Pragma H-01 Manuale utente

USER MANUAL

TREKHY / PRAGMA H-01

FUEL CELL ELECTRIC GENERATOR

v2021-01-1.00EN

Table des matières

FUEL CELL ELECTRIC GENERATOR ........................................ 1

Original Trekhy / Pragma H-01 instructions ................................. 3

Contents of the box ................................................................ 4

Apparatus function ................................................................. 4

Technical data ......................................................................... 4

Safety instructions.................................................................. 5

STARTING PROCEDURE............................................................ 7

Step 1 - Connections .............................................................. 7

Step 2 - Preparation of the hydrogen reaction ..................... 8

Step 3 - Getting started........................................................... 9

Step 4 - Operation ................................................................. 10

Step 5 - System shutdown ................................................... 12

Step 6 - Draining the reactor ................................................ 13

Care and maintenance ............................................................... 14

Problems shooting / solving........................................................ 14

Disposal...................................................................................... 16

Original Trekhy / Pragma H-01 instructions

1- Electric generator

2- USB plug 5V x2

3- Cigarette lighter sockets 12V x2

4- Air inlet / outlet

5- Grip handle

6- Reactor fan female socket

7- Hydrogen female connector

8- LED indicators

9- Green LED indicator

10- Red LED indicator

11- Hydrogen reactor

12- Reactor cap

13- Reactor fan male plug

14- Hydrogen male connector

15- Reactor fan

16- Reactor holder

17- Reactive powder bag

18- Water measuring glass

19- Purge port

Read the instructions carefully before use and keep them in

safe place for future reference.

Contents of the box

•Fuel cell electric generator

•Hydrogen production reactor

•Connection pipe between the reactor and the generator

•Water measuring glass

•USB charging cable

•Quick Start Guide

Apparatus function

This apparatus is intended for the power supply of small electronic equipment

or for recharging batteries through USB 5V or 12V "cigarette lighter" sockets.

This product is designed for indoor or outdoor use within the limits of its specifi-

cations.

Technical data

Dimensions

7.5x10.4x10.5 inches (W.D.H)

Weight

8.16 Lbs

USB power sockets x2

USB-A 5V – 2,4 Amp

Cigarette lighter sockets x2

ISO4165 12V – 2,5 Amp

Operating temperature range

32°F ... +113°F

Guaranteed continuous electric power*

30 Watts

Peak electrical power

60 Watts during 1 seconds

Operating time of one bag*

1 hour

Reactor water volume

7.77 oz

* In operation, the available electrical power may vary between 30W and 45W.

Safety instructions

Before using this device, please read this user manual carefully and keep it for

future use.

If you pass this device on to someone else, also pass this manual to them.

•Use this device as described in this manual. Any mishandling and any con-

trary use to these instructions will in no way engage the responsibility of the

manufacturer.

•There is a risk of injury from improper use.

•Failure to follow the safety and operating instructions may cause electric

shock, fire and / or injury to persons.

•Use only parts / spares recommended by the manufacturer; other parts /

spares can damage the device and / or cause injury.

•This device may be used by children 12 years of age or older, provided they

are supervised or have been instructed in the safe use of the device and

that they understand the dangers involved. Cleaning and maintenance shall

not be made by children unless they are over 12 years of age and under

adult supervision.

•This device may be used by persons with reduced/challenged physical, sen-

sory or mental capacities or whose experience or knowledge is insufficient,

provided that they are supervised or have received instructions on how to

use the device safely and understand the potential dangers.

•Children should not use the device as a toy.

•Keep the device and its accessories out of the reach of children under 12

years old.

•Install the device in a stable place / space

•Install this device in an upright position. Do not use the device if its orienta-

tion exceeds an angle of 10 degrees from the vertical position.

•Do not install the device near sources of naked flames, such as lighted can-

dles.

•Do not install the device:

oNear radiant heat devices (e.g. electric heaters)

oNear or on other equipment that produces a lot of heat

oIn places subject to constant vibrations

oIn places subject to bad weather that could allow foreign bodies (dust,

sand, water, etc.) to enter through the vents and openings of the device

oDirectly on soft ground (sand, snow) which could block the ventilation

of the device.

•The device is designed to withstand water projections directed downwards,

verticals up to an angle of 45 degrees. Do not expose the device to an im-

mediate environment exceeding these conditions of use.

•Do not immerse the device in water or any other liquid.

•Keep a minimum distance of 4 inches around the device for sufficient venti-

lation.

•Before use, check that the device and its accessories (in particular cables

and connecting elements) are not damaged. In the case of damage, do not

use the device and contact your dealer for any inspection or repair.

•Never intentionally open a reactive powder bag. The powder reacts in the

presence of water and the direct contact of the powder with water produces

significant heat. In the case of a torn and unused reactive powder bag, set it

aside in a dry, heat-resistant place. Never use a torn reactive power bag

with the device.

•Do not disassemble the device yourself. All disassembly, repair and verifica-

tion must be carried out exclusively by a trained / qualified person. Always

check before use whether the tank is filled to appropriate level with water.

•If the device is used with an inadequate water level, it may damage the de-

vice and render it unusable.

•The reaction to produce hydrogen also produces heat. The heating of the

reactor is normal. The peak of heat is produced during the first 30 minutes

of the reaction. Do not open the reactor within 30 minutes of starting the

production hydrogen reaction. Wait for the reactor to cool before opening it.

•During use, some parts of the device may be hot. Do not touch the top of

the hydrogen reactor.

•The water in the reactor may be hot after use. Take the necessary precau-

tions when draining the reactor to avoid physical contact with hot water.

•The surfaces of the hydrogen reactor may be subjected to residual heat af-

ter use, until the device has completely cooled.

•Do not clean the device with cleaners, metal sponges or other abrasive ma-

terials.

•Do not clean the device with products containing solvents.

•This device is designed to be used exclusively with the reactive powder

bags intended for its use. The reactive powder bags are for single use.

•Keep these instructions.

STARTING PROCEDURE

Step 1 - Connections

1. Remove the white and blue plugs which re-

spectively protect the generator hydrogen sup-

ply socket (7) and the reactor fan power supply

socket (6).

- Pull on the white cap to extract it.

- Unscrew the blue cap turning counterclock-

wise

2. Connect the hydrogen supply pipe (14) to the

fitting in the center of the reactor cover (12).

The hose is connected by pushing it into its fit-

ting until it stops. To disconnect, push the ring

of the fitting back while pulling gently on the

pipe.

3. Connect the hydrogen supply pipe (14) to the

female connector of the generator (7). The

connection is of the "bayonet" type socket. It is

inserted vertically then locks by turning clock-

wise until it stops.

4. Connect the reactor fan power cable (13) to

the generator socket (6). The socket is fitted

with a positioning pin. Do not force the socket.

This should fit easily into its counterpart when

the pin is correctly aligned.

Step 2 - Preparation of the hydrogen reaction

1. Unscrew the reactor cap (12) by turning it

counterclockwise.

2. Fill the measuring cup (18) with water up to the

upper mark. Pour the water into the reactor (11)

Note: the recommended amount of wa-

ter is 7.77 oz. The measuring cup is cal-

ibrated for this exact volume. In all circum-

stances, the volume of water in the reactor

must be between the two lower and upper vis-

ible marks on the internal face of the reactor.

In no circumstances should the volume of wa-

ter exceed the upper mark, which would

cause water flowing into the fuel cell.

3. Open the vacuum foil packaging of the reactive

powder bag (17), without using any sharp object

(ie. scissors). The vacuum wrap is designed to be

hand torn at the side notch.

Note: In the event a reactive powder

bag is damaged or torn opened when

opening its vacuum-packed packaging, do

not use it. Set aside in a dry place, avoiding

contact with water. Using a damaged reactive

powder bag could cause an uncontrolled hy-

drogen production reaction with high heat

production.

4. Insert vertically the reactive powder bag into

the reactor (11). The reaction of hydrogen pro-

duction starts after about 10 seconds after the re-

active powder bag comes in contact with water.

5. Close the reactor cap (12) by screwing it clock-

wise until it stops (fingers tied).

Step 3 - Getting started

1. The red and green LED indicators light up sim-

ultaneously for 2 seconds to indicate proper oper-

ation.

2. The green LED indicator (9) flashes: the sys-

tem is starting up, the USB (2) and cigarette

lighter (3) electrical outlets are not yet active.

3. After a period of approximately 60 seconds,

the green LED indicator will remain continuously

on: the electric generator is operational, and the

USB and cigarette lighter sockets are active and

can be used.

Note: The electric generator starts automati-

cally the moment hydrogen begins to feed the

internal fuel cell.

Note: the duration of the start-up phase is ap-

proximately 60 seconds. This period may vary

depending on parameters such as the outside

temperature, the quality of the water, the

length of storage of the equipment. It is nor-

mal to observe a start-up phase that is

slightly less or greater than 60 seconds.

Step 4 - Operation

1. The electrical outlets (2) and (3) are located on

the front of the electric generator (1).

2. The USB sockets (2) are accessible by un-

screwing their plugs covers. They are USB-A

type and provide a maximum current of 2.4 amps

at an electrical voltage of 5 volts.

3. The cigarette lighter sockets (3) are accessible

by pulling on their plugs covers. They are

ISO4165 type and provide a maximum current of

2.5 amps at an electrical voltage of 12 volts.

Note: The product does not have an on / off

switch. Its operation is controlled by the pro-

duction of hydrogen in the reactor. Once the

hydrogen production reaction has started, it

cannot be stopped until all the reactive pow-

der bag is consumed.

4- In the event of electrical over-consumption

(electrical power demanded exceeding the pro-

duction of hydrogen in the reactor), the generator

cuts the USB or cigarette lighter electrical outputs

according to the power measured on the sockets

and the red LED indicator lights up continuously.

It is necessary to disconnect the equipment caus-

ing over-consumption in order for the generator

to continue to operate.

Note: Reactive powder bags are designed to produce consistence hydro-

gen for one hour. At the start of the chemical reaction, the production of

hydrogen is high enough to reach an electrical power of 45W for a few

minutes. The reaction then stabilizes, corresponding to an available elec-

tric power of 30 Watts for 60 minutes. From approximately 60 minutes af-

ter the start of the reaction, the hydrogen production will gradually de-

crease, and the available electric power will become less than 30W. The

Indice

Manuali Generatore portatile popolari di altre marche

Kohler

Kohler 20EORZ Manuale di istruzioni

Powerhorse

Powerhorse 83171 Manuale utente

HURST

HURST ML-630-SI Manuale utente

ETQ

ETQ TG4000 Manuale utente

Briggs & Stratton

Briggs & Stratton 40265 Guida all'installazione

ConMed

ConMed 7550 Manuale utente

Owon

Owon Waveform Generator Manuale utente

evertz

evertz 7700 Series Manuale utente

Power Stroke

Power Stroke PS906025 Manuale utente

Firefly

Firefly Cygnus CYG2400/460/24 Manuale utente

Draper

Draper PG950S Aggiornamento firmware

PowerBoss

PowerBoss PowerBoss Manuale utente

SDMO

SDMO SH 4000 Manuale utente

EINHELL

EINHELL STE 5500 Manuale utente

Wanco

Wanco WI3000P Manuale utente

Full Boar

Full Boar FBT-3300 Manuale utente

Dwyer Instruments

Dwyer Instruments ASG Manuale utente

Westinghouse

Westinghouse WH1000i Series Manuale utente