PowerTrunk MDT-400 Manuale utente
User Manual
1en
TABLE OF CONTENTS
1DECLARATION OF CONFORMITY......................5
2GUARANTEE ........................................................5
3ABOUT THIS MANUAL.........................................6
4FOR YOUR SAFETY.............................................7
4.1 GENERAL............................................................7
4.2 EXPOSURE TO RF ENERGY .................................7
4.3 ELECTROMAGNETIC COMPATIBILITY.....................8
4.4 OTHER WARNINGS ..............................................9
4.5 ANTENNA..........................................................10
4.6 AUDIO ACCESSORIES........................................10
4.7 MAINTENANCE ..................................................11
5FIRST STEPS......................................................12
5.1 START-UP.........................................................12
5.2WORKING MODES. ............................................13
6BASIC USE..........................................................14
6.1 DISPLAY INDICATORS.......................................16
6.2 LED INDICATORS.............................................18
6.3 LIST OF EDITABLE CHARACTERS........................19
6.4 DT-410 DESKTOP UNIT......................................20
6.5 MAIN SCREEN ...................................................21
7MAIN MENU ........................................................21
8BASIC FUNCTIONS............................................26
8.1 GROUP CALLS.................................................26
8.2 INDIVIDUAL CALLS............................................28
8.3 STATUS MESSAGES .........................................30
8.4 TEXT MESSAGES .............................................31
9SPECIAL FUNCTIONS .......................................32
9.1 EMERGENCY CALLS .........................................32
9.2 WORKING MODES:DIRECT MODE.....................33
9.3 WORKING MODES:DMO-GATE MODE .............34
9.4 SECURITY........................................................35
9.5 NETWORK SELECTION......................................36
9.6 SUPPLEMENTARY SERVICES ............................37
9.7 DATA SERVICES...............................................38
9.8 GPS RECEIVER ...............................................38
9.9 GSM OPTION...................................................39
9.10 I/O PROGRAMMABLE OPTION.......................39
10 OTHER FUNCTIONS ..........................................42
10.1 CONTACTS PHONE BOOK.............................42
10.2 CALL HISTORY.............................................42
10.3 DISPLAY OPTIONS........................................42
10.4 LANGUAGES................................................43
10.5 AUDIO SETTINGS.........................................43
10.6 USING AUDIO ACCESSORIES ........................44
11 QUICK REFERENCE GUIDE..............................45
User Manual
2
en
User Manual
3en
WASTE MANAGEMENT
The symbol means that the product must be taken to separate collection at the
product end-of life. Do not dispose of these products as unsorted municipal waste.
NOTE:
PowerTrunk Inc. is the subsidiary of Teltronic S.A. Unipersonal responsible for
business development, distribution and customer support for Teltronic’s Land Mobile Radio
products in North America. The company is headquartered in New York City. Teltronic S.A.
Unipersonal distributes the same products for Land Mobile Radio under different trademarks
and brand names in other regions of the world.
Although an effort has been made in order to provide the most accurate information in
this document, it is possible than in some sections, diagrams or screenshots appear
references to the brand names and trademarks used in other regions. This should not be
construed as a commitment on the part of PowerTrunk Inc. and/or Teltronic S.A.U.
PowerTrunk Inc. and/or Teltronic S.A.U reserves the right to revise this documentation
and to make changes to its content at any time, without prior notification.
PowerTrunk, PowerTrunk-T and the PowerTrunk and PowerTrunk-T logos are
registered trademarks of Teltronic S.A. Unipersonal.
User Manual
4
en
This
equipment
can be used in member states
of the European Union once
the corresponding administrative
licence is obtained.
User Manual
5en
1DECLARATION OF CONFORMITY
PowerTrunk Inc., as manufacturer of the product MDT-400 / DT-410, declares that the said
product complies with the essential requirements established in article 3 of the Council of
Europe Directive 1999/5/CE, dated 9th March, 1999.
2GUARANTEE
POWERTRUNK INC. guarantees the replacement or repair, free of charge, of any products
that are found to have a manufacturing defect, in accordance with the general conditions of
the POWERTRUNK INC. guarantee.
Under no circumstance shall POWERTRUNK INC. be held responsible for problems or
damage caused by any accessory or auxiliary element that has not be supplied by or certified
by POWERTRUNK INC. Neither shall POWERTRUNK INC. guarantee the functioning of this
product with auxiliary equipment or accessories that have not been supplied or certified by
POWERTRUNK INC.
User Manual
6
en
3ABOUT THIS MANUAL
Welcome!
Thank you for purchasing this PowerTrunk MDT-400 or DT-410 device.
TETRA’s most advanced services and a wide range of options and accessories will help you
obtain the best performance from mobile communications in your work.
This manual will show you how easy it is to use the main features of your new TETRA
terminal. You will learn how to make a group call, an individual call, how to send status
message or how to edit a text message and send it to one or several users.
Before using the equipment, please read this manual carefully.
In addition to instructions on how to handle the device, you will
also find safety information, among which the
international guidelines on exposure to radio frequency.
Please keep this manual at hand for future reference.
For further information, contact your service provider.
At the end of this MDT-400 and DT-410 manual, you will find a Quick Reference Guide. In
addition, each unit is supplied with an Installation Guide.
User Manual
7en
4FOR YOUR SAFETY
4.1 General
PowerTrunk has obtained official approval for a wide range of accessories for MDT-400 and
DT-410 equipment: antennas, audio accessories, etc. These accessories have undergone all
type of tests to ensure their suitability and safety for the use they have been designed for,
either vehicle use (MDT-400) or desktop use (DT-410). We do not recommend the use of non-
homologated accessories.
For your safety, only have your equipment and accessories repaired by personnel authorised
by PowerTrunk. An incorrect installation (MDT-400 / DT-410 Installation Guide) or repair could
be dangerous and will render your guarantee void.
The equipment has been designed to fulfil the applicable compliance regulations.
The equipment complies with Part 15 of the FCC Title 47 of the Code of Federal Regulations.
Operation is subject to the condition that this device does not cause harmful interference.
The equipment complies with the applicable Part 90 of the FCC Title 47 of the Code of Federal
Regulations.
4.2 Exposure to RF energy
Your MDT-400 / DT-410 equipment, together with the accessories for which PowerTrunk has
obtained official approval, have been designed and manufactured so that they do not exceed
the limits of exposure to radio frequency energy established in international guidelines.
These guidelines, resulting from periodic scientific research by independent organisations,
have considerable safety margins to guarantee personal safety, regardless of the age or
health of the subject.
User Manual
8
en
MDT-400 / DT-410 is restricted to occupational/controller use to safety FCC RF
energy exposure limits. This radio is NOT authorized for general population.
Use only accessories and antennas approved by PowerTrunk. Use of non-approved
accessories and antennas may exceed FCC RF energy exposure limits.
4.3 Electromagnetic compatibility
Most electronic devices can suffer from electromagnetic interference unless they are
conveniently screened, designed or configured for electromagnetic compatibility.
To avoid these compatibility conflicts, it is necessary to respect current local regulations. This
equipment complies with the requirements of Council Directive 89/336/EEC on
electromagnetic compatibility, as well as Council Directive 95/54/CE regarding motor-vehicle
installations.
Vehicular Installation
The MDT-400 / DT-410 terminal must be supplied with a continuous
nominal 12V voltage in equipment terminals (minimum 10.8V,
maximum 15.6 V).
It must be taken into account that some mobile digital devices may interfere with hearing aids
or other medical devices. If this interference were to occur, please contact your service
provider or consult with the manufacturer of the hearing aid or medical device.
Using two TETRA devices with antennas in close proximity may cause mutual interference. If
this were to occur, separate the antennas until the interference disappears.
User Manual
9en
Warning: Burns may be suffered if the bare part of the antenna is
touched during radio equipment transmissions.
Long periods of transmission may cause the rear part of the
equipment, where the power amplifier radiator is located, to reach a
high temperature.
4.4 Other warnings
Vehicles
RF signals may affect motor vehicles’ electronic systems if they are not properly installed or
well protected. For more information, check these aspects of your vehicle or the equipment
you have added with their manufacturers.
MDT-400 equipment has been approved in conformity with Directive 95/54/CE to guarantee
safety in vehicle installations, due to radio equipment transmissions affecting the vehicle’s
electronic systems: electronic ignition systems, brake control (ABS), traction or speed control
and onboard computer systems.
For correct installation of the equipment, please follow the instructions given in the MDT-400 /
DT-410 Installation Guide. Avoid using the area above the airbag or the area where it will
inflate. Airbags inflate with great force and the equipment could be projected forward and
cause serious injuries to vehicle occupants.
Potentially explosive environments
Disconnect the equipment when you are in an area with a potential explosion hazard and
comply with all notices and instructions.
Areas with a risk of explosions are often (although not always) indicated. Amongst these are
fuel filling areas (Ship decks, petrol stations, installations used for storing and transporting fuel
or chemical products) vehicles that use LPG and areas where the air contains particles such
User Manual
10
en
as grain, powder or metal particles.
Sparks in these areas can cause explosions or fires, with the resulting risk of injury and even
death.
Driver safety
Check the laws and regulations on using mobile phones and radiotelephones in the area
where you are to drive and always abide by them. While driving, concentrate all your attention
on driving and always have your hands free to manoeuvre the vehicle.
As a precautionary measure, whenever possible, park off the road to make or receive a call.
Programming
The equipment must always be programmed using a version of the programmer that is
compatible with the version of firmware.
4.5 Antenna
1. Do not use the equipment without an antenna.
2. To guarantee safety compliance, always use antennas validated by PowerTrunk.
3. Never use the equipment if the antenna is damaged. If a damaged antenna comes into
contact with the skin, it may cause burns.
4.6 Audio accessories
1. Only use accessories approved by PowerTrunk.
2. Follow the guidelines for fitting audio accessories in the MDT-400 / DT-410 Installation
Guide.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali PowerTrunk Radio
