Philips ITS4843B Manuale utente

IntelliVue Smart-hopping

1.4 GHz Access Point

Installation Guide

Part Number: 453564414871

Printed in the U.S.A.

April, 2017

Second Edition

453564414871

Network

power/Sync

Radio

Activity

Link

10/100 48 VDC

IOIOI

Serial Service Port

Proprietary Information

This document contains proprietary information that is protected by copyright.

Manufacturer

Philips Medical Systems

3000 Minuteman Road

Andover, MA 01810-1099

(+1) 978-687-1501

This document was printed in the United States of America.

Trademark Acknowledgments

All trademarks, trade names and company names referenced herein are used for identification purposes only and are the

property of their respective owners.

FCC Notice

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) these devices

may not cause harmful interference, and (2) these devices must accept any interference received, including interference

that may cause undesired operation.

Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this equipment not expressly approved by Philips

Medical Systems may cause harmful radio frequency interference, and void your authority to operate this equipment.

This device has been designed to operate with the antenna having the part number 453564079561 and having a maximum

gain of 3.2 dB. Antennas not included in this approved list or having a gain greater than 3.2 dB are strictly prohibited for use

with this device. The required antenna impedance is 50 ohms.

Warranty

The information contained in this document is subject to change without notice. Philips Medical Systems makes no warranty

of any kind with regard to this material, including, but not limited to, the implied warranties or merchantability and fitness for

a particular purpose. Philips Medical Systems shall not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use of this material.

Printing History

New editions of this document will incorporate all material updated since the previous edition. The documentation printing

date and part number indicate its current edition. The printing date and edition number change when a new edition is

printed. The document part number changes when extensive technical changes are incorporated.

First Edition...................................................................................................................................................August, 2013

Second Edition ................................................................................................................................................................... April, 2017

IntelliVue Smart-hopping 1.4 GHz Access Point Installation Guide iii

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

A General Description of the IntelliVue Smart-hopping Core Access Point . . . . . 1-3

Core AP Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Synchronization Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

IntelliVue Patient Monitor Mobility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Technical Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Firmware Updates. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Management Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Connectors and Status Indicators (ITS4834D) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

IntelliVue Smart-hopping Core AP Connectors . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Remote AP Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Connectors and Status Indicators (ITS4834B and ITS4834C) . . . . . . . . . . . . . . 1-9

IntelliVue Smart-hopping Core AP Connectors . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Remote AP Connectors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

IntelliVue Smart-hopping Core AP Status LEDs. . . . . . . . . . . . . . . . . . . . . . . 1-11

Remote Antenna Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12

Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-15

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16

FCC Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16

Access Point Placement Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

ITS4843D Installation Procedure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

ITS4843B and ITS4843C Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Mounting the IntelliVue Smart-hopping Core AP to a Wall (Fixed Mount) . . . . . . 2-9

Mounting the IntelliVue Smart-hopping Core AP to a Wall

(CA Earthquake Rated) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Mounting the IntelliVue Smart-hopping Core AP Above a Ceiling Tile . . . . . . . . 2-12

Mounting the IntelliVue Smart-hopping Core AP Below a Ceiling Tile

(Fixed Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

Mounting the IntelliVue Smart-hopping Core AP Below a Ceiling Tile

(Quick Release) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Mounting the IntelliVue Smart-hopping Remote Antenna to a Wall

(Fixed Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24

Contents

Mounting the IntelliVue Smart-hopping Remote Antenna to a Wall

(CA Earthquake Rated) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26

Mounting the IntelliVue Smart-hopping Remote Antenna Above a Ceiling Tile

(Mounting Rails). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28

Mounting the IntelliVue Smart-hopping Remote Antenna Above a Ceiling Tile

(Tether Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31

Mounting the IntelliVue Smart-hopping Remote Antenna Below a Ceiling Tile

(Fixed Mount) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-33

Mounting the IntelliVue Smart-hopping RA Below a Ceiling Tile

(Quick Release) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37

AP Configuration Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40

Access Point Startup Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-40

Maintenance Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Troubleshooting the Core AP Using its LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Troubleshooting the Remote Antenna Using its LEDs . . . . . . . . . . . . . . . . . . . . . 3-4

Replacing a Core AP or Remote Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Ordering Replacement Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Philips Sales and Support Offices Worldwide . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

CORPORATE HEADQUARTERS:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

UNITED STATES: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

CANADA:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

EUROPE, MIDDLE EAST AND AFRICA: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

LATIN AMERICA HEADQUARTERS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

ASIA PACIFIC HEADQUARTERS: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

IntelliVue Smart-hopping 1.4 GHz Access Point Installation Guide v

About This Guide

This IntelliVue Smart-hopping 1.4 GHz Access Point Installation Guide

provides complete instructions and procedures for installing the Philips

IntelliVue Smart-hopping 1.4 GHz Core Access Point and Remote

Antennas. This section describes the document and includes:

• Audience

•DocumentOrganization

• Notational Conventions

• Related Documentation

•Terminology

About This Guide

Audience

The IntelliVue Smart-hopping 1.4 GHz Access Point Installation Guide is

written for trained service personnel who will install the IntelliVue Smart-

hopping 1.4 GHz Core Access Point as part of an overall IntelliVue Smart-

hopping deployment.

Document Organization

The information in this guide is organized and presented as follows:

•Chapter 1, Overview, describes the IntelliVue Smart-hopping 1.4 GHz

Core Access Point and how it is used to provide a bi-directional data

flow between the IntelliVue Information Center and IntelliVue Patient

Monitors.

•Chapter 2, Installing the IntelliVue Smart-hopping 1.4 GHz Access

Point, provides procedures to physically install the Philips IntelliVue

Smart-hopping 1.4 GHz Core Access Point and includes instructions

for mounting the Core AP and Remote Antennas to a wall, above a

ceiling tile, and below a ceiling tile.

•Chapter 3, Maintaining the IntelliVue Smart-hopping 1.4 GHz Core

Access Point, provides procedures to maintain and troubleshoot

operation of the Philips IntelliVue Smart-hopping 1.4 GHz Core Access

Point.

Notational Conventions

This guide uses the following notational conventions to convey

information:

Note Notes call attention to important information.

Caution Cautionary statements call attention to a condition that could result in loss

of data or damage to equipment.

Warning Warnings call attention to a condition that could result in physical injury.

About This Guide

IntelliVue Smart-hopping 1.4 GHz Access Point Installation Guide vii

Related Documentation

Please refer to these other documents for additional installation service

information about the IntelliVue Smart-hopping infrastructure:

•IntelliVue Smart-hopping Access Point Controller Installation Guide -

provides procedures to physically install and power the IntelliVue

Smart-hopping Access Point Controller at the clinical site.

• IntelliVue Smart-hopping 2.4 GHz Access Point Installation Guide -

gives procedures to install the IntelliVue Smart-hopping 2.4 GHz AP at

the clinical site to a wall, or above or below a ceiling tile.

• IntelliVue Smart-hopping Infrastructure Installation and Service Guide

- provides complete information and procedures to install, configure,

inter-connect, and deploy the IntelliVue Smart-hopping infrastructure

at the clinical site. This document includes site planning guidelines,

procedures for use of the APC command line and graphical user

interfaces, AP configuration procedures, and APC and AP firmware

deployment procedures.

• IntelliVue Smart-hopping Sync Unit Installation Guide - lists procedures

to install the IntelliVue Smart-hopping Sync Unit at the clinical site.

• Upgrading IntelliVue Smart-hopping Access Point Controllers and

Access Points - gives procedures to use the Philips IntelliVue Smart-

hopping APC and AP Upgrade Tool to install and synchronize the

firmware version on IntelliVue Smart-hopping APCs and APs.

viii

About This Guide

Terminology

Please note the following terms, acronyms, and abbreviations used

throughout this document and in related documentation:

•Access Point (AP) - An IntelliVue Smart-hopping component that

provides bi-directional wireless access to the monitoring network for

IntelliVue Patient Monitors.

•Access Point Controller (APC) - An IntelliVue Smart-hopping component

used to manage the operation of the Access Points. One APC is

elected the Master APC. The Master APC supports the web interface to

the system and manages the master configuration.

•Access Point Group/AP Group - A logical grouping of APs. AP members

of the same AP Group will inherit common configuration settings

(defaults). AP groups will often map logically to the clinical units in

which the IntelliVue Smart-hopping Infrastructure is being installed.

•Database Domain (DBSD) - This term is used to describe the

“network” that contains the Standalone IntelliVue Information Center,

or the IntelliVue Database Server and its connected Information

Centers, Clients, bedsides, and infrastructure. This term applies to

both routed and non-routed topologies.

•IntelliVue Network - This term refers to the entire IntelliVue network. In

a routed topology, the IntelliVue Network includes the routers and all

inter-connected Database Domain(s) and the IntelliVue Smart-hopping

Infrastructure wireless subnet.

•IntelliVue Patient Monitor (IPM) - The IntelliVue Patient Monitor relays

real-time physiological waveforms and trends to the Philips IntelliVue

Information Center (PIIC) or Philips IntelliVue Information Center iX

(PIIC iX).

•IntelliVue Smart-hopping infrastructure - Philips proprietary wireless

network designed for continuous monitoring that provides two-way

communications between IntelliVue Patient Monitors, and the

IntelliVue Information Center.

•IntelliVue Smart-hopping Infrastructure Service Tool - The software

used to upgrade IntelliVue Smart-hopping APCs and APs, verify that

APCs on your network are configured correctly, and display warning

and error messages that you may use to troubleshoot any

configuration errors that may exist on your IntelliVue Smart-hopping

network. The IntelliVue Smart-hopping Infrastructure Service Tool is

also referred to as the Upgrade Tool. This tool was previously referred

to as the Upgrade Wizard.

•IntelliVue Telemetry System (ITS) - Deprecated term for the cellular

wireless architecture that provides two-way communications between

IntelliVue Patient Monitors, and the IntelliVue Information Center. See

IntelliVue Smart-hopping infrastructure.

•IntelliVue Wireless Subnet - This term is used to describe the IntelliVue

Smart-hopping Infrastructure “network” that contains the

About This Guide

IntelliVue Smart-hopping 1.4 GHz Access Point Installation Guide ix

infrastructure used in a routed topology to connect IntelliVue Smart-

hopping Infrastructure devices.

•Partnered APC - Configurable element within an AP Group used to

determine which APC will manage the operation of the AP members of

a particular AP Group.

•Power over Ethernet (PoE) Switch - The Power over Ethernet (PoE)

Switch is a 24-port Power-over-Ethernet device that provides 48 VDC

power to IntelliVue Access Points (and also remote Sync Units if

connected) via 100-Base-TX Ethernet LAN cabling. For systems using a

Power over Ethernet Switch, the ITS4844A Tele Synchronization Unit is

required to use the PoE feature of the PoE Switch.

•Power over Ethernet (PoE) Unit - The Power over Ethernet (PoE) Unit is

a 6- or 12-port Power-over-Ethernet device that provides 48 VDC power

to IntelliVue Access Points (and also remote Sync Units if connected)

via 100-Base-TX Ethernet LAN cabling.

•RF Access Code - Configurable element in the IntelliVue Smart-

hopping AP defaults shared among APs and IntelliVue Patient Monitors

to control wireless access to the monitoring network. Portable devices

will only connect to access points with which they share access codes.

The RF Access Code allows a specific wireless client that is

programmed with a matching Access Point RF Access Code to connect

to that Access Point.

•Synchronization (Sync) Unit - The IntelliVue Smart-hopping Sync Unit

provides a necessary common clock signal to synchronize all the

IntelliVue Access Points in the system. As patients ambulate around

the hospital coverage area their transmitted data are handed over

from one AP to another seamlessly without interruption or data loss.

The ITS4844A (866212) IntelliVue Smart-hopping Synchronization

Unit provides the same features as the M4844A (862114) Sync Unit,

but is required to use the PoE feature of the PoE Switch.

•System ID - Configurable element in the APC Configuration to logically

associate Access Points and Access Point Controllers operating within

the same IntelliVue Smart-hopping Infrastructure.

•Uninterruptible Power Supply (UPS) - The UPS supplies backup power

to protect against hospital generator changeover interruptions, and

short power line transients.

About This Guide

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Philips Punto di accesso wireless

Philips

Philips Smart-hopping 2.0 Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente