PowerPac PPC603 Manuale utente
ELECTRIC CLIP FAN WITH SILENT MOTOR
PPC603B (blue)
Parts & Description s
Fan
Blade
Motor Shaft
Joint
Main Body
Base Clip
Fan Head
Blade
Cap
Guard Mounting
Nut
Main Body screw
Warnings s
ATTENTION :
Read this booklet carefully as it contains important instructions for a safe installation,
use and maintenance.
Important instructions to be kept for future reference.
The following basic precautions should always be followed when using electrical
appliances:
1. Read all instructions before using the appliance.
The Appliance
2. This appliance must be used only for the purpose it was expressly designed; any
use NOT complying with the instructions contained in the manual is considered
inappropriate and dangerous. The manufacturer is NOT responsible for possible
damages caused by the inappropriate and/or unreasonable use.
3. The installation/assembly of the appliance will be made in accordance with the
indications of the manufacturer. A wrong procedure may cause damages to
persons, animals or objects, for which the manufacturer cannot be considered
responsible.
4. Before use, check the integrity of the appliance and power cable. DO NOT operate
the appliance when its Motor Unit or power cable is damaged. They must be
replaced by the manufacturer or its service agent, or a qualified technician in order
to avoid a shock hazard.
5. Before powering the appliance make sure the rating (voltage and frequency)
corresponding to the grid and the socket is suitable for the plug of the appliance,
and that the wall socket is properly grounded.
6. Avoid the use of adapters and/or extension cables if possible; if their use is
absolutely necessary, use only materials in compliance with the current safety
regulations and according to the electrical parameters of the adapters.
7. The appliance must NOT be switched on using external timers and/or other remote
control appliances which are not specified in this manual.
8. Only use original components & accessories provided by the manufacturer. Any
non-original component or accessory NOT recommended by the manufacturer
(including, but not limited to Fan Blade, Base, etc.) made by other manufacturers
or by the same manufacturer but for other models of the same capacity or
otherwise may cause injuries to persons or damage to the appliance.
9. The packing materials (plastic bags, expanded polystyrene, etc.) must be kept out
of the reach of children or disabled persons since they represent potential sources
of danger.
Location
10. This appliance is NOT suitable to be used or stored near heat sources (open flame,
ovens, heaters, stoves, etc.) and/or in an explosive environment (in the presence
of flammable substances such as gas, vapour, mist or dust, in atmospheric
conditions when, after ignition, the combustion is spread in the air). Items
containing these substances should never be placed in the appliance, and never
be used to clean the appliance in order to avert the risk of fire or explosion.
11. Place the appliance at a proper distance from the objects or surrounding walls
making sure that its functioning will NOT cause accidental damages. There should
be at least 10 cm of free space from the back, left & right sides, and at least 20 cm
the top of the appliance. Never put things on top of the appliance.
12. Avoid placing the power cable on abrasive or sharp surfaces or in positions where
it can be damaged easily. Avoid placing heavy objects on the cable. The cable
must NOT be placed under carpets, or covered with throw rugs, runners or similar.
Arrange the cable away from the high traffic area, and where it will NOT be tripped
over. DO NOT pull or carry the appliance by the cable.
13. DO NOT operate the appliance next to an open window while it is raining.
Rainwater splashing onto the appliance may cause an electric shock.
14. DO NOT use or store the appliance outdoors. Store and use the appliance only
indoors, or in any case, protected from weathering such as rain, direct radiation of
the sun and dust.
Operation
15. If you are using the appliance for the first time, you should:
a. Clean the exterior of the fan with a damp cloth. Make sure that the Motor Unit
DOES NOT come into contact with water.
b. Assemble the appliance fully and check that the Fan Blades are NOT damaged.
c. The appliance cab rest on its Base. The Base itself is in the form of a Clip,
which can grip onto any object. Clip the appliance to a stable and dry surface.
Damage may occur if the product is clipped on a movable, unstable, slippery
or wet surface.
d. To turn ON : Press the Power Button on the power cable. Rotate the Joint or
the Main Body screw to adjust the angle of the fan (upwards or downwards).
e. To turn OFF : Press the Power Button on the power cable.
f. Make sure to remove any label or protective sheet which may prevent its
proper functioning.
DO NOT:
cover the appliance during functioning;
attempt to force the fan blades to turn;
touch the fan blades while it is operating. The blades are rotating at very high
speeds, which may lead to injury to your fingers and hands;
push the Power Button too forcefully;
use the appliance near curtains or textiles;
use any of the following agents as a cleaner: gasoline, thinner, or benzene;
operate the appliance for more than 2 hours without turning it off for at least 20
minutes to let the appliance cool down for a total usage of 6 hours a day –
failure to heed this warning may result in motor failure;
leave the appliance unsupervised during operation.
16. During operation, DO NOT touch the appliance with wet body parts, and it is
recommended to have between you and the standing surface, an isolating element
(for example, wearing shoes with rubber soles).
17. DO NOT soak the Motor Unit in water or other liquids, wash it under the tap, or let
any liquid flow into the internal casing of the appliance to prevent electric shock.
In case of accidental fall in water, DO NOT try to take it out, but first switch the
appliance off.
18. Switch the appliance OFF before unplugging the appliance. Plug and unplug the
power cable firmly holding it with dry hands. Always unplug the power cable to
avoid overheating and if it is NOT used for a long period, before storing,
assembling & disassembling, cleaning or performing any maintenance operation.
Before storing, cleaning or performing any maintenance operation, leave to cool
for at least 30 minutes.
19. In case of malfunction or anomaly during the functioning, switch the appliance off
immediately, turn off the power and check the cause of the anomaly, if possible,
with the support of a qualified person.
20. If smoke is observed coming out of the appliance, switch the appliance off
immediately.
21. This appliance is NOT intended for commercial use but to be used in households
and similar applications, such as:
Staff kitchen areas in shops, offices and other working environments;
By clients in dormitories, hotels, motels and other residential environments;
Bed and breakfast type environments.
22. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
NOT play with the appliance. Cleaning and user maintenance shall NOT be made
by children unless they are older than 8 and supervised. Keep the appliance and
its cable out of reach of children less than 8 years old.
23. Save these instructions.
HOW TO ASSEMBLE & USE s
Warning: DO NOT operate the fan with any of its parts unassembled. The entire
assembled unit works as a single appliance. The fan must only operate in the upright
position. Any other position will be hazardous.
1. Unpack all parts from the package and place them on the floor.
2. Clean the exterior parts of the fan thoroughly with warm water & detergent with a
soft cloth.
3. Insert the Fan Blades into the blades slot. Check that the Fan Blades are NOT
damaged.
4. The appliance can rest on its Base or, since the Base itself is in the form of a Clip,
clip the appliance to a stable and dry surface. Damage may occur if the product is
clipped on a movable, unstable, slippery or wet surface.
5. The Base itself is in the form of a Clip, which can grip onto any object.
6. Insert the plug directly into a standard AC socket. Be sure that the plug fits tightly
into the socket.
7. To turn ON : Press the Power Button on the power cable.
8. To adjust the angle of the fan (upwards or downwards), adjust the Joint or the Main
Body screw.
9. To turn OFF : Press the Power Button on the power cable.
HOW TO CLEAN s
1. Switch the appliance OFF. Wait for the appliance to cool down completely.
2. Clean the exterior parts of the fan with warm water & dish-washing agent with a
soft cloth. Make sure that the Motor Unit DOES NOT come into contact with water.
Please exercise caution when cleaning around the grilles.
DO NOT use a scrubbing brush.
DO NOT use any of the following agents as a cleaner: gasoline, thinner, or
benzene.
3. Never run water over the appliance as malfunctions may occur if water seeps
inside the appliance.
4. Use a vacuum cleaner to suck up dirt from the Air Inlet and Air Outlet.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali PowerPac Fan
PowerPac
PowerPac PPFS818 Manuale utente
PowerPac
PowerPac PPFS70 Manuale utente
PowerPac
PowerPac PPUF223 Manuale utente
PowerPac
PowerPac PPTF290 Manuale utente
PowerPac
PowerPac PPFS212 Manuale utente
PowerPac
PowerPac iFan IF9669 Manuale utente
PowerPac
PowerPac PP2814 Manuale utente
PowerPac
PowerPac PP2809 Manuale utente
PowerPac
PowerPac PPTF460 Manuale utente
PowerPac
PowerPac PPTF303 Manuale utente
