Phonak Cleck'nTalk Manuale utente
User Guide / Gebrauchsanweisung / Mode d’emploi
Manuale d’uso / Instrucciones de uso
Gebruiksaanwijzing / Betjeningsvejledning
Bruksanvisning / Guia do Utilizador
3
!Label / Schild / Etiquette / Etichetta /
Etiqueta / Label / Etiket / Etikett / Etikett /
Etiqueta
"Plug / Steckverbinder / Connecteur /
Presa audio / Conector /Stekker / Stik /
Kontakt / Plugg / Conector
#Microphone / Mikrofon / Microphone /
Microfono / Micrófono / Microfoon /
Mikrofon / Mikrofon / Microfone
Description
"
#
!
ALL
4
Congratulations on choosing the Click’nTalk from
Phonak. Click’nTalk enables the wireless transfer of a
telephone call directly to a wide range of Phonak
hearing instruments in digital sound quality and to
both ears simultaneously.
Click’nTalk offers high speech quality from your mobile
phone to your hearing instruments.
Please read this manual carefully to benefit from all
the features of your Click’nTalk. Ask your hearing care
professional if you have any questions.
For further information, please visit the Phonak website
www.phonak.com.
Phonak – life is on
Important
Each Click’nTalk model fits specific types
and brands of mobile phones. Please go to
http://clickntalk.phonak.com/ and follow the
compatibility guide instructions.
Please also refer to your mobile phone user
manual for details about your mobile phone.
Welcome GB
5
Attach Click’nTalk gently to the audio plug !. The plug
position and appearance may vary depending on the
mobile phone model.
After a few seconds a headset icon appears
on the mobile phone screen. Make sure you select
the “wired headset” from the mobile phone’s
menu if necessary.
For transportation, unplug Click’nTalk.
Hold Click’nTalk with two fingers and gently pull
the device from the audio plug ".
Before making a call, always ensure Click’nTalk
is firmly attached.
Getting started
!
"
!
GB
6
Using your phone
Use the mobile phone buttons
to accept, make and end calls !.
Enable the key- and ringtones
for faster connection to
the hearing instruments.
Move the mobile phone into normal
talking position ". The hearing
instruments will automatically switch
to phone mode within 2 seconds.
To switch back the hearing instruments into normal
hearing mode, simply put Click’nTalk out of reach
(> 40cm/16’’) from the hearing instruments.
To prevent you disconnecting from the phone mode too
quickly the hearing instruments stay in the phone
mode for 13 seconds once Click’nTalk is out of reach.
The maximum distance of the Click’nTalk to both your
hearing instruments should not exceed 25cm/9’’ during
the call. You may encounter drops in the signal when
moving the mobile phone (e.g. changing the ear) this
is normal and does not affect the connection to your
conversation partner.
!
"
7
Muting the microphone
Muting or un-muting the microphone is done in the
same way as for a mobile phone wired headset. Please
refer to your mobile phone user manual for details.
Combination of Click’nTalk with other devices
Click’nTalk is designed to exclusively work with your
Phonak hearing instruments. Simultaneous usage
with other devices such as iCom or neck loops is not
recommended.
Battery
Click’nTalk is powered through the plug directly and
will reduce the standby time of the mobile phone
by approximately 10%. For longer standby time of the
mobile phone, unplug Click’nTalk when not in use.
Before charging your mobile phone, remove Click’nTalk
from the plug.
GB
8
Important information
Clean Click’nTalk using a damp cloth. Never use
cleaning products or alcohol.
Protect Click’nTalk from excessive moisture, heat,
excessive shock and vibration.
– Do not touch the pins of the plug and protect
the microphone opening and connector from dirt
and debris.
Keep this device out of reach of children under
3 years.
People using medical devices such as pacemakers
are not permitted to use this device.
The digitally-coded, inductive transmission
technology used in this device is extremely reliable
and experiences virtually no interference from other
devices. It should be noted, however, that when
operating the device near a computer terminal or
other strong electromagnetic fields, it may be
necessary to be at least 60 cm (24”) away to ensure
proper operation.
X-ray radiation, CT or MRI scans may destroy or
adversely affect the correct functioning of this
device. Do not use this device in locations where it
is forbidden to use electronic devices.
If the sound quality is not satisfactory your hearing
care professional may be able to improve this.
9
– Do not make any changes or modifications to
this device.
Opening Click’nTalk will damage it. If problems
occur which cannot be resolved by following the
guidelines in this user guide consult your hearing
care professional. Click’nTalk may only be repaired
by an authorized service center.
In areas with weak GSM coverage, the mobile
phone might induce interference signals causing
some noise in the hearing instruments.
Connecting to wrong mobile phone models could
harm the mobile phone or Click’nTalk.
See http://clickntalk.phonak.com/ for a list of
supported phones.
Gently plug or unplug the device. Inappropriate
force may damage the device.
The plug "may look different depending on the
Click’nTalk model.
GB
10
Herzlichen Glückwunsch zu Ihrem neuen Click’nTalk
von Phonak. Click’nTalk ermöglicht die drahtlose
Übertragung eines Telefonanrufs in digitaler Klang-
qualität direkt an eine große Vielzahl von Phonak
Hörsystemen und auf beide Ohren zugleich.
Click’nTalk bietet eine hohe Sprachqualität bei der
Übertragung von Ihrem Mobiltelefon an Ihr Hörsystem.
Bitte lesen Sie diese Gebrauchsanweisung sorgfältig
durch, um von allen Möglichkeiten Ihres neuen
Click’nTalk zu profitieren. Bei Fragen wird Ihnen Ihr
Hörgeräteakustiker gerne Auskunft geben.
Für detailliertere Informationen besuchen Sie bitte
die Phonak Website www.phonak.com.
Phonak – life is on
Wichtig
Jedes Click’nTalk Modell passt zu bestimmten Mobil-
telefontypen und -marken. Bitte gehen Sie zu
http://clickntalk.phonak.com/ und folgen Sie dort den
Anweisungen des Kompatibilitätsleitfadens.
Nähere Angaben zu Ihrem Mobiltelefon finden
Sie in Ihrem Mobiltelefonhandbuch.
Willkommen DE
11
Verbinden Sie den Click’nTalk vorsichtig mit dem Audio-
steckverbinder !. Position und Aussehen des Steck-
verbinders können je nach Mobiltelefonmodell variieren.
Nach einigen Sekunden wird im Display des Mobiltele-
fons ein Kopfhörersymbol angezeigt. Stellen Sie
sicher, dass Sie ggf. die Option «Kopfhörer» im Menü
des Mobiltelefons ausgewählt haben.
Entfernen Sie für den Transport den Steckverbinder
vom Click’nTalk. Halten Sie das Click’nTalk vorsich-
tig zwischen zwei Fingern und ziehen Sie das Gerät
vom Audiosteckverbinder "ab.
Stellen Sie vor einem Telefonat stets sicher, dass
das Click’nTalk fest angebracht ist.
Erste Schritte
!
"
!
DE
Indice
Lingue:
Altri manuali Phonak Apparecchio acustico
Phonak
Phonak Bolero V90-M Manuale utente
Phonak
Phonak RogerDirect Roger X Manuale utente
Phonak
Phonak invisity Manuale utente
Phonak
Phonak ZoomLink+ Manuale utente
Phonak
Phonak Roger Clip-On Mic Manuale utente
Phonak
Phonak roger Manuale utente
Phonak
Phonak Lyric Manuale utente
Phonak
Phonak Roger Table Mic Manuale utente
Phonak
Phonak iView Manuale utente
Phonak
Phonak Behind-the-Ear hearing aids Manuale utente
Phonak
Phonak Audeo V90-10 Manuale utente
Phonak
Phonak Exelia series Manuale utente
Phonak
Phonak SDS 4.0 Fit & Go Istruzioni per il montaggio
Phonak
Phonak Brio 4 B-312 Manuale utente
Phonak
Phonak Nathos Manuale utente
Phonak
Phonak microSavia Art CRT Manuale utente
Phonak
Phonak inspiro Manuale utente
Phonak
Phonak Audeo B90-R Manuale utente
Phonak
Phonak SoundPilot2 Manuale utente
Phonak
Phonak Q90 Manuale utente
