Planet ISW-511 Series Manuale utente
4-Port 10/100Mbps +1/2 100FX Fiber Port
Industrial Fast Ethernet Switch
ISW-511 / ISW-621 Series
ISW-511T / ISW-621T Series
User's Manual
Trademarks
Copyright © PLANET Technology Corp. 2015
Contents are subject to revision without prior notice
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work
properly in all environments and applications, and makes no warranty
and representation, either implied or expressed, with respect to
the quality, performance, merchantability, or tness for a particular
purpose.
PLANET has made every effort to ensure that this User’s Manual is
accurate; PLANET disclaims liability for any inaccuracies or omissions
that may have occurred.
Information in this User’s Manual is subject to change without notice
and does not represent a commitment on the part of PLANET. PLANET
assumes no responsibility for any inaccuracies that may be contained in
this User’s Manual. PLANET makes no commitment to update or keep
current the information in this User’s Manual, and reserves the right
to make improvements to this User’s Manual and/or to the products
described in this User’s Manual, at any time without notice.
If you nd information in this manual that is incorrect, misleading, or
incomplete, we would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the Instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may
cause radio interference, in which case the user may be required to
take adequate measures.
WEEE Warning
To avoid the potential effects on the environment and human
health as a result of the presence of hazardous substances
in electrical and electronic equipment, end users of electrical
and electronic equipment should understand the meaning of
the crossed-out wheeled bin symbol. Do not dispose of WEEE as
unsorted municipal waste and have to collect such WEEE separately.
Revision
PLANET 4-Port 10/100Mbps +1/2 100FX Industrial Fast Ethernet Switch
User’s Manual
For Models: ISW-511 / ISW-621 / ISW-511T / ISW-621T Series
Revision: 1.4 (April, 2015)
Part No: EM-ISW-511_621_v1.4 (2350-AH0150-003)
Table of Contents
1. Introduction .............................................................................. 6
1.1 Package Contents ................................................................ 6
1.2 How to Use This Manual....................................................... 6
1.3 Product Features ................................................................. 7
1.4 Product Specications .......................................................... 8
2. Installation ..............................................................................14
2.1 Product Description.............................................................14
2.1.1 Switch Front Panel ....................................................15
2.1.2 LED Indicators ..........................................................17
2.1.3 Switch Upper Panel ...................................................17
2.1.4 Wiring the Power Inputs ............................................18
2.1.5 Wiring the Fault Alarm Contact...................................19
2.2 Mounting Installation ..........................................................20
2.2.1 Install DIN-Rail Mounting ...........................................20
2.2.2 Wall Mount Plate Mounting .........................................22
3. Applications .............................................................................23
4. Switch Operation......................................................................27
4.1 Address Table.....................................................................27
4.2 Learning ............................................................................27
4.3 Forwarding & Filtering .........................................................27
4.4 Store-and-Forward..............................................................28
4.5 Auto-negotiation.................................................................28
5. Troubleshooting ........................................................................29
APPENDIX A: Networking Connection...............................................30
A.1 Switch’s RJ45 Pin Assignments ............................................30
A.2 RJ45 cable Pin Assignments ................................................31
6
1. Introduction
1.1 Package Contents
Check the contents of your package for the following parts:
zIndustrial Fast Ethernet Switch x 1
zUser's Manual x 1
zDIN Rail Kit x 1
zWall Mount Kit x 1
If any of these are missing or damaged, please contact your dealer
immediately. If possible, retain the carton including the original packing
material, and use them again to repack the product in case there is a
need to return it to us for repair
1.2 How to Use This Manual
This Industrial Fast Ethernet Switch User Manual is structured as
follows:
Chapter 2 Installation
The chapter explains the feature, functionality and the physical
installation of the Industrial Fast Ethernet Switch.
Chapter 3 Application
The chapter explains the Industrial Fast Ethernet Switch application.
Chapter 4 Switch operation
The chapter explains the Industrial Fast Ethernet Switch transmit
operation.
Chapter 5 Troubleshooting
The chapter explains the troubleshooting of the Industrial Fast Ethernet
Switch.
Appendix A
This chapter contains cable information of the Industrial Fast Ethernet
Switch.
7
1.3 Product Features
Physical Port
Model Name Ports Fiber Optical Interface
Copper Optical Mode Distance
ISW-511
4 x
10/100BASE-TX
1 x
100BASE-FX
Multi-mode 2km
ISW-511T
ISW-511S15 Single-
mode 15km
ISW-511TS15
ISW-621
2 x
100BASE-FX
Multi-mode 2km
ISW-621T
ISW-621S15 Single-
mode 15km
ISW-621TS15
ISW-621TF
Multi /
Single
Mode
depending
on SFP
Module
Layer 2 Features
Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX
Supports auto-negotiation and 10/100Mbps half / full duplex mode
for each copper port
High performance store and forward architecture, broadcast storm
control, runt/CRC ltering eliminates erroneous packets to optimize
the network bandwidth
Prevents packet loss with back pressure (half-duplex) and IEEE
802.3x pause frame ow control (full-duplex)
Backplane (switching fabric):
ISW-511 / ISW-511T Series: 1Gbps
ISW-621 / ISW-621T Series: 1.2Gbps
Integrated address look-up engine, supporting 2K absolute MAC
addresses
1Mbit on-chip frame buffer on ISW-511 / ISW-621 Series and ISW-
511T / ISW621T Series
Automatic address learning and address aging
CSMA/CD Protocol
8
Industrial Case / Installation
IP30 metal case
DIN rail and wall mount design
12 to 48V DC, redundant power with polarity reverse protect function
and connective removable terminal block for master and slave power
-10 to 60 degrees C operating temperature on ISW-511 / ISW-
511S15 / ISW-621 / ISW-621S15
-40 to 75 degrees C operating temperature on ISW-511T / ISW-
511TS15 / ISW-621T / ISW-621TS15 / ISW-621TF
1.4 Product Specications
Model ISW-511 ISW-511S15
Hardware Specications
Copper
Ports 4 x 10/100BASE-TX, auto-negotiation, auto-MDI/
MDI-X
Cable
10BASE-T : 2-pair UTP Cat. 3, 4, 5 cable (100
meters, max.)
100BASE-TX : 2-pair UTP Cat. 5, 5e, 6 cable
(100 meters, max.)
Fiber Optical
Port 1 x 100BASE-FX
Cable 50/125μm ber
62.5/125μm ber 9/125μm ber
Mode multi-mode single-mode
Distance 2km 15km
Dimensions (W x D x H) 135 x 97 x 32mm
Weight 436g
Power Requirements 12~48V DC, Redundant power with polarity
reverse protection function
Power Consumption /
Dissipation 9.1 watts / 31BTU
Installation DIN rail kit and wall mount ear
9
Switch Specications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Buffer 1Mbit
Flow Control Back pressure for half duplex,
IEEE 802.3x pause frame for full duplex
Switch Fabric 1Gbps
Throughput
(Packet Per Second) 0.74Mpps @ 64Bytes
Standards Conformance
Standards Compliance
IEEE 802.3 Ethernet, 10BASE-T
IEEE 802.3u Fast Ethernet, 100BASE-TX,
100BASE-FX
IEEE 802.3x full-duplex ow control
Stability testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Temperature Operating: -10~60 degrees C
Storage: -40~85 degrees C
Humidity Operating Operating: 5% to 90%, Storage: 5% to 90%
(non-condensing)
Regulation Compliance FCC Part 15 Class A, CE
Model ISW-511T ISW-511TS15
Hardware Specications
Copper
Ports 4 x 10/100BASE-TX, auto-negotiation,
auto-MDI/MDI-X
Cable
10BASE-T : 2-pair UTP Cat. 3, 4, 5 cable
(100 meters, max.)
100BASE-TX : 2-pair UTP Cat. 5, 5e, 6 cable
(100 meters, max.)
10
Fiber Optical
Port 1 x 100BASE-FX
Cable 50/125μm ber
62.5/125μm ber 9/125μm ber
Mode multi-mode single-mode
Distance 2km 15km
Dimensions (W x D x H) 135 x 97 x 32mm
Weight 436g
Power Requirements 12~48V DC, Redundant power with polarity
reverse protection function
Power Consumption /
Dissipation 13.7 watts / 46BTU
Installation DIN rail kit and wall mount ear
Switch Specications
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Buffer 1Mbit
Flow Control Back pressure for half duplex,
IEEE 802.3x pause frame for full duplex
Switch Fabric 1Gbps
Throughput
(Packet Per Second) 0.74Mpps @ 64Bytes
Standards Conformance
Standards Compliance
IEEE 802.3 Ethernet, 10BASE-T
IEEE 802.3u Fast Ethernet, 100BASE-TX,
100BASE-FX
IEEE 802.3x full-duplex ow control
Stability Testing
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Questo manuale è adatto per i seguenti modelli
12
Indice
Altri manuali Planet Interruttore
Planet
Planet GSW-2401 Manuale utente
Planet
Planet FGSW-2401 Manuale utente
Planet
Planet FGSW-4840S Manuale utente
Planet
Planet WGSW-5242 Manuale utente
Planet
Planet IGS-6325-16P4S Manuale utente
Planet
Planet IGSW-2840 Manuale utente
Planet
Planet FGSD-1011HP Manuale utente
Planet
Planet NOVASwitch FNSW-8086F Manuale utente
Planet
Planet IGS-5225-4T2S Manuale utente
Planet
Planet WGSW-24000 Manuale utente
Planet
Planet GSD-1002M Manuale utente
Planet
Planet FGSW-1820CS Manuale utente
Planet
Planet DH-1600 Manuale utente
Planet
Planet ISW-808PT-M12 Manuale utente
Planet
Planet LRP-822CS Manuale utente
Planet
Planet IGS-5225-4T2S Manuale utente
Planet
Planet FSD-503 Manuale utente
Planet
Planet IKVM-8020 Manuale utente
Planet
Planet KVM-201 Manuale utente
Planet
Planet GS-5220 Series Manuale utente
