PiXORD P415M Manuale utente
PiXORD
Mega-Pixel IP Camera Series
P415M
User’s Manual
Version: 1.0
Date: 09/10/2008
1
WARINGS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
DO NOT INSERTANY METALLIC & ELETRIC CONDUCTIVE OBJECT THROUGH VENTILATION GRILLS.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED TO THEIR
RESPECTIVE COMPANIES.
2
CONTENTS
CHAPTER 1 PREFACE..................................................................................................................................................3
CHAPTER 2 PRODUCT SPECIFICATIONS...............................................................................................................4
CHAPTER 3 PRODUCT INSTALLATION..................................................................................................................6
1. MONITOR SETTING................................................................................................................................................6
2. HARDWARE INSTALLATION....................................................................................................................................7
3. IPASSIGNMENT.....................................................................................................................................................8
4. INSTALLACTIVEXCONTROL ...............................................................................................................................10
CHAPTER 4 LIVE VIDEO...........................................................................................................................................12
CHAPTER 5 IPCAMERA CONFIGURATION.........................................................................................................14
1. SYSTEM...............................................................................................................................................................14
2. NETWORK ...........................................................................................................................................................18
3. A/V SETTING.......................................................................................................................................................22
4. EVENT LIST.........................................................................................................................................................28
CHAPTER 6 NETWORK CONFIGURATION..........................................................................................................33
CHAPTER 7 FACTORY DEFAULT..........................................................................................................................35
APPENDIX A LIST OF COMPATIBLE SD ................................................................................................................36
3
Chapter 1
Preface
This IP camera is a high resolution Mega-Pixel IP Camera. It has the web server built in. User can view
real-time video via IE browser. It supports MPEG-4 & MJPEG video compression which provides smooth
and high video quality. The video can be stored in the SD card, and playback remotely. With user friendly
interface, it is an easy-to-use IP camera which is designed for security application.
4
Chapter 2
Product Specifications
zMegaPixel Resolution (SXGA)
zMPEG4/ MJPEG Compression Format
zSD Card backup
zSupports Cell phone/PDA/3GPP
zDual Streaming
zSDK for Software Integration
zFree Bundle 36 Channel Recording Software
Specifications
Hardware
CPU ARM 9 ,32 bit RISC
RAM 32MB
ROM 8MB
Image sensor 1/4” CMOS
Sensitivity 1.5 lux @ F1.4
Lens Type Vari-focal 3.7~12 mm lens
Power Consumption DC 12V, 0.2A
Operating Temperature -10℃~ 45℃
Dimensions 131.2mm (∅) x 94.3mm (H)
Weight 300g
Network
Ethernet 10/ 100 Base-T
Network Protocol HTTP, TCP/ IP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP,
3GPP, UPnP
System
Video Resolution 1280x1024, 640x480, 320x240, 160x120
Video adjust Brightness, Contrast, Exposure, Sharpness, AGC Night
Mode
Dual Streaming Yes
Image snapshot Yes
5
Full screen monitoring Yes
Compression format MPEG-4/ MJPEG
Video bitrate adjust CBR, VBR
Motion Detection Yes, 3 different areas
Triggered action Mail, FTP, Save to SD card
Pre/ Post alarm Yes, configurable
Security Password protection
Firmware upgrade HTTP mode, can be upgraded remotely
Simultaneous connection Up to 10
SD card management
Recording trigger Motion Detection, IP check, Network Status (Wire
connection only)
Video format AVI, JPEG
Video playback Yes
Delete files Yes
Web browsing requirement
OS Windows 2000, XP, 2003, IE 6 or above
Suggested Intel-C 2.0G, RAM：512MB, Graphic card：64MB
Hardware
Minimum Intel-C 1.6G, RAM：256MB, Graphic card：32MB
6
Chapter 3
Product Installation
1. Monitor Setting
I. Right-Click on the desktop. Select “ Properties”.
II. Change color quality to highest (32bit).
7
2. Hardware Installation
I. Connect power adaptor
II. Connect Ethernet cable
III. Connect IP Camera to PC or network
IV. Set up the network configurations according to the network environment. For further explanation,
please refer to chapter VI, “Network Configuration for IP CAMERA”.
8
3. IP Assignment
IP Installer is a utility that provides an easier, more efficient way to configure the IP address and network
settings of the network camera. It even provides a convenient way to set the network settings for
multiple devices simultaneously using the batch setting function. Moreover, IP Installer can save the
network settings for all devices as a backup and restore them when necessary.
zAlways consult your network administrator before assigning an IP address to your server in order to
avoid using a previously assigned IP address.
zEnsure the network camera is powered on and correctly connected to the network.
zMAC Address: Each network camera has a unique Ethernet address (MAC address) shown on the
sticker of the camera.
zOne final note, although the IP Installer is able to find and configure any network camera on the
LAN except those that are behind a router, it is a good idea to set the host PC to the same subnet.
In order to connect to the Web-based user interface of the network camera, the host PC must be in
the same subnet. For more information about subnets, please consult your network administrator.
1. Use the software, “IP Installer” to assign an IP address for the camera device. The software is
in the attached software CD.
2. Click “IP Installer” from the CD menu to start the installation.
3. Once IP Installer has been successfully installed on the computer, double click the IP Installer
icon on the desktop, or select it from Start > Programs > PiXORD Corporation > IP Installer >
IP Installer.
4. The IP Installer window is displayed below. Click the menu bar Tool > Search Network Device
to search the network camera in the LAN.
5. From the list, select the device with the MAC Address that corresponds to the device that is to
be configured.
6. Double click the item to open the Property Page dialog box for the selected device or click the
menu bar View > Property.
9
7. After filling in the properties, click [Synchronize] button to complete the configuration settings
and save in the network camera and PC immediately. If click [OK] button, the configuration is
only be saved in the PC.
8. To access the Web-based UI of the selected unit, run the View > Open Web on the menu bar.
9. If the device has been configured correctly, the default Web browser will open to the home
page of the selected device.
Indice
Altri manuali PiXORD Telecamera IP
