Prime Design DEPLOYPRO LOCK N GO Manuale utente

DEPLOYPRO LOCK N GO

PRIME DESIGN, A SAFE FLEET BRAND ▪ Address: 1689 Oakdale Avenue #102, West St Paul, Minnesota 55118

Toll Free: 1.8.PRIME.RACK ▪ Fax: 651-552-1799 ▪ Email: [email protected] ▪ Website: www.primedesign.net

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

2

1

Z-Post Pair w/ Clamps (1X) Slide Assembly (1X)

M8 x 40MM (2X)

PLR-8229 ASSEMBLY INSTRUCTIONS–PACKAGING CONTENTS

CONTENTS OVERVIEW

1—PLR-8229.......................................................... (Qty 1)

DeployPro Lock N Go Ladder Clamp Assembly

2—DPS 8000/8001 (shown for illustrative purposes only)

Ordered separately

* Pre-assembly required. See your DeplyPro

Assembly Instructions for proper setup before

installing the PLR-8229.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

3

PLR-8229 ASSEMBLY INSTRUCTIONS

2

DEPLOYPRO LOCK N GO LADDER CLAMP

ASSEMBLY SEQUENCE

Slide the Clamp base into the open

position as shown.

1Where applicable, remove your ladder and

straps before installing the Clamp base.

NOTE: Your ladder will be needed in

Steps 4–6 for nal adjustments.

Pull release levers on

both sides to open

NOTE: Ladder, Base/Rotation rack and mounted DPS are shown for

illustrative purposes only. Customer-specic models and setup will vary.

Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability

(the “Prime Design Limited Warranty”).

▪

TM & © 2020 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608 AND OTHER PATENTS PENDING

4

PLR-8229 ASSEMBLY INSTRUCTIONS

USAM-PLR8229-US01 Rev-B 0619

3

Install Clamp base with the included M8 Hardware

into the DeployPro’s pre-installed Strip Nuts as shown.

Determine desired positioning on the DeployPro,

and torque to 90 in-lbs.

4Position your ladder

back onto the Deploy Pro.

Install the Z-Posts onto the

ends of the Clamp base

as shown below.

6

Using the release levers,

slide the Clamp base

together into the closed

position on the ladder.

6.1

Slide Z-Posts in until they are approximately ¼” from

the sides of the ladder, and torque the Z-Post Clamp

Nuts to 90 in-lbs.

¼” from ladder sides

NOTE: Ladder Straps will no longer be necessary,

and may be discarded.

5Finger-tighten Clamp Nuts only.

Do not trorque until Step 6.1

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Prime Design Accessori per automobili

Prime Design

Prime Design AXC Manuale utente

Prime Design

Prime Design ACC-8000 Manuale utente

Prime Design

Prime Design FBM-1009 Manuale utente

Prime Design

Prime Design FEA-0022 Manuale utente

Prime Design

Prime Design FEA-0004 Manuale utente

Prime Design

Prime Design FEA-0015 Manuale utente

Prime Design

Prime Design CBR-0010 Manuale utente

Prime Design

Prime Design WORKPRO ASH-8034 Manuale utente

Prime Design

Prime Design AR1221 Manuale utente

Prime Design

Prime Design Safe Fleet FBM-1028-BLK Manuale utente

Prime Design

Prime Design AR1901 Manuale utente

Prime Design

Prime Design VBB-FT31B Manuale utente

Prime Design

Prime Design UXR-001-E Manuale utente

Prime Design

Prime Design AR1937 Manuale utente

Prime Design

Prime Design FBM-1061 Manuale utente

Prime Design

Prime Design ErgoRack VRR-FT31B Manuale utente

Prime Design

Prime Design AAL-8003 Manuale utente

Prime Design

Prime Design FEA-0019 Manuale utente

Prime Design

Prime Design AR1930 Manuale utente

Prime Design

Prime Design FEA-0001 Manuale utente

Prime Design

Prime Design FBM-1024 Manuale utente

Prime Design

Prime Design VRI3-FT31B Manuale utente

Prime Design

Prime Design URX-001-E Manuale utente

Prime Design

Prime Design AluRack AR-2000 Manuale utente

Manuali Accessori per automobili popolari di altre marche

James Baroud

James Baroud Odyssey Manuale utente

Motorola

Motorola i50sx Manuale utente

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manuale utente

Feniex

Feniex T3 Manuale utente

Renault

Renault 77 11 423 180 Manuale utente

Kia

Kia E8300-4D000 Manuale utente

Brink

Brink 756843 Manuale utente

Whispbar

Whispbar K085W Manuale utente

v.link

v.link CI-VL2-PC-HSD Manuale utente

Viking

Viking Stack-Rack Guida rapida alla configurazione

Aries

Aries 203015 Manuale utente

Choetech

Choetech AT0005 Manuale utente

ZZ2

ZZ2 ZZAIR-PRO Manuale utente

Holman

Holman 4A80L Manuale utente

Thule

Thule 2075 Manuale utente

Motorola

Motorola T325 Manuale utente

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guida all'installazione

DV8

DV8 FBJL-02 Manuale utente