Polaroid iS426 Manuale utente
iS426
USER MANUAL
© 2013 All Rights Reserved.
Windows and the Windows logo are registered trademarks of Microsoft Corporation.
All other trademarks are the property of their respective companies.
2
Thank you for purchasing this digital camera. Everything you need to take quality digital photos
and videos is included with your digital camera.
Polaroid makes capturing those special moments as easy as possible.
Please read this manual carefully first in order to get the most out of your digital camera.
Note:
Your camera needs an SD Memory card (up to 32GB) for normal use.
SD Memory cards are not included and need to be purchased separately.
This camera is a Plug and Play device. You can download the pictures and videos captured
by your camera without the software by directly accessing the camera’s memory card from
your computer. It is recommended however that you install the Polaroid Instant Memories
Software to enjoy the full Polaroid experience.
1) Digital Camera
2) USB Cable
3) Polaroid Instant Memories
Software Installation CD
4) AC Charger
5) Wrist Strap
6) Lithium Battery
Note: SD Memory Card not included.
3
1. Power Button
11. INSTA Share / Down Button
2. Shutter Button
12. Scene / Left Button
3. LCD Screen
13. Flash Light
4. Busy/Charging LED Light Indicator
14. Wrist Strap Connector
5. USB Slot
15. Self-Timer LED Light Indicator
6. W/T Zoom Button
16. Battery Compartment / SD Card Slot
7. MODE Button
17. Tripod Mount
8. SET Button
18. Optical Lens
9. Flash / Up / Slide Show button
19. Microphone
10. Delete / Right Button
4
To Charge the Battery:
1. Insert the battery as shown above.
2. Power off the camera.
3. Connect the camera using the supplied
USB cable to the computer’s USB port or
to the AC Adapter (which is then
connected to a standard wall socket).
4. Allow the battery to charge for at least 3
hours before using the first time.
5. The charge light will turn off when the
battery is fully charged.
SD Memory card (up to 32GB)
needed for normal use.
5
When powering the camera ON for the first time the camera will take you through the initial
camera setup.
1) Charging the Battery
To charge your battery, first connect the USB Cable to your camera.
Then follow one of the steps below:
A) Charge the battery using the USB connection cable (included) and your computer:
- Connect one end of the USB cable into the USB port on your camera.
- Connect the other end of the USB cable to the USB port on your computer.
B) Charge the battery using the USB connection cable (included) and the AC Adapter
(included).
- Connect one end of the USB cable into the USB port on your camera.
- Connect the other end to the AC Adapter and then plug the AC Adapter into a power
socket.
Note: While charging the battery, the LED light turns on. The battery is fully charged when
the LED light turns off.
6
Battery Power:
Some features, will not work if the battery power level is low.
When the battery power is low the battery icon turns red and the camera will
automatically turn off a few seconds later.
The energy status of the power is displayed on LCD as shown below:
Full battery power Medium battery power Low battery power
2) SD Card
Make sure an SD card has been properly inserted into your camera. (SD card not included.)
To properly insert the SD Card:
Push the SD card into the slot in the direction shown on the camera (see SD icon by the
SD card slot).
Push the SD card until you hear a slight clicking sound. This indicates the SD card has
been inserted correctly.
Note:
After the camera is powered on, an SD icon will appear on the LCD display. If you do not
see the SD icon on the display, please check if the card was inserted properly.
Make sure the SD card is not locked (check the lock switch on the side of the SD card).
If the SD card is locked this will prevent the camera from saving captured photos to the
SD card.
3) Power On
Press the POWER button to turn on the camera.
After powering on your camera for the first time, you will be prompted to select a language for the
camera. The Language selection menu appears. Select the language of your choice by pressing
the UP and DOWN direction control buttons. Then press the SET button to confirm the selection.
7
Once a language has been selected, you will be asked if you would like to continue with the initial
camera setup. A message will appear: “Continue with Camera Setup?”
Select “Yes” to continue or “No” to exit the setup.
Note: If you select “No” and decide to leave the camera setup, the camera will be set to its default
settings. These settings can be adjusted at any time manually through the menus in the camera.
The next step in the initial camera setup is to set the date and time on the camera.
Set the Date and Time as desired by pressing the RIGHT and LEFT direction control buttons to
choose the specific setting and the UP and DOWN buttons to change each setting.
Once you have completed setting the time and date, press the SET button to confirm the
selection and finish the camera setup.
Next you will be asked to set the default INSTA Share destination for photos and videos taken
with your camera.
The INSTA Share technology allows you to quickly and easily upload your camera’s photos and
videos to social networks with the accompanying software application.
1) First you will be asked to choose the default INSTAShare social network for Photos.
Highlight the desired default social network and press the SET button to confirm the
selection.
2) Next you will be asked to choose the default INSTA Share social network for Videos.
Highlight the desired default social network and press the SET button to confirm the
selection.
Congratulations! Your camera is now ready to use.
8
Your camera has different modes for the various camera functions.
You can switch modes by pressing the MODE button on your camera after the camera has been
powered ON.
Use this mode to capture pictures with your camera.
This is the default mode when the camera is powered ON.
To take a picture, aim your camera as desired and press the Shutter button.
The picture is automatically saved to your camera’s memory card.
To access the various menus for the Photo Capture mode, press the SET button while in
the Photo Capture mode.
Use this mode to capture videos with your digital camera.
After turning on your camera, press the MODE button once to open the Video Capture
mode. To take a video, aim your camera as desired and press the Shutter button to start
the record. Ared record indicator will appear on the LCD screen while record is in progress.
To stop the record, press the Shutter button again. The video is automatically saved to your
camera’s memory card.
To access the various menus for the Video Capture mode, press the SET button while in the
Video Capture mode.
Use this mode to view and manage the photos and videos on your camera.
After turning on your camera, press the MODE button twice to open the Playback mode for
photos and videos. You can scroll through the photos and videos that you’ve previously
taken to view, edit or delete them as desired.
To access the various menus for the Playback mode for photos and videos, press the SET
button while in the Playback mode.
9
Image Sensor
CMOS Sensor
Image Resolution
4608x3456 (16M), 4416x3312 (14M), 4000x3000 (12M),
3648x2736 (10M), 3264x2448 (8M), 3648x2048 (7MHD),
2592x1944 (5M), 2048x1536 (3M), 1920x1080 (2MHD),
640x480 (VGA)
Video Resolution
1280x720 (720P), 640x480 (VGA), 320x240 (QVGA)
File Format
JPEG (Photo) /AVI (Video)
Internal Memory
1 Test Photo only
External Memory
SD MMC SDHC (up to 32G)–SD Card not included
LCD Display
2.4 Inch TFT LCD
Lens
f=6.0~12.8 , F3.0~4.5
Zoom
4X Optical Zoom ; 4X Digital Zoom
Exposure
-3.0EV ~ +3.0EV
White Balance
Auto, Daylight, Cloudy, Fluorescent, Incandescent
ISO
Auto, 100, 200, 400
Scene
Auto, Scenery, Portrait, Night Scenery, Night Portrait, High
Sensitivity, Beach
Flash
Auto, Forced On, Red Eye, Off
Self-Timer
2, 5 or 10 second delay
Anti-Shake
Yes
Face Detect
Yes
Print Photos
Yes
Macro
Yes
Auto Power Off
1, 3 or 5 minutes
Language
English, French, Spanish, Portuguese, German, Italian, Russian
Polish, Greek
Microphone
Yes
Interface
USB 2.0 (HS)
System Requirements
MICROSOFT Windows XP (SP 3), Vista (SP1) and Windows 7 or
higher; Mac OSX v10.5.x and above
Battery
Built-in Lithium Battery
Working Temperature
0~40C
Altri manuali Polaroid Macchina fotografica digitale
Polaroid
Polaroid PDC-5070BD - 5.0 MP Digital Camera Manuale utente
Polaroid
Polaroid ID100 Istruzioni operative
Polaroid
Polaroid I1037 - Digital Camera - Compact Manuale utente
Polaroid
Polaroid SMTP01 Manuale utente
Polaroid
Polaroid MP4 / MP4+ Camera System Manuale utente
Polaroid
Polaroid Land SX-70 Manuale utente
Polaroid
Polaroid PDC 330 Manuale utente
Polaroid
Polaroid ProCamCamera Manuale utente
Polaroid
Polaroid iD922 Manuale utente
Polaroid
Polaroid DMC Manuale utente
Polaroid
Polaroid 7100FF Manuale utente
Polaroid
Polaroid Macro 5 SLR Manuale utente
Polaroid
Polaroid Eye-Q Splash Manuale utente
Polaroid
Polaroid PDC 4355 Manuale utente
Polaroid
Polaroid Miniportrait 204 Istruzioni operative
Polaroid
Polaroid i1237 Manuale utente
Polaroid
Polaroid PDC-2000 Istruzioni operative
Polaroid
Polaroid REVUE 5005 Foglio di istruzioni
Polaroid
Polaroid 5/3 SLR1200 Manuale utente
Polaroid
Polaroid NOW Manuale utente
