• Exercise common sense while operating the Pico.
• Always use the keg cozy to shield the hot metal of the keg.
• Close supervision is needed when used around children.
• Allow machine to fully cool before removing or replacing parts.
• Do not operate with a frayed cord or broken plug.
• Do not remove Step Filter from the Pico unless in pause
mode or brew cycle is completed.
• The Step Filter and contents may be hot when
removing from the machine.
• Do not immerse or soak the machine.
• Make sure all hoses are connected properly
before starting a brewing, rinse, or cleaning cycle.
• To avoid risk of electrical shock hazard do not disassemble
the Pico. There are no user serviceable parts inside.
• Various surfaces can get extremely hot during the
brewing cycle, use caution when handling the keg,
hoses and components.
• Do not remove the hose clamps, hot liquid spray may result.
• Do not remove the keg attachments while brewing.
• The product is intended for household use only.
• The appliance is not to be used, or played with, by children.
• The appliance is not be to be used by persons with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction.
• If the power supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in
order to avoid a hazard.
• Per FCC 15.19(a)(3) and (a)(4)This device complies with Part 15 of
the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
• Per FCC 15.21 Change or Modifications that are not expressly
approved by the manufacturer could void the user’s authority to
operate the equipment.
• Per RSS-Gen, Section 8.4This device complies with Industry Canada
license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may
cause undesired operation of the device.
• Par RSS-Gen, Section 8.4 Cet appareil est conforme à Industrie
Canada exempts de licence standard(s) RSS. Le fonctionnement est
soumis aux deux conditions suivantes: (1) ce dispositif ne peut pas
provoquer d'interférences et (2) cet appareil doit accepter toute
interférence, y compris les interférences qui peuvent causer un
mauvais fonctionnement de l'appareil.
