Power Electronics GBC05CI Manuale utente
PASARELAETHERNET
ETHERNET - GATEWAY
Ethernet Gateway
Communication Network
Communication Network
Ethernet Gateway
Edition: April 2012
GBC05CI Rev. C
ETHERNET GATEWAY
POWER ELECTRONICS
2
POWER ELECTRONICS
ETHERNET GATEWAY
SAFETY SYMBOLS
3
E
N
G
L
I
S
H
SAFETY SYMBOLS
Always follow safety instructions to prevent accidents and potential hazards
from occurring.
Edition April 2012
This publication could present technical imprecision or misprints. The
information here included will be periodically modified and updated, and all
those modifications will be incorporated in later editions.
To consult the most updated information of this product you might access
through our website www.power-electronics.com where the latest version of
this manual can be downloaded.
Revisions
Date Revision Description
22 / 07 / 2010 A First edition
14 / 12 / 2011 B New equipment insertion
17 / 04 / 2012 C New equipment insertion
This symbol means improper operation may results in
serious personal injury or death.
Identifies shock hazards under certain conditions.
Particular attention should be given because dangerous
voltage may be present. Maintenance operation should be
done by qualified personnel.
ETHERNET GATEWAY
POWER ELECTRONICS
4
POWER ELECTRONICS
ETHERNET GATEWAY
INDEX
5
E
N
G
L
I
S
H
INDEX
SAFETY INSTRUCTIONS................................................................................6
1. INTRODUCTION.........................................................................................9
1.1. Ethernet Gateway ..........................................................................9
1.2. Types of Ethernet Networks.........................................................10
1.3. Ethernet Gateway Description.....................................................11
2. TECHNICAL CHARACTERISTICS..........................................................13
2.1. General Information .....................................................................13
2.2. Specifications of the Ethernet Gateway.......................................13
3. INSTALLATION AND CONNECTION......................................................14
3.1. Installation of Ethernet Gateway..................................................14
3.2. Description of Connectors and LEDs...........................................15
3.3. Connection for Equipments of Power Electronics .......................19
4. ETHERNET GATEWAY CONFIGURATION............................................30
4.1. Configuration Switch....................................................................30
4.2. Mode Selection ............................................................................30
4.3. MODBUS TCP/IP Configuration..................................................31
4.4. MODBUS RTU Configuration ......................................................32
4.5. Serial Slave Response Timeout...................................................33
4.6. Cache Polling Timeout.................................................................34
4.7. Cache Invalidation Timeout .........................................................34
4.8. Configuration Examples...............................................................34
5. WEB SERVER CONFIGURATION...........................................................40
ETHERNET GATEWAY
POWER ELECTRONICS
6
SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
IMPORTANT!
Safety instructions showed in this manual are useful to teach user
how to use the product in a correct and safety way with the
purpose of preventing possible personal injuries or property
damages.
Safety messages included here are classified as it follows:
WARNING
Be sure to take ESD (Electrostatic Discharge) protection measures when
you touch the board.
Otherwise, the optional board may get damaged due to static charges.
Implement wiring change on the optional board after checking that the
power supply is off.
Otherwise, there is a danger of connecting error and damage to the board.
Do not remove the cover except for periodic inspections or wiring, even if
the input power is not applied.
Otherwise, you may access the charged circuits and get an electric shock.
When connecting the gateway to the drive, wiring and periodic
inspections of both should be performed at least 10 minutes after
disconnecting the input power and after checking the DC Link voltage is
discharged with a meter (below 30VDC).
Otherwise, you may get an electric shock.
Operate the switches with dry hands.
Otherwise, you may get an electric shock.
Do not use cables with damaged insulation.
Otherwise, you may get an electric shock.
Do not subject the cables to the abrasions, excessive stress, heavy loads
or pinching.
Otherwise, you may get an electric shock.
POWER ELECTRONICS
ETHERNET GATEWAY
SAFETY INSTRUCTIONS
7
E
N
G
L
I
S
H
CAUTION
Do not allow lint, paper, wood chips, dust, metallic chips or other foreign
matter into the board or drive.
Otherwise, fire or accident could occur.
WARNINGS
RECEPTION
Material of Power Electronics is carefully tested and perfectly packed
before leaving the factory.
In case of transport damage, please ensure that you notify the
transport agency and POWER ELECTRONICS: 902 40 20 70
(International +34 96 136 65 57) or your nearest agent, within 24hrs
from receipt of the goods.
UNPACKING
Make sure received merchandise corresponds with delivery note,
models and serial numbers.
Each board is supplied with a technical manual.
RECYCLING
The packing of the drives and devices must be recycled. For this
reason it is necessary to separate different materials (plastics, paper,
cardboard, wood …) and settle them in corresponding containers.
The residual parts of electrical devices must be collected in a selective
manner in order to warranty the correct environmental treatment.
ETHERNET GATEWAY
POWER ELECTRONICS
8
SAFETY INSTRUCTIONS
SAFETY
Before operating the inverter, read this manual thoroughly to gain and
understanding of the unit. If any doubt exists then please contact
POWER ELECTRONICS, (902 40 20 70 / +34 96 136 65 57) or your
nearest agent.
Install the device according to the instructions within this manual.
Ensure that the mounting orientation is correct.
The Ethernet Gateway contains static sensitive printed circuits boards.
Use static safety procedures when handling these boards.
CONNECTION PRECAUTIONS
To ensure correct operation of the inverter it is recommended to use a
SCREENED CABLE for the control wiring.
Always check whether the DC Link LED is OFF before wiring
terminals. The charge capacitors may hold high-voltage even after the
input power is disconnected. Use caution to prevent the possibility of
personal injury.
COMMISSIONING
Follow the steps described in this manual.
Always apply voltage and current signals to each terminal that are
within levels indicated within this manual. Otherwise, damage to the
optional board may result.
Indice
Altri manuali Power Electronics Portale
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
