Pioneer SPH-20DAB Manuale utente
English
SMARTPHONE RECEIVER
SPH-20DAB
Operation Manual
- 2 -
English
Getting Started ........................................................................................ 3
Digital Audio Broadcasting (DAB)..................................................... 11
Radio....................................................................................................... 12
USB/iPhone............................................................................................ 13
Bluetooth® ............................................................................................. 14
Using Pioneer Smart Sync/APP.......................................................... 17
Parking Sensor...................................................................................... 20
Settings .................................................................................................. 20
FUNCTION settings ............................................................................... 21
AUDIO settings ...................................................................................... 23
SYSTEM settings .................................................................................... 24
ILLUMINATION settings........................................................................ 26
P.SENSOR settings ................................................................................. 26
Additional Information ....................................................................... 27
About this manual:
•In the following instructions, a USB memory or USB audio player are referred to as
“USB device”.
•When an iPhone is connected to the unit, the source name on the unit appears as
[iPod]. Please note that this unit supports only iPhones (iPhone 5s or later) regardless
of the source name (page 30).
Table of Contents
- 3 -- 3 -
English
Frequently used operations
* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal,
the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the
source off.
Detach the front panel to prevent theft. Remove any cables and devices attached to the
front panel and turn off the unit before detaching it.
Getting Started
Basic operation
Purpose Operation
Turn on the power* Press to turn on the power.
Press and hold to turn off the power.
Adjust the volume Press / .
Select a source Press repeatedly.
Return to the previous display/list Press .
Return to the normal display from the menu Press and hold .
Answering a call Press any button.
Ending a call Press .
Detaching the front panel
Source (music)/Off Detach button
Display window
Smartphone holder
Phone
Message
Navigation
Voice recognition
USB port
Application launch
- 4 -
English
Important
•Avoid subjecting the front panel to excessive shock.
•Keep the front panel out of direct sunlight and high temperatures.
•Always store the detached front panel in a protective case or bag.
The microprocessor must be reset in the following situations:
– Before using this unit for the first time after installation
– If the unit fails to operate properly
– When strange or incorrect messages appear on the display
1Remove the front panel (page 3).
2Press the RESET button with a pointed instrument longer than 8 mm.
WARNING
•Detach the smartphone from the holder while driving under bad road conditions since the
smartphone may fall from the holder.
•Do not leave the smartphone attached onto the holder.
•Do not use the holder if you experience difficulty when attaching the smartphone onto the holder.
•Do not operate the holder or smartphone while driving.
•Be careful not to get your hands and fingers caught in the moving parts while operating the holder.
Resetting the microprocessor
Operating the smartphone holder
Detach Attach
RESET button
- 5 -- 5 -
English
•Do not attach the smartphone to the holder in a location where it may drop on the driver’s feet.
•Do not set the holder near the air conditioner vent.
•Make sure that nothing affects the operation of the air bags or vehicle operating systems, safety
feature or hazard lamps.
•PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR ANY DAMAGES CAUSED THROUGH USE
OF THE PRODUCT OR VEHICLE.
Removing the smartphone holder
1Detach the front panel (page 3).
2Pull out the holder by holding the anti slip portion on the edge of the holder until
the holder is completely visible.
CAUTION
Never pull up the holder until the holder is completely visible.
3Pull up the holder vertically.
CAUTION
Make sure that the line can be seen when the holder is pulled up vertically.
- 7 -- 7 -
English
Attaching the smartphone to the holder
CAUTION
•Depending on the shape of the smartphone, smartphone case or cover, it may not be attachable to
the holder.
•Be careful not to pinch your fingers in the holder.
Compatible smartphone size
H: 58 mm - 170 mm
W: 58 mm - 87 mm
D: 4 mm - 10 mm
Weight: under 0.25 kg
1Hook the smartphone on the upper arm and then push it into the lower arm.
2Slide the lower arms position to avoid hitting the lower arm and smartphone
buttons against each other.
- 8 -
English
NOTES
•Make sure that the smartphone is held properly on the holder.
•When the smartphone buttons come in contact with the upper or lower arms, adjust the
smartphone’s position or turn the smartphone upside down.
Adjusting the smartphone holder
Adjusting the holder angle
The holder angle range:
Downward 45° to upward 100°
WARNING
Do not set the holder where it may (i) interfere with vehicle panels or switches or (ii) impair the driver’s
performance.
Turning the smartphone holder from a horizontal to a vertical position
1Rotate the smartphone holder 90° clockwise.
- 9 -- 9 -
English
CAUTION
Be careful not to drop the smartphone when the smartphone is attached to the holder while rotating.
Turning the smartphone holder from a vertical to a horizontal position
1Rotate the smartphone holder 90° anticlockwise.
CAUTION
Be careful not to drop the smartphone when the smartphone is attached to the holder while rotating.
Detaching the smartphone from the holder
1Pull out the smartphone while pushing up the upper arm with the smartphone.
CAUTION
•Be careful not to drop the smartphone.
•Do not use the holder when the smartphone is detached.
- 10 -
English
Storing the smartphone holder
1Detach the front panel (page 3).
2Fold the holder horizontally.
3Push the holder completely into the unit.
4Attach the front panel to the unit (page 3).
1Press and hold until the unit turns off.
2Press and hold to display the main menu.
3Press to select [INITIAL], then press to confirm.
4Press to select an option, then press to confirm.
INITIAL settings
Altri manuali per SPH-20DAB
2
Indice
Altri manuali Pioneer Ricevitore
Pioneer
Pioneer MVH-350BT Manuale utente
Pioneer
Pioneer AVH-2300DVD Manuale utente
Pioneer
Pioneer VSX-D2011-S Manuale utente
Pioneer
Pioneer VSX-517-K Manuale utente
Pioneer
Pioneer VSX-920-K Manuale utente
Pioneer
Pioneer VSX-C550 Manuale utente
Pioneer
Pioneer AVH-3500NEX Manuale utente
Pioneer
Pioneer XV-DV505 Manuale utente
Pioneer
Pioneer VSX-531 Manuale utente
Pioneer
Pioneer VSX-830-K Manuale utente
Pioneer
Pioneer MVH-300EX Manuale utente
Pioneer
Pioneer VSX-821-K Manuale utente
Pioneer
Pioneer HTP-071 Manuale utente
Pioneer
Pioneer VSX-D511-K Manuale utente
Pioneer
Pioneer SC-07 - Elite AV Network Receiver Manuale utente
Pioneer
Pioneer Elite VSX-90TXV Manuale utente
Pioneer
Pioneer VSX-819H-K - AV Receiver - Gloss Manuale utente
Pioneer
Pioneer Elite VSX-70 Manuale utente
Pioneer
Pioneer Elite SC-05 Manuale utente
Pioneer
Pioneer VSX-1131 Guida all'installazione
