Phorus PS1 Manuale utente
Phorus PS1 Speaker
Owner’s Manual
i
Table of Contents i
Safety Information - Warnings and Cautions 1
System Requirements 2
What’s Included 3
Overview 4
Holding And Charging Your Android Device 5
Setup 6
Standard Wi-Fi Setup - Steps 1-4 7
Standard Wi-Fi Setup - Steps 5-6 8
Standard Wi-Fi Setup - Steps 7-9 9
Wi-Fi Protected Setup (WPS) 10
Naming a PS1 Speaker 11
Wi-Fi 12
Wi-Fi - Fine Tuning Your System 13
Wi-Fi - Static IP Conguration 14
Bluetooth 15
Aux In 16
Settings 17
Factory Reset 18
Troubleshooting 19
Table of Contents
Safety Information - Warnings and Cautions 1
Safety Information - Warnings and Cautions
Common sense warnings about liquids, re, heat, and
small objects:
• Do not install near any heat sources, such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
• To reduce the risk of re or electric shock, do not expose
this product to rain or moisture. The product should not be
exposed to dripping or splashing.
• Do not let objects or liquids enter the product as they
may touch dangerous voltage points or short-out parts that
could result in a re or electric shock.
• Clean only with a dry cloth. Unplug this product from the
wall outlet before cleaning.
• Do not place any open ame sources, such as lighted
candles, on or near the product.
• Do not expose the product to excessive heat, including
direct sunlight or re and storage or use inside cars in
hot weather, where it can be exposed to temperatures in
excess of 140°F (60°C). Doing so may cause the power
supply to generate heat, rupture, or ignite. Using the
product in this manner may result in a loss of performance
and shortened life expectancy.
Things not to do with your power supply:
• This product is intended to be used only with the power
supply provided.
• The power supply must be used indoors only. It is neither
designed nor tested for use outdoors, in recreational
vehicles, or on boats.
• Do not step on, throw, or drop the product or power
supply or expose them to a strong shock.
• Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
• Unplug this apparatus during lightning storms to prevent
damage to this product.
• To prevent risk of re or electric shock, avoid overloading
wall outlets, extension cords, or integral convenience
receptacles.
Leave it to the professionals:
• Make no modications to the product or accessories.
Unauthorized alterations may compromise safety,
regulatory compliance, system performance, and will void
the warranty.
• Refer all servicing to qualied service personnel. Servicing
is required when the product has been damaged in any
way: such as power supply cord or plug is damaged; liquid
has been spilled or objects have fallen into the product; the
product has been exposed to rain or moisture, does not
operate normally, or has been dropped – Do not attempt to
service this product yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards.
If any of these have occurred please call Phorus to be
referred to an authorized service center near you.
The importance of this manual:
• Keep these instructions for future reference.
• Heed all warnings in this owner’s manual.
System Requirements 2
Here’s what you’ll need to connect your PS1
Speaker to your router:
1. An Android phone or tablet with at least
version 2.2 of the Android Operating System.
2. A Wi-Fi access point or router broadcasting
with 802.11g/n.*
3. The password for your wireless network.
System Requirements
Hide Password
********
Android 2.2 (or greater)
802.11g/n
Network Password
*An 802.11b router may be used, but it will effectively
stream to only one Play-Fi device.
What’s Included 3
Thank you for purchasing a PS1 Speaker!
You’re about to enjoy an unparalleled, rich audio
experience directly from your Android phone
or tablet. Your system includes the following
components.
• PS1 Speaker
• USB-to-Mini USB charging cable
• USB-to-Micro USB charging cable
• Power Adapter
• Quick Start Guide
What’s Included
Overview 4
This is your PS1 Speaker. It’s going to be a big
part of your life, so let’s get you introduced.
Front
Power Button
Volume Up Button
Volume Down Button
Mute: Press both Volume Up and Down
Bluetooth Setup Button
Wi-Fi Setup Button
Back
Reset Button
Power Port
Factory Port (do not use)
USB Port (for Android device charging)
Aux In
Overview
Holding And Charging Your Android Device 5
Your PS1 Speaker is designed to hold a wide
variety of Android phones and tablets in
landscape or portrait orientation.
Your PS1 Speaker comes with two USB cables
for charging your Android phone or tablet. Both
USB cables are specially designed for charging
only. They cannot be used to transfer data.
If your Android’s charging jack is located at the
bottom of the device the Android should be
placed in the holder in its landscape orientation.
Holding And Charging Your Android Device
Phone (landscape)
Charging
Mini USB
Tablet (portrait)
Micro USB
Setup 6
The PS1 Speaker streams music over your
existing Wi-Fi network. One great feature of
the PS1 Speaker is that it’s really simple to set
up. There are two methods for connecting PS1
Speakers to your home network. You can perform
the Standard Wi-Fi Setup or WPS. Standard Wi-
Fi Setup lets you set up multiple PS1 Speakers at
once. WPS is very easy to perform, but only lets
you set up one PS1 Speaker at a time.
We’ll learn about the Standard Wi-Fi Setup rst,
since not every router is capable of WPS.
Setup
Setup 7
Before starting, make sure the system
requirements are met and that you have all the
components from the What’s Included section.
1. For best results place your PS1 Speaker(s)
near your router. You may move speaker(s) after
setup is complete.
2. Plug-in your PS1 Speaker(s) and a tone will
sound. Your Speaker will automatically power on.
The Wi-Fi light will blink quickly while the Speaker
is starting up.
3. Wait until the white Wi-Fi light goes from a fast
blink to a slow pulse. When it’s pulsing it is in
Wi-Fi Setup Mode and broadcasting to the world,
“I’m looking for Android devices!”
4. Connect your Android phone or tablet to the
same Wi-Fi network that you want to connect
your PS1 Speaker(s). Download and install the
free Play-Fi App from the Google Play Store or
the Amazon App Store.
- Continued on next page
Standard Wi-Fi Setup - Steps 1-4
Setup 8
5. Launch the Play-Fi App and it will detect any
PS1 Speakers in Standard Wi-Fi Setup Mode.
6. The Play-Fi App will ask you to enter your
Wi-Fi network’s password (if required). After
connecting, your PS1 Speaker may perform a
software update. This may take several minutes.
Do not unplug your Speaker, turn off your Android
device, or leave the network during the update.
- Continued on next page
Standard Wi-Fi Setup - Steps 5-6
Manually Enabling the Speaker’s Wi-Fi Setup Mode
If this is not your rst time setting up, if you’re in a new
location, or if you want to change from one network
to another, hold down the Wi-Fi button on the PS1
Speaker for 8 seconds. You will hear one chime and
then a second chime. When you hear the second
chime release the button. The Wi-Fi light will begin
pulsing indicating that Wi-Fi Setup Mode is active.
Alternative Network
If you want to set up a PS1 Speaker to connect to a
network other than the one you’re currently connected
to, press the Alternative Network button on the Enter
Network Password screen.
Indice
