Planet GS-5220-16P2XV Manuale dell'operatore
L2+ 16-/24-Port Gigabit PoE
+ 2-/4-Port 10G SFP+ Managed Switch
with LCD Touch Screen
GS-5220-16P2XV(R)
GS-5220-16UP2XV(R)/GS-5220-16UPL2XV(R)
GS-5220-24P4XV(R)/GS-5220-24PL4XV(R)
GS-5220-24UP4XV(R)/GS-5220-24UPL4XV(R)
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Terminal Setup ........................................................................................... 5
4. Logon to Console........................................................................................ 6
5. ConguringIPAddress................................................................................ 7
6. Starting Web Management .......................................................................... 9
7. SavingConguration..................................................................................12
8. RecoveringBacktoDefaultConguration.....................................................13
9. LCD Touch Screen......................................................................................14
10. Customer Support.....................................................................................16
3
1. Package Contents
Thank you for purchasing PLANET L2+ 16-/24-Port Gigabit PoE + 2-/4-Port 10G
SFP+ManagedSwitchwithLCD.Thedescriptionofthismodelisshownbelow:
ModelName PoESupport 10GSFP+ PoEBudget PowerInput
GS-5220-16P2XV 16-port
802.3af/at 2300W
AC
GS-5220-16P2XVR AC/DC
GS-5220-16UP2XV
16-port
802.3af/at/bt 2
400W
AC
GS-5220-16UP2XVR AC/DC
GS-5220-16UPL2XV
600W
AC
GS-5220-16UPL2XVR AC/DC
ModelName PoESupport 10GSFP+ PoEBudget PowerInput
GS-5220-24P4XV
24-port
802.3af/at 4
400W
AC
GS-5220-24P4XVR AC/DC
GS-5220-24PL4XV
600W
AC
GS-5220-24PL4XVR AC/DC
GS-5220-24UP4XV
24-port
802.3af/at/bt 4
400W
AC
GS-5220-24UP4XVR AC/DC
GS-5220-24UPL4XV
600W
AC
GS-5220-24UPL4XVR AC/DC
“Managed PoE Switch” is used as an alternative name in this Quick Installation
Guide.
Open the box of the Managed PoE Switch and carefully unpack it. The box should
containthefollowingitems:
zTheManagedPoESwitch
zQuickInstallationGuide
zRJ45 to RS232 Cable
zRubber Feet
zTwoRack-mountingBracketswithAttachmentScrews
zPowerCord
zSFPDust-proofCaps
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
zWorkstations running Windows 10/XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerial Port Connection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
TheaboveWorkstationshavebeen installedwith terminal emulator,suchas
HyperTerminalincludedinWindowsXP/2003.
Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheconsoleportoftheManagedPoESwitch.
zEthernet Port Connection
Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser and JAVA runtime environment
plug-in.
Note
It is recommended to use Internet Explore 8.0 or above to access
the Managed PoE Switch. If the Web interface of the Managed PoE
Switch is not accessible, please turn off the anti-virus software or
firewallandthentryitagain.
5
3. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebookcomputerandtoRJ45typeofserialportoftheManagedPoESwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 3-1: Managed PoE Switch Console Connectivity
A terminal program is required to make the software connection to the Managed
PoESwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:115200
Databits:8
Parity:None
Stopbits:1
Flowcontrol:None
Figure 3-2: COM Port Conguration
6
4. Logon to Console
Once the terminal is connected to the device, power on the Managed PoE Switch,
and the terminal will display “running testing procedures”. Then, the following
message asks to log in user name and password. The factory default user name
andpasswordareshownasfollowsandtheloginscreeninFigure4-1appears.
Username:admin
Password:admin
Figure 4-1: Managed PoE Switch Console Login Screen
The user can now enter commands to manage the Managed PoE Switch. For a
detaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
7
5.ConguringIPAddress
TheManagedPoESwitchisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
Show the current IP Address
1.Atthe“#”prompt,enter“show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressasshowninFigure5-1.
Figure 5-1: IP Information Screen
Conguring IP Address
3.At the “#” prompt, enter the following command and press <Enter> as shown
inFigure5-2.
Switch# congure terminal
Switch(cong)# interface vlan 1
Switch(cong-if-vlan)# ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Managed PoE
Switch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Figure 5-2: Conguring IP Address Screen
8
4.Repeatstep1tocheckiftheIPaddresshaschanged.
Store current switch conguration
5.Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
#copyrunning-congstartup-cong
Figure 5-3: Saving Current Conguration Command Screen
If the IP is successfully congured, the Managed PoE Switch will apply the new IP
addresssetting immediately. Youcanaccess theWebinterface ofthe ManagedPoE
SwitchthroughthenewIPaddress.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.
9
6. Starting Web Management
The following shows how to start up the Web Management of the Managed
PoE Switch. Note the Managed PoE Switch is congured through an Ethernet
connection. Please make sure the manager PC must be set to the same IP subnet
address.
Forexample,thedefaultIPaddress oftheManagedPoESwitchis192.168.0.100,
then the manager PC should be set to 192.168.0.x (where x is a number
between1and254,except100),andthedefaultsubnetmaskis255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address:
192.168.0.100
Figure 6-1: IP Management Diagram
Logging in to the Managed PoE Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100(thefactorydefaultIPaddressortheonethatyouhave
justchangedinconsole)toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password “admin” (or the password you have changed via console). The login
screeninFigure6-2appears.
10
DefaultIPAddress:192.168.0.100
DefaultUsername:admin
DefaultPassword:admin
Figure 6-2: Login Screen
3.Afterenteringthepassword,themainscreenappearsasFigure6-3shows.
Figure 6-3: Web Main Screen of Managed PoE Switch
Questo manuale è adatto per i seguenti modelli
13
Indice
Altri manuali Planet Interruttore
Planet
Planet IKVM-8020 Manuale utente
Planet
Planet SGSW-24040 Manuale utente
Planet
Planet GSW-1602SF Manuale utente
Planet
Planet GSD-1222VHP Manuale utente
Planet
Planet IPOE-270 Manuale utente
Planet
Planet IGS-5225-4T2S Manuale utente
Planet
Planet GSD-1002M Manuale utente
Planet
Planet GSW-1601 Manuale utente
Planet
Planet IGS-5225-4T2S Manuale utente
Planet
Planet GSW-4804SF Manuale utente
Planet
Planet FGSD-1022 Manuale utente
Planet
Planet HPOE-460 Manuale utente
Planet
Planet WGSW-2620HP Manuale utente
Planet
Planet WH-2400M Manuale utente
Planet
Planet HPOE-460 Manuale utente
Planet
Planet FSD-1008HP Manuale utente
Planet
Planet FNSW-1600P Manuale utente
Planet
Planet IFGS-1022HPT Manuale utente
Planet
Planet IGS-1020TF Manuale utente
Planet
Planet IGSW-24040T Manuale utente
