Planet ICA-510 Manuale utente

CCD PoE Internet Camera

ICA-510 / ICA-700

Quick Installation Guide

Table of Contents

Chapter 1. Introduction ................................................................... 3

1.1 Before Installation ............................................................... 3

Chapter 2. ICA-510 – Dual Mode CCD Dome IP Camera .................... 4

2.1 Package Content ................................................................. 4

2.2 Connectors.......................................................................... 4

2.3 Physical Installation ............................................................ 5

Chapter 3. ICA-700 CCD Box PoE IP Camera .................................... 8

3.1 Package Content ................................................................. 8

3.2 Rear Panel .......................................................................... 8

3.3 Physical Installation ............................................................. 9

Chapter 4. Setup Tool Installation and operation ..............................10

4.1 Setup Tool Installation ........................................................10

4.2 Setup Tool Operation ..........................................................14

Chapter 5. Cam Viewer Plus Installation ..........................................20

Appendix A: Feature Listing for Cam Viewer Plus..............................25

Appendix B: Suggest Hardware / System Requirement .....................26

Ordering Information for Cam Viewer Plus Pro............................27

Further Conguration................................................................27

Chapter 1. Introduction

Thank you for purchasing the IP surveillance product. It is versatile

and high image solution of the perfect surveillance application. The IP

surveillance state-of-art design is considerable to t in various network

environments.

1.1 Before Installation

Before installation, please be sure to read this quick installation guide

and user’s manual (CD) carefully to complete machine installation.

This QIG includes the following chapter:

• Chapter 2. ICA-510 – Dual Mode CCD Dome IP Camera

• Chapter 3. ICA-700 – CCD Box PoE IP Camera

• Chapter 4. Setup Tool Installation and operation

• Chapter 5. Cam Viewer Plus Installation

• Appendix A: Feature Listing for Cam Viewer Plus

• Appendix B: Suggest Hardware / System Requirement

Chapter 2. ICA-510 – Dual Mode CCD Dome IP

Camera

2.1 Package Content

ICA-510 x 1

Power Adapter x 1

Mounting Screws x 1

CD Disk x 1

Quick Installation Guide x 1

Note

1. If any of the above items are missing, please contact

your dealer immediately.

2. Using a power supply with a different voltage that the

one included with the package will cause damage and

void the warranty.

2.2 Connectors

AUDIO OUT (Green)

AUDIO IN (Red)

PWR

Video OUT

LAN (PoE)

Connector Description

AUDIO OUT An external speaker can be plugged in.

AUDIO IN An external microphone can be plugged in.

PWR

Connect the supplied power adapter (12VDC 1.0A).

When this camera is obtained power from PoE, you

don’t have to attach the power adapter to the ICA-

510.

Video OUT Analog video output.

LAN (PoE)

Connect your Camera to a 10/100Base-TX hub or

switch. It is compliant with IEEE 802.3af PoE. Either

mid-span PSE or end-span PSE supported.

2.3 Physical Installation

1. Hold the base and rotate the cover to open this camera.

2. Use the provided screws to mount the camera on the ceiling.

3. Attach the provided power adapter to the camera’s power connector.

If there is a PoE switch/hub existing, you can connect the ICA-

510 LAN port to your PoE switch/hub to power up. If this camera

is obtained power from PoE, you don’t have to attach the power

adapter.

Note

Please use the power adapter that is bundled in package.

Using a power supply with a different voltage rating will

damage and void the warranty for this product.

4. Set camera face to the location you want, and you can connect the

Video Out connector to a monitor then turn the lens to adjust focus.

5. When the position and focus adjustment done, rotate the housing

back to the main base and then turn the hemisphere cover to the

proper direction.

6. Connect ICA-510 LAN port to your network device, if it is not power

up from PoE switch/hub.

Chapter 3. ICA-700 CCD Box PoE IP Camera

3.1 Package Content

ICA-700 x 1

Power Adapter x 1

CD Disk x 1

Quick Installation Guide x 1

Camera Stand x 1

Note

1. if any of the above items are missing, please contact

your dealer immediately.

2. Using a power supply with a different voltage that the

one included with the package will cause damage and

void the warranty.

3.2 Rear Panel

Port Description

AUDIO IN An external microphone can be plugged in.

AUDIO OUT An external speaker can be plugged in.

RESET

Reset to manufacturer default valued and reboot.

When pressed and held over 10 seconds, the settings

of IP Camera will be set to the default values.

DC 12V

Connect the supplied power adapter.

When this device is obtaining power from PoE, you

don’t have to attach the power adapter.

LAN (PoE)

Connect your Camera to a 10/100Base-TX hub or

switch. It is compliant with IEEE 802.3af PoE. Either

mid-span PSE or end-span PSE supported.

3.3 Physical Installation

1.Connect an Ethernet cable

Connect one end of an Ethernet cable to the LAN port located on

the IP camera’s rear panel and connect the other end to the network

device (hub or switch).

2.Attach the external power supply

Attach the provided power adapter to the IP camera’s connector

labeled “DC 12V” on the rear panel. If this camera is obtained power

from PoE, you don’t have to attach the power adapter.

Note

Please use the power adapter that is bundled in package.

Using a power supply with a different voltage rating will

damage and void the warranty for this product.

3.Connect Microphone and Speaker

If you will use the 2-Way audio function, please connect microphone

to Audio In and speaker to Audio Out.

Chapter 4. Setup Tool Installation and

operation

This chapter shows how to quick set up your IP surveillance product.

The IP surveillance product is with the default settings. However to

help you nd the networked camera quickly the windows utility-Setup

Tool can search the cameras in the network that shall help you to

congure some basic setting before you started advanced management

and monitoring.

4.1 Setup Tool Installation

Note

In the installation steps below, this guide use ICA-510 as

the example. However, the steps for ICA-700 are similar.

Initial setup should be performed by using the supplied Windows-based

Setup Tool as follows:

1. Insert the bundled product CD into CD-ROM drive to launch the

autorun program.

2. Please click the IP camera model name.

3. When the web page displayed, select and click the “Setup Tool”

hyperlink on the menu to start the installation process.

Note

If the CD’s menu does not appear, click “Start” on the

task bar and select “Run” to type “X:\Utility\SetupTool\

SetupTool.exe”, assume X is your CD-ROM drive.

4. Click “Yes” to start the Setup Tool Installation.

Altri manuali per ICA-510

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Planet Telecamera IP

Planet

Planet ICA-HM136 Manuale utente

Planet

Planet ICA-M220 Manuale utente

Planet

Planet ICA- 5250 Manuale utente

Planet

Planet ICA-HM132 Manuale utente

Planet

Planet ICA-500 Manuale utente

Planet

Planet ICA-HM317 Manuale utente

Planet

Planet ICA-120 Manuale utente

Planet

Planet ICA-5250V Manuale utente

Planet

Planet ICA-100C Manuale utente

Planet

Planet CIA-3250V Manuale utente

Planet

Planet ICA-2250VT Manuale utente

Planet

Planet ICA-8000 Series Manuale utente

Planet

Planet ICA-HM120 Manuale utente

Planet

Planet ICA-HM100 Manuale utente

Planet

Planet ICA-107 Manuale utente

Planet

Planet ICA-310 Manuale utente

Planet

Planet ICA-HM132 Manuale utente

Planet

Planet ICA-HM125 Manuale utente

Planet

Planet ICA-312 Manuale utente

Planet

Planet ICA-151 Manuale utente

Planet

Planet ICA-8500 Manuale utente

Planet

Planet ICA-500 Manuale utente

Planet

Planet ICA-HM315W Manuale utente

Planet

Planet ICA-W7100 Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente