Power Electronics SD750 Series Manuale utente

SD750

ACCESSORIES

MANUAL

ANALOG I/O EXPANSION BOARD

LOW VOLTAGE VARIABLE SPEED DRIVE

Accessories Manual

Analog I/O expansion board

Edition: February 2020

SD75MA05AI Rev. A

SD750

POWER ELECTRONICS

ABOUT

ABOUT THIS MANUAL

PURPOSE

This manual contains important instructions for the installation, configuration and use of the optional

analogue input/output (I/O) expansion board for Power Electronics’SD750 variable speed drives.

TARGET AUDIENCE

This manual is intended for qualified customers who will install, operate and maintain Power Electronics

SD750 variable speed drives.

Only trained electricians may install and commission the drives.

REFERENCE MANUALS

The following reference documents are available for SD750 variable speed drives:

•Hardware and Installation Manual.

•Programming and Software Manual.

•Maintenance Manual.

•Pumps Application Manual.

POWER ELECTRONICS CONTACT INFORMATION

Power Electronics USA Inc.

4777 N 44th Ave

Phoenix

AZ 85031

UNITED STATES OF AMERICA

US Sales: 602-354-4890 / (480) 519-5977

Fax: (415) 874-3001

Power Electronics España, S.L.

Polígono Industrial Carrases

Ronda del Camp d’Aviació nº 4

46160, Llíria (Valencia)

SPAIN

Fax: (+34) 96 131 82 01

Website: www.power-electronics.com

POWER ELECTRONICS

SD750

REVISIONS

REVISIONS CONTROL

DATE

REVISION

DESCRIPTION

18/ 02 / 2020

First Edition.

The equipment and technical documentation are periodically updated. Power Electronics reserves the right to modify all or part of the

contents of this manual without previous notice. To consult the most updated information of this product, you may access our website

www.power-electronics.com, where the latest version of this manual can be downloaded. The reproduction or distribution of the present

manual is strictly forbidden unless express authorization from Power Electronics.

SD750

POWER ELECTRONICS

TABLE OF CONTENTS

ABOUT THIS MANUAL ...............................................................................................................................2

SAFETY SYMBOLS.....................................................................................................................................5

SAFETY INSTRUCTIONS............................................................................................................................6

INTRODUCTION.....................................................................................................................................7

Analog I/O expansion board specifications...........................................................................................8

LED indicators......................................................................................................................................8

CONNECTION TO THE DRIVE..............................................................................................................9

Connectors description.......................................................................................................................10

Connections Schema .........................................................................................................................11

COMMISSIONING ................................................................................................................................12

Parameters setting .............................................................................................................................13

Visualization parameters....................................................................................................................22

Summary of MODBUS addresses......................................................................................................24

FAULTS AND WARNINGS LIST..........................................................................................................28

Description of Fault list.......................................................................................................................28

Troubleshooting..................................................................................................................................28

List of Warning Messages..................................................................................................................28

POWER ELECTRONICS

SD750

SAFETY SYMBOLS

Always follow safety instructions to prevent accidents and potential hazards from occurring.

In this manual, safety messages are classified as follows:

Other symbols used in this manual for safety messages are the following:

WARNING

Identifies potentially hazardous situations where dangerous voltage may be

present, which if not avoided, could result in minor personal injury, serious

injury or death.

Be extremely careful and follow the instructions to avoid the risk of electrical

shocks.

CAUTION

Identifies potentially hazardous situations, which if not avoided, could result

in product damage, or minor or moderate personal injury.

Read the message and follow the instructions carefully.

NOTICE

Identifies important measures to take in order to prevent damage equipment

and warranty lost, as well as encouraging good use and environmental

practices.

Hot surface. Be careful and follow the instructions to avoid burns and personal injuries.

Risk of fire. Be careful and follow the instructions to prevent causing an unintentional fire.

Caution, risk of electric shock. Energy storage timed discharge. Wait for the indicated

time to avoid electrical hazards.

Caution, risk of hearing damage. Wear hearing protection.

SD750

POWER ELECTRONICS

SAFETY INSTRUCTIONS

IMPORTANT!

Read carefully this manual to maximize the performance of the product and to ensure its safe installation

and use.

In order to appropriately use the drive, please, follow all instructions described in the Hardware and

Installation Manual which refer to transportation, installation, electrical connection and commissioning of

the equipment.

For maintenance operations, follow the instructions from the Maintenance Manual.

Power Electronics accepts no responsibility for any damages resulting from incorrect use of equipment.

CAUTION

Read carefully the Hardware and Installation Manual, the Maintenance Manual and all documentation

related to the drive to guarantee its safe use and avoid the risk of personal injuries and damages to the

equipment.

Ensure compliance with local and national regulations of the installation site.

NOTICE

CAUTION IN CONNECTIONS

Use conductive paste between plates in every electrical connection. Otherwise, resistance will

increase and an overheat in the contact zone of the conductors may occur.

POWER ELECTRONICS

SD750

INTRODUCTION

SD750 drives are compatible with several optional boards:

•Communication boards (Ethernet/IP, Profinet, CANopen…).

•Encoder board.

•Digital and analog I/O expansion boards.

•Optical fiberboard

…among others. Up to three optional boards can be connected, maximum two of the same type.

This manual focuses on the optional analogue input/output (I/O) expansion board. This board allows

to increase the number of analog inputs and outputs compared to those of the SD750.

This board allows the drive to increase its inputs and outputs as follows:

•increases two analog inputs, configurable with the same behavior as the standard analog input.

•Increases two analog outputs, with the same behavior as the serial analog output.

The front of the analog I/O expansion board is shown below:

SD750

POWER ELECTRONICS

INTRODUCTION

Analog I/O expansion board specifications

•Device type: I/O expansion

•Form factor: Insert card.

•Type of wiring: Preferably shielded hose

LED indicators

The analog I/O board expansion board includes 1 led indicator (status) that provides information about

the operation of the card. See section "Connectors description and led indicators" for more information.

It is green and its frequency changes according to the operating state of the system. Its operation is

explained in the following table:

LED

COLOR / FREQUENCY

DESCRIPTION

STATUS

Green / slow blinking

The system is operating correctly 1.

Green / fast blinking

Test mode. The user has put the board in test mode, it is useful

to locate the board when there are several identical boards.

When we state that the system operates correctly, it means that the communication between the expansion board, the

network controller and the central SD750 microcontroller is correct. This does not mean, however, that the

communication with the PLC is correct.

Altri manuali per SD750 Series

Indice

Altri manuali Power Electronics Azionamento CC

Power Electronics

Power Electronics SD750 Series Manuale utente

Power Electronics

Power Electronics SD450 Series Manuale utente

Power Electronics

Power Electronics SD700SP Series Manuale utente

Power Electronics

Power Electronics SD 500 Series Manuale utente

Power Electronics

Power Electronics SD750 Series Manuale utente

Power Electronics

Power Electronics SD750 Series Manuale utente

Power Electronics

Power Electronics SD750 Series Manuale utente

Power Electronics

Power Electronics SD 300 Series Manuale elenco delle parti

Power Electronics

Power Electronics SD700 Series Istruzioni per l’uso

Power Electronics

Power Electronics SD 500 Series Manuale utente

Power Electronics

Power Electronics SD700 Series Manuale utente

Power Electronics

Power Electronics SD300312 Manuale utente

Power Electronics

Power Electronics SDRIVE 700 Series Manuale elenco delle parti

Power Electronics

Power Electronics SD750K Manuale utente

Power Electronics

Power Electronics B150 Series Manuale dell'operatore

Power Electronics

Power Electronics SD 500 Series Manuale utente

Power Electronics

Power Electronics XMV660 Series Manuale

Power Electronics

Power Electronics SD 500 Series Manuale elenco delle parti

Power Electronics

Power Electronics SD750 Series Manuale utente

Power Electronics

Power Electronics SD700 Series Manuale utente

Power Electronics

Power Electronics SD 300 Series Manuale utente

Power Electronics

Power Electronics VFD Manuale utente

Power Electronics

Power Electronics SD750 Series Manuale utente

Power Electronics

Power Electronics SD700 Series Manuale utente

Manuali Azionamento CC popolari di altre marche

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Manuale utente

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Manuale elenco delle parti

Chamberlain Garog

Chamberlain Garog D Series Manuale utente

Parker

Parker PDS Series Manuale utente

Festo

Festo DGC G Series Guida all'installazione

Binks

Binks QS-5012-1-CE Manuale utente

Danfoss

Danfoss VLT 2800 Series Scheda tecnica

ABB

ABB ACQ580-01 Series Manuale di installazione

YASKAWA

YASKAWA CANopen SI-S3 Manuale utente

GE D20A6 Manuale utente

Unex

Unex MC-D-250-1000-050W-TW Manuale utente

Geckodrive

Geckodrive G213V Manuale utente

ABB

ABB RSYC-01 Manuale utente

Rockwell Automation

Rockwell Automation PowerFlex 700S Manuale del proprietario

WEG

WEG DeviceNet CFW500 Manuale utente

Siemens

Siemens SINAMICS G Scheda tecnica

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Istruzioni operative

SOMFY

SOMFY JR RU 30 Manuale utente