POP UP IQ LIFT PRO 7 ACTIVE Manuale utente
PUSH-AROUND MOBILE ELEVATING WORK PLATFORM
SN: IQ24220001 - ONWARDS
IMMA200
REV.2
+44 (0)1244833 933info@popupproducts.co.uk popupproducts.co.uk
USE AND MAINTENANCE MANUAL
PRO 7ACTIVe
THIS PAGE WAS INTENTIONALLY LEFT BLANK
USE AND MAINTENANCE MANUAL
IQ LIFT PRO 7 ACTIVe
IMMA200
REV.22
TABLE OF CONTENTS
1. GENERAL INFORMATION 4
1.1 GENERAL DESCRIPTION OF THE MACHINE 4
1.2 USER’S RESPONSIBILITY 4
1.3 WARRANTY 4
1.4 AFTER SALES SERVICE 5
1.5 WHO IS THIS MANUAL FOR? 5
1.6 MACHINE IDENTIFICATION 6
1.7 PERSONAL PROTECTION EQUIPMENT REQUIRED 6
1.8 UKCA DECLARATION OF CONFORMITY 7
1.9 CONTENT OF THE MANUAL 7
1.10 INTENDED USE 7
1.11 ACOUSTIC AND SOUND PRESSURE 8
1.12 VIBRATIONS 8
2. MACHINE SPECIFICATIONS 9
3. SAFETY DOS AND DON’TS 10
4. DESCRIPTION OF MACHINE COMPONENTS 11
5. USING THE MACHINE 16
5.1 PRELIMINARY CHECKS 16
5.2 USING THE MACHINE 19
5.3 USING THE MACHINE WHEN ELEVATION IS LOCKED 20
5.3.1 ELEVATION LOCKED DUE TO EXCEEDING MAXIMUM LOAD CAPACITY 20
5.3.2 ELEVATION LOCKED DUE TO THE FAILURE OF THE STEEL WIRE ROPE 20
6. MAINTENANCE PROCEDURES 22
6.1 INSPECTIONS 22
6.1.1 DAILY INSPECTION 23
6.1.2 QUARTERLY INSPECTION 24
6.1.2.1 Quarterly inspection of the steel wire rope 24
6.1.2.2 Quarterly inspection on the retaining hook 29
6.1.3 SIX MONTHLY INSPECTION 29
6.2 CRITICAL COMPONENT REPLACEMENT SCHEDULE 31
7. TRANSPORTING, LOADING, MANOEUVRING AND STORAGE 32
7.1 TRANSPORT INSTRUCTIONS 32
5.4 EMERGENCY LOWERING PROCEDURE 21
USE AND MAINTENANCE MANUAL
IQ LIFT PRO 7 ACTIVe
IMMA200
REV.23
TABLE OF CONTENTS CONT.
7.2 LOADING 32
7.3 PUSHING AND TOWING THE MACHINE 33
7.4 STORING 33
34
8. DECALS
8.1 DECAL LOCATIONS
8.2 DECAL SYMBOL MEANINGS
34
35
USE AND MAINTENANCE MANUAL
IQ LIFT PRO 7 ACTIVe
IMMA200
REV.24
1. GENERAL INFORMATION
1.1 GENERAL DESCRIPTION OF THE MACHINE
IQ LIFT PRO 7 ACTIVE is a type 1 manual platform. This means that it can move only when the
elevating work platform is in a transport position.
IQ LIFT PRO 7 ACTIVE manual platform is designed and engineered by Gromet SRL to provide
maintenance operators with a safer alternative to ladders.
A mechanism with a gas spring and a mechanical reducer allows the operator to lift the machine
with the minimum effort through a hand-crank.
IQ LIFT PRO 7 ACTIVE is manually elevated by the operator and does not need batteries or charge
systems to work.
IQ LIFT PRO 7 ACTIVE can be used exclusively indoors, away from wind loading and on flat
flooring. It can be used in hospitals, food production plants, pharmaceutical plants, industrial
plants for maintenance purposes, construction sites, and for shopfitting.
This machine can be used for other applications if the operating parameters indicated in this
manual are adhered to.
1.2 USER’S RESPONSIBILITY
●The product described in this manual must be used by trained personnel who must attend a
course on works at height. Personnel must learn how to use, service and handle the machine
under safe conditions.
All trained operators must read this manual thoroughly and understand its content. Operators
must also know the occupational safety laws in force.
Personnel must be informed about safety issues and use Personal Protection Equipment (PPE) to
protect people, the machine and the surrounding environment.
Only using the machine correctly can ensure long-lasting, effective and safe operation.
All rights reserved. Translations, reprints and copies of this manual, even partially and/or in any
other form, must be authorised by POP UP Products Ltd.
●
●
●
●
1.3 WARRANTY
POP UP Products Ltd. issues a Warranty Certificate valid for 12 months from the invoice issue date.
The customer must thoroughly read the instructions in this technical manual and the conditions
indicated in the warranty certificate.
POP UP Products Ltd. undertakes to replace or repair, free of charge, every faulty part or component
that the end user believes it results from production or material defects within the warranty period,
except for the following cases:
●The telescopic upright is a sealed unit. The warranty becomes null and void if it is opened in any way.
●Defects resulting from negligence, improper use or unauthorised modifications.
●Damage resulting from improper use, a fall or failure to comply with transport, storage, installation,
loading or userinstructions.
USE AND MAINTENANCE MANUAL
IQ LIFT PRO 7 ACTIVe
IMMA200
REV.25
1. GENERAL INFORMATION
1.3 WARRANTY CONTINUED
●Any modification, addition or repair made by people other than the manufacturer or
authorised companies.
●Costs for shipping the platform to the manufacturer or authorised agents (and back) for
repairs or inspections following a compensation request for any machine or component.
●Material and labour costs for restoring, repairing or replacing worn components.
●Defects resulting from the use of non-standard or additional parts or damage or wear
resulting from the use or installation of such components.
1.4 AFTER-SALES SERVICE
After commissioning your IQ LIFT PRO 7 ACTIVE, you can contact POP UP Products Ltd.
after-sales service for:
●Problems during operation
●Supply of spare parts
●Inspections and repairs.
Please provide the following data (see also 1.6 Machine identification):
●Machine name
●Serial number
●Description of the problem and parts involved
1.5 WHO IS THIS MANUAL FOR?
This use and maintenance manual is for operators and service engineers who have been
authorised and trained for using and servicing the machine.
All users must read and understand this manual and comply with its instructions.
This manual specifies the tasks of each user.
USE AND MAINTENANCE MANUAL
IQ LIFT PRO 7 ACTIVe
IMMA200
REV.26
1. GENERAL INFORMATION
MANUFACTURER
ORIGIN
DESCRIPTION
MODEL
SERIAL NUMBER
BUILT (YYYY/MM)
MAX WIND (m/s)
MAX SLOPE
WEIGHT (kg)
MAX LOAD (kg)
GROMET SRL
MADE IN ITALY
MOBILE ELEVATING WORK PLATFORM
IQ LIFT PRO 7 FLY
IQ24220001
2022/05
0 (zero)
0 (zero)
274
125
NUMBER OF PEOPLE
1
Tenth Avenue, Deeside Industrial Park
Flintshire, CH5 2UA
+44 (0) 1244 833 933
www.popupproducts.co.uk
1.7 PERSONAL PROTECTION EQUIPMENT
REQUIRED The user should wear the following PPE:
1) Harness (Where applicable)
2) Safety shoes
3) Helmet
4) Gloves (Where applicable)
1.6 MACHINE IDENTIFICATION
These instructions refer to IQ LIFT PRO 7 ACTIVE, which carries the plate below with the
following data:
USE AND MAINTENANCE MANUAL
IQ LIFT PRO 7 ACTIVe
IMMA200
REV.27
1. GENERAL INFORMATION
1.8 UKCA DECLARATION OF CONFORMITY
This machinery fulfils all the relevant provisions of the Supply of Machinery (Safety) Regulations
2008 (SI 2008/1091) as amended (SI 2011/1043, SI 2011/2157 SI 2019/696)
,
BS EN 280:2013 + A1:2015
and BS EN ISO 12100:2010. A copy of the UKCA declaration of conformity can be found in the
document tube attached to the machine.
1.9 CONTENT OF THE MANUAL
This manual andattacheddocumentation provide:
●General information
●Safety information
●Description of the machine andoperation of its parts:
oDescription andcharacteristics
oTransportandinstallation
oOperation
●Maintenance andtroubleshooting
●Instructions for interruptingthe service,storing, disassemblinganddisposingof
the machine
●Listof the attacheddocumentation,such as diagrams,drawings and
documentation of the installedcomponents.
1.10 INTENDED USE
Liftingpeople andequipmentin closed, wind-free environments andon flatflooring.
Users musthave completedcourses on how to use MEWPs andwork atheight.
USE AND MAINTENANCE MANUAL
IQ LIFT PRO 7 ACTIVe
IMMA200
REV.28
1. GENERAL INFORMATION
1.11 ACOUSTIC AND SOUND PRESSURE
Declared noise emission value:
1.12 VIBRATIONS
Declared vibration emission value:
Referenced technical standards: UNI EN ISO 3744: 2010 and UNI EN ISO 11201: 2010
Manufacturer: Gromet S.r.L.
Type: Manual Platform
Model: IQ LIFT PRO 7 ACTIVE
Serial number: MA0120001
Year of manufacture: 2021
Operating conditions: Elevating and lowering the platform
DECLARED SOUND EMISSION VALUES
in accordance with UNI EN ISO 4871: 2009
78,0
4,0
75,0
4,0
Weighted sound power level A, Lwa (fif. 1 pW) in decibels
Uncertainty KwA, in decibels
Uncertainty KpA, in decibels
Weighted emission sound pressure level measured A, LpA (ref. 20
μPa) in the operator's position, in decibels
Referenced technical standards: UNI EN ISO 1032:2009 and UNI ISO 2361:2014
Manufacturer: Gromet S.r.L.
Type: Manual Platform
Model: IQ LIFT PRO 7 ACTIVE
Serial number: MA0120001
Year of manufacture: 2021
Operating conditions: Elevating and lowering the platform
DECLARED VIBRATORY EMISSION VALUES
in accordance with UNI EN I12096:1999
0,14
0,03
Vibratory emission value measured,aw in m/s2
Uncertainty K, in m/s2
USE AND MAINTENANCE MANUAL
IQ LIFT PRO 7 ACTIVe
IMMA200
REV.29
2. MACHINE SPECIFICATIONS
Working Height (maximum) 4.2m
Platform Height (maximum) 2.1m
Stowed Height 1.68m
Ground Clearance 15mm (min) to 85mm (max)
Overall Width 0.76 m
Overall Length 1.16m
Work Platform 0.71m x 0.58m
Guard Rail Height 1.1m
Toe Board Height 150mm
Platform Entrance 0.41m
Wheel Base 0.97m
Wheel Track 0.72m
Tyre Size (Solid, Non-Marking) - Front 205mm
Tyre Size (Solid, Non-Marking) - Rear 125mm
Rated Load
Lift Capacity 125kg (1 person + 45kg tools and materials)
Horizontal/Manual Force 200 N
Floor Loading
Machine Weight (Unloaded) (Approx.) 274kg
Maximum Wheel Pressure — Contact Point 3.07Mpa
Environmental limitations
Wind Indoor Use Only: 0 km/h
Rated Slope 0.0°
Temperature -20° C- to 40° C
Lift/Lower Speed 18 s / 20 s
Maximum number of lift cycles 150,000
The main specifications of the IQ LIFT PRO 7 ACTIVE can be found below:
Dimensions
Indice
Altri manuali POP UP Sistema di sollevamento
Manuali Sistema di sollevamento popolari di altre marche
Genie
Genie Z-60/34 Manuale utente
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuale utente
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuale utente
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuale di programmazione
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuale di programmazione
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuale di programmazione
