Pressure Seal PS 400 Manuale utente
This manual is protected under the Copyright Laws of the United Kingdom. All rights
reserved. Reproduction of this material without the express written consent of Pressure
Seal Systems Ltd is prohibited.
PRESSURE SEAL SYSTEMS MAY MAKE IMPROVEMENTS AND OR CHANGES IN THE
PRODUCT DESCRIBED IN THIS MANUAL AT ANY TIME AND WITHOUT NOTICE.
This publication could contain technical inaccuracies or typographical errors. Changes
are periodically made to the information contained in this manual; these changes will be
incorporated in new editions of this publication.
Correspondence regarding this publication should be addressed directly to:
InfoSealPS
PS 400
Page intentionally blank
PS 400
Contents
1. Introduction
General ........................................1
Which side is which? .................................2
How to use this manual ................................3
Safety precautions ...................................4
Operating environment .................................4
Power requirements ..................................5
If the machine is damaged ...............................6
2. Features
General ........................................7
Folder components...................................8
Form guides ...................................8
Feed roll .....................................8
In-feed tray ....................................8
Folding plates ..................................8
Folding rollers...................................8
Operator controls....................................9
LCD display....................................9
On/Start Button ..................................9
Off/Stop button .................................10
+ button () ...................................10
– button ()....................................10
Reset button...................................10
Select button ..................................10
Speed control slider ...............................10
Power and safety components ............................11
Mains lead ...................................11
Top cover ....................................11
PS 400
03-19-02 Iss. 1. Page v
Sealing and stacking components...........................11
Pressure bolts ..................................11
Sealing rollers ..................................11
Conveyor ....................................11
3. Set-up
Setting up the machine ................................13
Removing the top cover................................14
Removing the folding plates..............................15
Setting up the folder .................................16
V fold set-up...................................16
C fold set-up ..................................18
Z fold set-up...................................20
Adjusting the form guides ............................22
Setting up the form conveyor ..........................23
4. Operation
General ........................................25
Loading forms ....................................26
Starting up and testing the machine ..........................27
Verifying folder settings .............................28
Processing forms ...................................29
Interrupting operation ..............................29
5. Operation Errors
Error Conditions ...................................31
Clearing mishandled forms ..............................32
Jam in folder ..................................32
Jam after folder .................................33
Pressure sealer bolt release ...........................34
Troubleshooting ...................................36
PS 400
Page vi 03-19-02 Iss. 1.
6. Cleaning the machine
Cleaning procedure ..................................39
7. Specifications
Folder/Sealer Specifications..............................41
Construction...................................41
Sealer ......................................41
Size .......................................41
Weight .....................................41
Power ......................................41
Speed ......................................41
Environment ...................................41
Feeder Capacity .................................42
Noise ......................................42
Form Specification ..................................42
Sizes ......................................42
Fold Configuration ................................42
Appendix A - Form Loading Guide
Appendix B - Form Curl
Service Visit Log
PS 400
03-19-02 Iss. 1. Page vii
Page intentionally blank
PS 400
Page viii 03-19-02 Iss. 1.
1. Introduction
General
This folder/sealer produces finished mailable documents or "self-mailers" from cut-sheet
Pressure Seal forms. In one smooth operation it folds and seals single sheets into
self-mailers quickly and economically. Pressure activated cohesives provide an instantly
secure seal on all sides of the form, whether you use a “C”, “V” or “Z” fold.
Features include:
•Simple to load and operate
•Easy to change the fold styles
•C, V, offset V and Z fold styles
•No adjustment required when changing the weight of forms used
•Automatic stop when the in-feed tray is empty
•If empty at power-up, the in-feed tray lowers for form loading
•In-feed forms electronic counter with reset
•Form flow error detection
This operator manual describes the set-up and operation of the machine and is written as
a reference for an operator who is familiar with mailing operations and has received some
basic training in operating this model.
03-19-02 Iss. 1. Page 1
Figure 1: Types of fold produced
Which side is which?
The terms "in-feed", "out-feed", "operator side" and “non-operator side” are used
throughout this manual to identify the sides of the machine.
•The in-feed is the side into which the forms are loaded.
•The out-feed is the side out of which the finished mailers exit.
•The operator side of the machine contains the control panel and is the side facing you
when the in-feed of the machine is on your left.
•The non-operator side contains the mains connection and on/off switch and is at the
back of the machine as you stand facing the operator side.
1. Introduction PS 400
Page 203-19-02 Iss. 1.
Non-operator side
Operator side
Out-fee
d
In-feed
Figure 2: The sides of the machine
Indice
Altri manuali Pressure Seal Macchina piegatrice
