Phoenix Spider MT505 Manuale utente

Spider MT505 SIP
USER MANUAL
Page 1

INDEX
Overview
.....................................................Page 03
Connecting the Spider
.....................................................Page 04
The Control Portal
.....................................................Page 05
Using the Spider
.....................................................Page 06
•Dialing
.....................................................Page 06
• Incoming Call
.....................................................Page 06
• During A Call
.....................................................Page 07
Display
.....................................................Page 08
Device Menu
.....................................................Page 09
External Mic/Speaker
.....................................................Page 13
Daisy Chaining
.....................................................Page 15
Specifications
.....................................................Page 17
Warranty
.....................................................Page 18
Page 2

SPIDER 505 SIP OVERVIEW
The Spider is a high-quality conference speakerphone that will turn any room into a
professionally sounding conference room. It has an exceptionally large pickup and broadcasting
range, yet is small in size and discreet in design.
The Spider utilizes multiple microphones, a uniquely designed speaker, and a powerful DSP to
achieve commanding performance.
This guide will help you learn how to use your conference phone and will reveal all the features
that come with it.
Page 3

CONNECTING YOUR SPIDER
CONNECTING TO A COMPUTER
This connection is for any session using your computer, such as Voice over IP applications
(Skype, Vidyo, etc.).
‣Using the USB cable provided, plug the micro USB side of the cable into the Spider
(USB connector located on the connector panel below the unit).
‣Plug the USB end of the cable into any USB port on your computer.
‣Connect the provided Power Supply to the DC connector located on the connector panel
below the unit. Once you plug the Power Supply into a power source, your Spider is
ready for use.
No additional drivers or steps are needed. However, we do recommend downloading and using
our “Phoenix Audio Setup Utility” for optimal audio control and performance. This utility can be
found on our website: www.phnxaudio.com/downloads/audiosetup/
Page 4

CONNECTING TO A SIP/IP LINE
For any session using an IP telephone provider (IP/SIP).
‣Using the Ethernet cable provided, plug one end of the cable into the Spider’s Ethernet
connector (located on the connector panel below the unit).
‣Plug the other end of the cable directly into your Ethernet wall socket.
‣Make sure that the Spider is either plugged into a power source OR that your home or
office is equipped with Power over Ethernet (PoE).
‣It is important that your Spider is registered with an IP service provider (See the
following Control Portal section).
THE CONTROL PORTAL (SETTING UP THE SIP)
The online control portal will allow you to control and adjust all of your IP phone settings. To
access:
‣Enter the phone menu by pressing .
‣Using the and buttons, scroll to “Information” and click to select (or just
press the number 7 after entering the menu).
‣The first option under the “Information” submenu is your unit’s IP address.
‣Open a web browser and type in your Spider’s IP address in the address bar and press
enter.
‣A Username / Password prompt will appear. Enter admin as your username and 1234
as your password, then click on “Log In”.
NOTE: To access the portal, your computer must be located on the same LAN as the Spider.
PORTAL OVERVIEW
QUICK SETUP
Adjust the LAN, SIP Proxy, and Registrar options.
PERSONAL SETTINGS
Directory
Add contacts to phone.
Page 5

Speed Dial
Assign up to 10 numbers for the speed dial list.
Tones
Select from the existing ringtones or upload custom ringtones (not implemented in all
versions).
NETWORK CONNECTIONS
Adjust the LAN and VLAN settings.
USING THE SPIDER
DIALING
‣If the keypad is dimmed, press any key to turn on the backlight.
‣Dial the desired number and press . .
OR
‣Press to get a dial tone. The screen will display the last dialed number. Press
again to redial, or dial any new number at will.
INCOMING CALL
When the Spider receives an incoming call, the display will notify you of the caller ID, a ringtone
will play, and the grill lights will flash blue.
TAKE CALL
Press OR the left function button .
REJECT CALL
Press OR the right function button (this will hang-up the call).
SILENCE CALL
Press the middle function button (the Spider will continue ringing, only without an
audible ringtone).
Page 6

DURING A CALL
THE DIRECTIONAL ARRAY
During a call the Spider uses a proprietary Beamforming technology to locate a legitimate voice
source, and to steer an array towards it. This allows the Spider to focus on the speaker in the
room and to cancel out all other noises. The Beamforming process is dynamic and adjusts the
direction of the array when the source of sound changes or moves. When in a call and a voice is
detected in the room, a single or multiple blue lights located under the grill will indicate which
direction the Spider’s audio beam is focusing on. This is the direction that will be heard best by
the far-end of the call (the person you are talking to).
NOTE: This function can be disabled (see page 12).
VOLUME CONTROL
Use the and buttons on the keypad to control the speaker volume during a call.
MUTE
In order to mute the Spider’s microphones during a call, press the button located on the
bottom right of the keypad. When muted, a MUTE symbol will appear on the screen and all the
grill lights will flash red.
To UNMUTE, just press the button again.
TRANSFER A CALL (to transfer your call to a different phone)
‣Press the left function key .
‣Dial the intended number to be transferred to.
‣Press the left function key once more to complete the transfer.
CONFERENCE A CALL (conference a new source into your existing call)
‣Press the middle function key .
‣Dial the intended number to add into the call.
‣Press the middle function key once more to complete the conference.
END CALL
‣Press the button OR the right function key .
‣All the grill lights will show solid red for three seconds.
Page 7

DISPLAY
DISPLAY SETTINGS
Can be found in the Administration section of the MAIN MENU (see page 12.)
IDLE DISPLAY
Choose what is shown on the screen of the Spider when the unit is idle. “ID” is the name given
by the IP service provider, while “Name” can be configured via the CONTROL PORTAL.
GRILL LIGHT
Turn ON/OFF the blue and red lights that appear under the grill during a call (incoming call,
mute, Beamforming, and hanging up).
DISPLAY BRIGHTNESS
Scroll using the and buttons to choose a display brightness setting.
CONNECTIVITY DISPLAY
On the top left corner of the screen, the Spider will display the interface it’s connected to.
TELEPHONE SYMBOL
If a symbol appears, then your Spider is connected to and has registered with an IP service
provider. The Spider’s IP interface is ready to be used.
CROSSED TELEPHONE SYMBOL
If a symbol appears, then your Spider is either not connected or not registered with an IP
service provider. The Spider’s IP interface is not functional.
USB SYMBOL
If a symbol appears, your Spider is connected to a computer and is ready to act as a
microphone/speaker for that computer.
Page 8

DURING A CALL
CALL TIMER
In the top left corner of the screen you will see a timer that will start when your call is picked up
and will stop when the call is disconnected.
CALLER ID
The center of the screen will display the phone number the Spider is in a session with. If that
number has a caller ID name, that name will be displayed.
DEVICE MENU
To enter the menu, click on the button.
Page 9

NAVIGATING THE MENU
ENTER
The button functions as ENTER and will take you one step forward in the menu.
BACK
The right function key is BACK and will return you one step back in the menu.
EXIT
The button will EXIT the menu and will return you to the Spider’s main display.
MENU CATEGORIES
CALL LOG
The Spider’s call history.
You can clear complete call logs by using the middle function button in the general CALL LOG
menu , or clear a specific call by using the middle function button inside any of the sub-
logs listed below. Scroll through the lists using the and buttons, and dial the number by
selecting it with the button or the left function button . Exit back to the call log menu
using the right function button .
Dialed Calls
The last 1000 phone numbers dialed from the Spider.
Received Calls
The last 1000 phone numbers answered from the Spider.
Missed Calls
The last 1000 incoming phone numbers not answered from the Spider.
Page 10
Indice
Altri manuali Phoenix Telefono IP


















