PICZO NOVA Pro Manuale utente

USER MANUAL

Model: NOVA Pro

1FCC Compliance Statement.....................................................................................................3 
1 FCC Requirement .......................................................................................................................3 
2Disposal and Recycling Information.......................................................................................4 
3Precautions................................................................................................................................4 
4Package Contents .....................................................................................................................5 
1 Projector......................................................................................................................................6 
1.1 Touchpad.....................................................................................................................................7 
2 Remote........................................................................................................................................7 
5Basic Operations.......................................................................................................................8 
1 Charging......................................................................................................................................8 
2 Power ON....................................................................................................................................8 
3 Power OFF..................................................................................................................................8 
4 Auto Focus ..................................................................................................................................8 
5 Keystone Correction....................................................................................................................8 
6 Resizing Projection Screen.........................................................................................................9 
6User Interface ..........................................................................................................................10 
1 Home Screen ............................................................................................................................11 
2 Status Icons...............................................................................................................................12 
2.1 Status Icon: Battery...................................................................................................................12 
7Input Sources ..........................................................................................................................13 
1 Wireless Display........................................................................................................................13 
1.1 iOS/iPadOS...............................................................................................................................13 
1.2 macOS.......................................................................................................................................14 
1.3 Windows....................................................................................................................................14 
1.4 Android......................................................................................................................................14 
2 Wired: HDMI..............................................................................................................................15 
3 Wired: USB-C............................................................................................................................15 
4 Memory Device: microSD Card.................................................................................................15 
4.1 Inserting a microSD Card into the projector..............................................................................15 
4.2 Ejecting microSD Card..............................................................................................................15 
5 Memory Device: USB storage device .......................................................................................16 
8Product Maintenance..............................................................................................................17 
1 Projector....................................................................................................................................17 
2 Remote......................................................................................................................................17 
9Technical Specifications ........................................................................................................18 
Trademarks..............................................................................................................................19 
Regulatory Information...........................................................................................................19 

1 FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

1.1 FCC Requirement

Changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

•This device may not cause harmful interference, and

•This device must accept any interference received, including interference that may cause

undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

The end user must follow the specific operating instructions for satisfying RF exposure compliance.

This transmitter must not be co-located or operating in conjunction with any other antenna or

transmitter. The device is designed to meet the requirements for exposure to radio waves established

by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg

averaged over one gram of tissue. The highest SAR value reported under this standard during product

certification for use when properly worn on the body is 1.245 W/kg.

2 Disposal and Recycling Information

Damaged batteries should be treated as hazardous materials. Do not return the device if the battery is

swelling, leaking, or if you in any other way suspect that the battery is damaged. In this case, please

make sure you dispose of or recycle the item and its accessories according to local laws and

regulations. Do not puncture, drop or incinerate the battery.

3 Precautions

•To prevent electric shock, do not open the case. If needed, please ask your local retailer for

repair or replacement services.

•When operating the projector: do not look into the lens, as this may cause injury to the eyes.

•To prevent fire or electric shock, do not operate this product in wet or moist environments.

•When using the projector: avoid dropping and impact, as this may damage internal

components.

•Always use the included Power Adapter when charging the projector.

•Avoid keeping the Power Adapter plugged in to the projector when it is not in use, unless

charging is needed.

4 Package Contents

Projector

Mini Tripod

Power Adapter

Power Plug

(EU)

HDMI Cable

USB-C Cable

Remote Control

with Gyro

4.1 Projector

4.1.1 Touchpad

The touchpad is located on top of the projector.

How to operate the touchpad:

•Use one finger on the center of the touchpad to move the Mouse Pointer.

•Double tap with one finger to Confirm (OK).

•Use two fingers on the center of the touchpad to scroll up and down.

4.2 Remote

Please note:

•*Hold button to activate the Mouse Pointer. The remote control must be paired via Settings >

Remotes & Accessories before use of this function.

•Handle the remote control carefully. Dropping or jarring the remote can damage internal

components.

•Exposure to direct sunlight, smoke or steam can also harm internal components.

5 Basic Operations

5.1 Charging

The projector can be powered by the included Power Adapter or the internal rechargeable battery. To

obtain maximum battery life, it is highly suggested that you charge the battery for at least 4 hours the

first time.

1. Ensure the projector is turned off and connect it to the Power Adapter.

2. Connect the Power Adapter and the Power Plug (EU).

3. Insert the Power Plug (EU) into a wall outlet to charge the battery.

5.2 Power ON

Press and hold the ON/OFF button on the projector for 3 seconds to turn on the projector.

5.3 Power OFF

Press and hold the ON/OFF button on the projector for 3 seconds to turn off the projector.

5.4 Auto Focus

Auto Focus is enabled by default. This feature will auto focus the picture on the projected surface.

Navigate to Settings > Projector > Auto focus to enable/disable Auto Focus.

Please note:

•Ensure that you are projecting on a flat surface. Projecting on uneven surfaces might cause

the Auto Focus feature to produce bad results or fail completely.

5.5 Keystone Correction

Keystone Correction enables a skew projection of the output image. Navigate to Settings > Projector

> Four-point keystone to configure Keystone Correction.

5.6 Resizing Projection Screen

The projection screen size is related to the distance from the projector to the surface on which the

display is being projected onto, also known as throw distance. Please refer to the following table for

the relationship between throw distance and screen size:

Screen Size

Throw Distance

0.18 m

38"

1 m

56"

1.5 m

100"

2.5 m

200"

4.5 m

Please note:

•The measured values are estimated for reference only.

6 User Interface

Home Screen

Settings Menu

App Shortcuts

Indice

Altri manuali PICZO Proiettore

PICZO

PICZO IRIS Plus Manuale utente

Manuali Proiettore popolari di altre marche

iEmmet

iEmmet MP-312 Manuale utente

Epson

Epson VS400 Manuale utente

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuale utente

Sony

Sony VPL-HW65ES Manuale di servizio

Toshiba

Toshiba TLP-791U Manuale utente

Philips

Philips LC1341 Guida di riferimento

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuale utente

NEC

NEC NP600S EDU Manuale utente

BenQ

BenQ SH753P Manuale utente

Eiki

Eiki EK-623U series Manuale utente

Epson

Epson PowerLite Pro Cinema 6020UB Manuale utente

Epson

Epson PowerLite Home Cinema 705HD Manuale utente

Christie

Christie LHD700 Manuale utente

Navitar

Navitar FX Manuale utente

InFocus

InFocus LitePro 560 Manuale utente

Sony

Sony SRX-R815P Manuale utente

Vivitar

Vivitar DP1500 X Manuale utente

Acer

Acer C20 Series Manuale utente