Point Mobile PM451 Manuale utente
Quick Start Guide
V 1.0, Aug 2020
Copyright © 2020 Point Mobile Co., Ltd. All rights reserved.
Point Mobile Co., Ltd. is the designer and manufacturer of mobile handheld devices.
The Point Mobile logo is a registered trademark and symbol of Point Mobile Co., Ltd.
Features and specifications are subject to change without prior notice.
PM451
Device Parts
1
3
2
1. Front LED indicators
2. Display
3. Keypad
4. Microphone
5. I/O connector
6. Battery lock (Left)
7. Scan button (Left)
8. USB connector with cap
9. Center LED indicator (Left)
4
5
6
7
8
9
Device Parts
1
31. Scanner & Top Camera
2. Speaker
3. Gun handle connection part
4. Battery
5. Battery lock (Right)
6. Scan button (Right)
7. Center LED indicator (Right)
8. Power button
4
5
2
6
7
8
Product Standard Accessories
AC/DC power supply
Extended battery pack
(5,700mAh)
AC plug
USB type C cable
Stylus pen and tether
Handstrap
LCD protection film
Battey Replacement
Remove Battery
1. Press and hold left & right battery lock simultaneously
to release the battery
2. Pull the bottom of the battery up to remove the battery
Insert Battery
1. Insert the charged battery from the top first
2. Push down the bottom
(Make sure the battery is inserted firmly)
Install SIM, SD
PM451 supports micro SIM and microSD card. In order to
install the cards, remove the battery and follow below steps.
1. Grap the hole of card slot cover and pull it up using a
fingertip to open
2. Insert the micro SIM card and microSD card into proper
slot in the correct orientation (Refer to below figure)
SIM
SD
Turn on & off PM451
Turn on
Turn off
Press and hold the Power button on the right side of
PM451 until SMART BEYOND RUGGED logo displays
on the screen.
When the screen is on, press and hold the Power button
until the power menu is shown.
Then, tap Power off among the menu.
Charging the Device
1. Assemble the AC/DC power supply, country plug and
USB type C cable
2. Open the cap of the USB connector, and connect the
USB type C cable
3. Provide power by plugging the power supply to the
wall socket
< Caution >
1. Always use an original power supply from Point Mobile.
Other chargers and cables may damage the PM451.
The device warranty does not cover any damage caused by
the usage of non-original power supplies.
2. Make sure the charger and cable is not wet.
LED Indicator
1
32
No
Indicator
Status
Indication
1
Notification
LED
Solid
red
Entered
Hot swap mode
Blinking
blue
Notification
existing
2
Power
LED
Solid
green
Device
is completely charged
Solid
red
Charging
the device
/
Battery is low
Blinking
red
Charging
temperature is out of
normal
range
/
Battery is very low
Alternately
blinking
red
& green
Cannot
recognize the main battery
3
Center
LED
Solid
blue
Barcode
reading success
Solid
red
Barcode
reading failed
Scan a Barcode
Scanner is placed on the top of the PM451. Press the scan
button to scan a barcode.
Please aim the middle of the
barcode.
Even the aim point is slightly off-
center of tilted, you can read the
barcode.
If you aim the barcode wrong
direction or aim point is too tilted
to scan only the part of the
barcode, you can’t read the
barcode.
Certification
For More Information
Model: PM451
Trade name of certified: Point Mobile Co. Ltd.
Manufacturer: Point Mobile
For more certificate Information,
go Settings >About phone >Certificates
Download the user manual of PM451 from Point Mobile
homepage.
Please visit www.pointmobile.co.kr
Indice
Altri manuali Point Mobile Terminale touch
Point Mobile
Point Mobile PM80 Manuale utente
Point Mobile
Point Mobile HTK10 Manuale utente
Point Mobile
Point Mobile PM66 Manuale utente
Point Mobile
Point Mobile PM560 Manuale utente
Point Mobile
Point Mobile PM500 Manuale utente
Point Mobile
Point Mobile PM30 Manuale utente
Point Mobile
Point Mobile PM351 Manuale utente
Point Mobile
Point Mobile PM40 Manuale utente
Point Mobile
Point Mobile PM351 Manuale utente
Point Mobile
Point Mobile PM30 Manuale utente
