Planet IGS-6325-20T4C4X Manuale utente
Industrial L3 20-Port 10/100/1000T +
4-Port Gigabit TP/SFP + 4-Port 10G SFP+
Managed Ethernet Switch
IGS-6325-20T4C4X
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Wiring DC Power Inputs .............................................................................. 5
4. Terminal Setup ........................................................................................... 6
4.1. Logging on to Console ......................................................................... 7
4.2. ConguringIPAddressviaConsole ....................................................... 8
5. Starting Web Management .........................................................................10
5.1 LoggingintotheIndustrialManagedSwitch.........................................10
5.2. SavingCongurationviaWeb ..............................................................13
6. RecoveringBacktoDefaultConguration.....................................................15
7. Customer Support .....................................................................................16
3
1. Package Contents
Thank you for purchasing PLANET Industrial L3 Managed Ethernet Switch.
“Industrial Managed Switch” is used as an alternative name in this Quick
InstallationGuide.
Open the box of the Industrial Managed Switch and carefully unpack it. The box
shouldcontainthefollowingitems:
zTheIndustrialManagedSwitch x1
zQuickInstallationGuide x1
zDB9toRJ45InterfaceRS232ConsoleCable x1
zRubber Feet x 4
zRackMountAccessoryKit x1
zACPowerCord x1
zSFP Dust Cap x 8
zRJ45DustCap x25
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
The Industrial Managed Switch provides remote login interface for management
purposes.Thefollowingequipmentisnecessaryforfurthermanagement:
zWorkstations running Windows 10/XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPProtocols.
zWorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
zSerialPortConnection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
The above Workstations have been installed with terminal emulator, such as
HyperTerminalincludedinWindowsXP/2003,puttyorTeraTerm.
Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheconsoleportoftheIndustrialManagedSwitch.
zEthernetPortConnection
Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser and JAVA runtime environment
plug-in.
Note
It is recommended to use Internet Explore 8.0 or above to access
the Industrial Managed Switch. If the Web interface of the Indus-
trialManagedSwitchisnot accessible,pleaseturnoff theanti-virus
softwareorfirewallandthentryitagain.
5
3. Wiring DC Power Inputs
The 6-contact terminal block connector on the panel of Industrial Managed Switch
isused for two DCredundant powers input. Please follow the steps below to insert
the power wires.
1.Insert positive/negative DC power wires into contacts 1 and 2 for DC POWER 1,
or5and6forDCPOWER2.
DI/DO
FaultR.O.
Ring
AC
DC 2
DC 1
42
31
100~240V AC
50/60 Hz
ON
AC POWER
OFF
DC POWER
ON
OFF
DC Input Range:
36V~60V
Fault
GNDGNDDO 1DO 0DI 1DI 0
DC 2DC 1
Figure 3-1 6-contact terminal block connector
2.Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
1 2 3 4 5 6
Power 1 Fault Power 2
+-+-
Figure 3-2 The pin of 6-contact terminal block connector
Note
The wire gauge for the terminal block should be in the range
between12and24AWG.
6
4. Terminal Setup
Tocongure the system,connecta serialcable toaCOMport onaPCor notebook
computerandtoRJ45typeofserialportoftheIndustrialManagedSwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1 Industrial Managed Switch Console Connectivity
A terminal program is required to make the software connection to the Industrial
ManagedSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:115200
Databits:8
Parity:None
Stopbits:1
Flowcontrol:None
Figure 4-2 COM Port Conguration
7
4.1. Logging on to Console
Once the terminal is connected to the device, power on the Industrial Managed
Switchandtheterminalwilldisplay“runningtestingprocedures”.
Then, the following message asks to log in user name and password. The factory
default user name and password are shown as follows and the login screen in
Figure4-3appears.
Username:admin
Password:admin
Figure 4-3: Industrial Managed Switch Console Login Screen
The user can now enter commands to manage the Industrial Managed Switch. For
adetaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new pass-
wordafterthisfirstsetup.
2.Only accept command in lowercase letter under console inter-
face.
8
4.2.ConguringIPAddressviaConsole
TheIndustrialManagedSwitchisshippedwithdefaultIPaddressshownbelow.
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
ShowthecurrentIPAddress
1.Atthe“#”prompt,enter“show ip interface brief”.
IGS-6325-20T4C4X#show ip interface brief
2.ThescreendisplaysthecurrentIPaddressasshowninFigure4-4.
Figure 4-4: IP Information Screen
ConguringIPAddress
3.At the “#” prompt, enter the following command and press <Enter> as shown
inFigure4-5.
IGS-6325-20T4C4X#congure terminal
IGS-6325-20T4C4X(cong)#interface vlan 1
IGS-6325-20T4C4X(cong-if-vlan)#ip address 192.168.1.100 255.255.255.0
The previous command would apply the following settings for the Industrial
ManagedSwitch.
IPAddress:192.168.1.100
SubnetMask:255.255.255.0
Figure 4-5: Conguring IP Address Screen
9
4.Repeatstep1tocheckiftheIPaddressischanged.
Storecurrentswitchconguration
5.Enterthefollowingcommandandpress<Enter>togobackto“#”prompt.
# exit
Figure 4-6: Inputting Exit Command Screen
6.Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
# copy running-cong startup-cong
Figure 4-7: Saving Current Conguration Command Screen
If the IP is successfully congured, the Industrial Managed Switch will apply the
new IP address setting immediately. You can access the Web interface of the
IndustrialManagedSwitchthroughthenewIPaddress.
Note
If you are not familiar with the console command or the related
parameter,enter “help” anytimein consoletogetthe helpdescrip-
tion.
10
5. Starting Web Management
The following shows how to start up the Web Management of the Industrial
Managed Switch. Note the Industrial Managed Switch is congured through an
Ethernet connection. Please make sure the manager PC must be set to the same
IP subnet address.
For example, the default IP address of the Industrial Managed Switch is
192.168.0.100, then the manager PC should be set to 192.168.0.x (where x
is a number between 1 and 254, except 100), and the default subnet mask is
255.255.255.0.
PC / Workstation
with Web Browser
192.168.0.x
Managed Switch
RJ45/UTP Cable
IP Address:
192.168.0.100
Figure 5-1: IP Management Diagram
5.1 Logging in to the Industrial Managed Switch
1.Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.0.100(thefactorydefaultIPaddressortheonethatyouhave
justchangedinconsole)toaccesstheWebinterface.
2.When the following dialog box appears, please enter the default user name and
password “admin” (or the password you have changed via console). The login
screeninFigure5-2appears.
Indice
Altri manuali Planet Interruttore
Planet
Planet IGS-5225-4T2S Manuale utente
Planet
Planet IGS-4215-4P4T Manuale utente
Planet
Planet FNSW-1601 Manuale utente
Planet
Planet SGSW-4802 Manuale utente
Planet
Planet FGSW-2022VHP Manuale utente
Planet
Planet PL-401E Manuale utente
Planet
Planet XGS-6350-12X8TR Manuale utente
Planet
Planet IGS-5225 Series Manuale utente
Planet
Planet POE-1200 Manuale utente
Planet
Planet GS-5220 Series Manuale utente
Planet
Planet IGS-4215-4P4T Manuale utente
Planet
Planet IGS-4215-16P2T2S Manuale utente
Planet
Planet WGSW-52040 Manuale utente
Planet
Planet FGSW-2620CS Manuale utente
Planet
Planet KVM-200 Manuale utente
Planet
Planet GS-5220-8P2T2S Manuale utente
Planet
Planet HPOE-1200G Manuale utente
Planet
Planet XGS3-24042 Manuale utente
Planet
Planet GS-5220 Series Manuale utente
Planet
Planet FSD-503 Manuale utente
