PosDelta T200C Manuale di istruzioni
Thermal Printer operating instruction manual
VERSION
May 2010
Copyright
This manual-based company's intellectual property without our permission, to
any section of this manual in any form, by any means, copied, or transmitted.
We are very careful finishing of this manual, but we can not guarantee the
contents of this manual entirely correct, because our products have been
continuously improved and updated, so I can not be amended at any time the
company reserves the right to promptly notify the user if necessary with the
product-related Further information can be linked with the dealer.
Precautions
1. The printer is installed in a solid place to avoid the printer on a
vibration and washing places.
2. Do not use of or storage printer,in heat and humidity and a serious
pollution of local.
3. The printer’s power adapter connect to a proper grounding outlet, to
avoid large-scale electrical or the other power supply voltage
fluctuations device cause to use the same socket
4.Avoid water or conductive material (for example: metal) into the printer
inside, the event should immediately turn off the power.
5.The printer can not print in paperless state, or it will seriously
undermine the printing roller and the thermal print head.
6. If you do not use the printer a long time, please disconnect the printer
power adapter power.
7. Users can not make bold to take down printer repair or remake.
8. The power adapter to use only the power adapter with random special
configuration.
9.In order to ensure print quality and product life, it is suggested to use
the recommended or equivalent quality thermal printing paper.
10. When plugged into the power connect cable or the data cable, please
make sure the printer power is turned off.
11.Please properly keep this manual，in order to use of reference
Application Area
Electronic Cash Register POS System Bill Print
Electronic Funds Transfer (EFT) POS Systems Bill Print
Sports, postal services, civil aviation ticket printing
Inquiries and service system for ticket printing
Measuring instrument information on printing
Tax, single-bill printing
Main Feature
Print high-quality, low cost
Low-noise, high-speed printing
Support cash drawer driving
Small and lightweight, beautiful shape
Easy paper loading structure, reasonable structure, easy to use
maintenance
Built-in data buffer (when printing can receive print data)
Character can enlarge print, Bold print, adjust character the line
spacing printed
Support of different densities bitmap and download of graphics
printing
Support for raster bitmap print
In the driver printing (mode), it implement and call the hard word
bank to high-speed printing
Low power consumption,Low operating costs (no ribbons, ink
cartridges)
Compatible ESC / POS print commands set, Each print characters
and font is optional (Adjust DIP switch )
Technical Parameters
Print method Line thermal
Print speed 160/230 mm / sec
Paper width 79.5 ±0.5 mm
Print Density 576 dot/line or 512 dot/line
Characters size ANK Character, Font A: 12*24dots, FontB: 9*14dots
Simplified/Traditional:24*24dots
Print Command Compatible ESC/POS Command
Interface Type Parallel Port/ Serial Port/ USB/Ethernet
Cutter Methods Full or Partial cut
Reliability 100KM
Barcode Type UPC-A/UC-E/JAN13(EAN13)/JAN8(EAN8)/CODE39/
ITF/CODABAR/CODE93/CODE128
Printing paper thick 0.06-0.08MM
AdapterVoltage Input AC 110V/220V，50-60Hz
AdapterVoltage output DC 12V/2.5A
Printer Input Voltage DC 12V/2.5A
Cashbox Control DC 12-24V/1A
WorkingTemperature 0-45℃， Humidity：10-80%
Saving Temperature -10-60℃, Humidity：10-90%
The printer of connecting
a、The power adapter cable connect to the printer power interface
b、The interface cable connect on the printer port behind
c、.The cash drawer connecting cable connect to the printer's behind the
cash drawer interface
Installation of paper roll
printers use the 80 mm thermal paper rolls, and use very easy to install of
paper's structure, very easy paper loading.
Installation of thermal paper method as follows:
a, in accordance with the direction the icon to open the printer cover.
b, in accordance with the direction the icon to install paper roll, and
note the direction of the paper.
c, In accordance with the direction icon to pulled a small piece
thermal paper out of the printer body external, and close the lid.
d, Closed the top lid, press and hold the middle part of printer lid, to
compaction the printer lid,In order to avoid the paper roll misplace,
and then tear the excess paper roll according to the icon.
Set print mode (DIP switch)
By DIP switch settings can change the printer cutter, language, speed,
beep, print concentration etc mode settings.
Installation of Printer Drive
1) insert the driver CD, in the menu click CD files to start in Install, and
click Next to continue installation, see the following icon:
2) Please read the terms of the software instructions, choose to accept
and continue the installation, see the following icon:
3) Select match your computer's operating system, click Next to
continue installation, see the following icon:
4) Select the appropriate drive name or the installation of the module,
click on the end of the installation, see the following icon:
Ethernet setting instructions
1, through the self-test to obtain the IP address of the machine
self testing the printer(press the “feed” on the printer, don’t move your
hand, and also open the power of the printer, 5 seconds, move your hand
off the “feed”, then the printer will print and get the IP address in the
paper
2, As the following icons to set network port
1) Determine the printer driver installed successfully, and click on the
printer driver, select "Properties", see the following icon:
2) Select the "Port", click “add port”, as shown:
3) choose ‘standar TCP/IP port’-------click “new port”, as shown:
Indice
Altri manuali PosDelta Stampante
