Polycom SoundPoint IP 331 Manuale utente
Manual NDI Basic Phone
Polycom IP331
Datum : November 16th 2018
Versie : 2.2
Manual NDI Basic Phone
Page 2
Contents
1Phone Lay out........................................................................................................3
2Basic features.........................................................................................................5
2.1 Redial..............................................................................................................5
2.2 Hold button......................................................................................................5
2.3 Conference calls..............................................................................................5
2.4 Transfer...........................................................................................................5
2.5 Forward...........................................................................................................5
2.6 Call History......................................................................................................6
Manual NDI Basic Phone
Page 3
1 Phone Lay out
Features on a SoundPoint IP 32X/33X are:
1. Line Key 1 —Activate a line to start a call.
2. Line Key 2 —Activate a line to start a call. This key can also be used as a
speed Dial or Busy Lamp Field.
3. Display Control Keys —Use , , and (arrow buttons) to scroll
through menus or lists. Use to enter.
4. Hold —Put a caller on hold or to resume a conversation.
5. Headset —Switch a headset on or off.
6. Speaker –For handsfree calling
7. Microphone Mute —Switch the microphone on or off.
[Type
a
quote
from
the
docum
ent or
the
summa
ry of
an
interest
ing
point.
You
can
positio
n the
text
box
anywh
ere in
the
docum
ent.
Use
the
Text
Box
Tools
tab to
change
the
formatt
ing of
the pull
quote
text
box.]
Manual NDI Basic Phone
Page 4
8. Dial Pad —The key board of the phone.
9. Menu Key —Access to the menu.
10. Dial Key —With this key, you can start a call or access the call history list.
11. Soft Keys —These keys are automatically labeled to identify their context-
sensitive applications.
Manual NDI Basic Phone
Page 5
2 Basic features
2.1 Redial
A redial can be done by pressing the button.
2.2 Hold button
You can hold or resume a call by pressing the button or the soft keys “hold” or
“resume”.
When you have more than 1 call on hold you can switch between calls by using the
arrow keys: and .
2.3 Conference calls
Start a conference call:
Start a call from your phone. When the call is active you can press the soft key
“Conf”. The active call is put on hold. Press the number of the person you would
like to add and press the soft key “Dial”. When this second call is active, you
can press the soft key “Conf” again and the conference call is active with 3
parties. This action can be repeated to add more callers.
End a conference call:
To end a conference call, but not hang up the callers, press the soft key “Split”.
Both calls are put on hold and can be resumed separately.
To end a conference call, hang up or press the soft key “End call”.
2.4 Transfer
To transfer a call use the soft key “Trans” during an active call and press the number
you would like to call (internal or external) and finish with the “Dial” soft key. After
talking to the second party press “Trans” to complete the transfer.
2.5 Forward
To set up a forward press the button followed by option 1 and option 3.
3 different forwarding options are available. With the arrows you can scroll through the
menu and with the button you can select different options:
Always: all incoming calls will be directly forwarded to the configured number.
oTo enter a number, edit the “contact” field with the button.
oWith the << you can erase the number and then enter a new one
oPress the soft key “OK” and scroll down to the “Forward” field.
oPress to go down. You will now see the entry ‘Disabled’.
oPress the to select.
oPress to change the setting to ‘Enabled’.
Menu
Dial
Manual NDI Basic Phone
Page 6
oNow you will see the option: OK. Press the soft key ‘OK’ to confirm.
oPress the button and select ‘Yes’ to save
oPress the 2 times to leave the menu
No answer: This is often set by NDI for all phones, but it is possible to adjust it
per phone. To adjust, follow the steps as mentioned above. Also set the number
of rings in the “Forward After Rings” field
Busy: This is often set by NDI for all phones, but it is possible to adjust it per
phone. To adjust, follow the steps as mentioned above.
2.6 Call History
With the control keys you can see the call history of your phones:
Received calls: Press to see the list and press to scroll down.
Placed calls: Press to see the list and press to scroll down.
Speed Dials: Press to see the list and press to scroll down.
To dial a number press the
Exit: to exit a list press
Dial
Altri manuali per SoundPoint IP 331
24
Indice
Altri manuali Polycom Telefono IP
Polycom
Polycom SoundPoint IP 500 Manuale utente
Polycom
Polycom VVX 250 Manuale utente
Polycom
Polycom Soundpoint IP550 Manuale utente
Polycom
Polycom SoundPoint IP 335 Manuale utente
Polycom
Polycom VVX 400 Series Manuale utente
Polycom
Polycom SoundStation IP 6000 Manuale utente
Polycom
Polycom VVX 300 Manuale utente
Polycom
Polycom SoundPoint IP 450 Manuale utente
Polycom
Polycom SoundPoint IP 430 SIP Manuale utente
Polycom
Polycom SOUNDPOINT IP 600 SIP 1.6.X Manuale utente
Polycom
Polycom SoundPoint IP 670 Manuale utente
Polycom
Polycom SoundPoint 320 Manuale utente
Polycom
Polycom VVX 600 series Manuale utente
Polycom
Polycom SoundPoint IP 650 Manuale utente
Polycom
Polycom VVX-250 Series Istruzioni per il montaggio
Polycom
Polycom SoundPoint IP 550 Manuale di istruzioni
Polycom
Polycom 2200-12651-001 Manuale utente
Polycom
Polycom Integra VVX 500 Manuale utente
Polycom
Polycom SoundStation IP 3000 Manuale utente
Polycom
Polycom SoundPoint IP 3 Series Manuale utente
