welcome.
General description (Fig. 1)
AFilter cartridge
B Water purier housing
CFilter capacity selection button
DBattery low indication
E Selected lter capacity indication
F Remaining lter capacity indication
GReset button
HWater selection lever
IBattery compartment cover
JStainless steel screen
KRubber washer
LAdapter
1A-type
2B-type
3C-type
4D-type
MAttachment nut
NFiltered water outlet
O Unltered water inlet
PGranular activated carbon
Q Hollow bre
R Unltered water outlet
Important
Read this user manual carefully before you use the appliance and save it
for future reference.
ENGLISH
Warning
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with
the appliance.
Before use
To prevent quick clogging of the lter cartridge, let the water run at
the unltered setting for around 5 seconds before every use.
If the water is highly coloured or turbid due to work on your water
network, do not let the water run at the ltered setting until the
water is clear.
Let the water run at the ltered setting for 10 seconds before the
rst use of the day.
Let the water run at the ltered setting for 60 seconds before use if
you have not used the water purier for more than two days.
If you have not used the water purier for more than two weeks, let
the water run at the ltered setting for 2-3 minutes before use. If the
lter cartridge emits an unpleasant smell, replace it with a new one.
Water temperature
Do not let water hotter than 50°C run through the water purier,
because this may damage the appliance.
Do not let the water purier freeze.
Battery
To prevent that the battery leaks, overheats or explodes:
Do not disassemble the battery.
Do not charge the battery.
Do not use a damaged battery.
Do not expose the battery to water or high humidity levels.
Do not expose the battery to direct sunlight, high temperatures or
re.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH 7
Any liquid leaking from the battery is harmful to eyes and skin. Avoid
eye and skin contact.
Applications
Only use the appliance to lter water that meets drinking water
standards at the point of use.
Do not block the ltered water outlet or connect other devices to it.
If the water pressure is very high, reduce the water ow of the tap to
prevent damage to the cartridge.
Keep the water purier away from heat to avoid distortion or
breakage.
Do not tamper with the water purier.
Do not remove the lter cartridge while you use water purier.
Do not use the water purier without a lter cartridge.
Do not place the appliance near a window where it is exposed to
direct sunlight.
This appliance does not soften water.
Do not use ltered water in aquariums. Tap water, ltered or
unltered, can be harmful to sh.
Do not store puried water to avoid contamination. Air contact
contaminates puried water quickly. If you want to store puried
water, use a clean container and keep it in the refrigerator. Do not
keep it in the refrigerator longer than 1 day to avoid contamination.
Features
Philips’ multi-ltration system consists of a primary lter, a secondary
lter, a high-tech hollow-bre membrane lter and a granular
activated carbon lter.
The hollow bre membrane contains more than 520 billion
micropores that are small enough to remove particles down to
0.1µm. It eliminates 99.99%* of bacteria, rust and other particles
larger than the micropore size from your tap water without removing
calcium, magnesium and other minerals that are vital to your body.
(* tested according to Japanese Water Purier Association (JWPA)
standard).
-
-
-
-
-
-
-
-
-
-
-
-
-
-
ENGLISH8
The granular activated carbon removes the unpleasant chlorine smell
and taste from your tap water.
The LCD display on the water purier shows the current remaining
lter capacity. A remaining lter capacity of 0 tells you that you
have to replace the lter. Philips’ unique cartridge replacement
indicator also helps you to determine when to replace the lter.
The high-speed initial ow rate of 2 litres per minute gives you plenty
of clean water instantly.
The water selection lever offers you a choice of three water ow
types: unltered spray, unltered stream or ltered spray.
The nine tap-mounting adapters supplied with the water purier
allow easy installation on almost any type of tap.
The bayonet-type mount ensures quick, easy and secure lter
cartridge replacement.
Preparing for use
Inserting the battery
Before you insert the battery, make sure your hands and the water
purier are dry.
Keep away from the kitchen sink to prevent the battery from falling
down the drain.
Insert the battery before you install the water purier on the tap.
1 Use a coin to turn the battery compartment cover on the back of
the water purier in the ‘OPEN’ direction. Remove the battery
compartment cover (Fig. 2).
2 Place the battery (included) in the cover, with the + pole facing the
battery compartment cover (Fig. 3).
3 Place the battery compartment cover back onto the water purier
in such a way that the ‘%’ mark on the cover is aligned with the ‘I’
mark on the water purier. (Fig. 4)
4 Use a coin to turn the battery cover in the ‘CLOSE’ direction until
the ‘I’ mark on the cover is aligned with the ‘I’ mark on the water
purier (Fig. 5).
-
-
-
-
-
-
-
-
-
ENGLISH 9
Note: Make sure you align the ‘I’ marks properly, otherwise water may leak
into the battery compartment.
When the battery is properly inserted, the LCD display performs a
self-check for approx. 9 seconds. Then the display goes off again.
Before installation
The screw thread of the tap is sharp.
Before you install the water purier, make sure all tap-mounting
adapters you require are present.
The tap must have a diameter of 13mm-25mm.
Determine what type of tap you have and select the appropriate
adapter.
The adapters supplied make the water purier suitable for almost
any kitchen tap. However, the water purier may not t some
uncommon types of taps.
The tap water pressure has to be between 0.7kgf/cm² (7 metres of
water column) and 3.5kgf/cm² (35 metres of water column). If you
use the water purier at a water pressure outside this range, either
the ltered water ow will be extremely low or the water purier
will get damaged.
Installation A-type adapter
For taps with a round spout with a diameter of 16mm, 17.5mm or
19mm (Fig. 6).
1 Remove the attachment nut and the adapter from the water
purier housing (Fig. 7).
2 Pass the attachment nut over the tap spout (Fig. 8).
3 Place the matching adapter (A-type) over the tip of the spout. The
16mm adapter is packed with the water purier. If necessary,
replace it with the 17.5mm adapter or 19mm adapter to t the
diameter of your tap (Fig. 9).
4 Screw the attachment nut rmly onto the water purier
housing (Fig. 10).
,
-
-
-
-
-
-
ENGLISH10
Indice
Lingue:
Altri manuali Philips Sistema di filtraggio dell'acqua
Philips
Philips AWP3753 Manuale utente
Philips
Philips FC8044/02 Manuale utente
Philips
Philips AUT7006 Manuale utente
Philips
Philips AWP2980 Manuale utente
Philips
Philips Pure Taste WP3861 Manuale utente
Philips
Philips WP3870 Manuale utente
Philips
Philips AUT2015 Manuale utente
Philips
Philips AWP1775 Manuale utente
Philips
Philips WP3891/01 Manuale utente
Philips
Philips Saeco BRITA INTENZA+ Manuale utente
Philips
Philips WP3893/01 Manuale utente
Philips
Philips Pure Taste WP3861 Manuale utente
Philips
Philips WP3892/01 Manuale utente
Philips
Philips AC4012 Manuale utente
Philips
Philips Micro Pure WP3811 Manuale utente
Philips
Philips AWP3753 Manuale utente
Philips
Philips AWP1775WH Manuale utente
Philips
Philips AWP1811 Manuale utente
Philips
Philips AC4144 Manuale utente
Philips
Philips HD3802 Manuale utente
