Primera Bravo II Manuale utente

SECTION I: SETUP

1. Check to make sure the following items are enclosed:

•Output Bin Holder

•Output Bin

•Teflon Tape Strips

•Operators Manual and

other information

2. Attaching the Output Bin

•After the software has

been updated, you will

need to attach the

Output Bin Holder

and Output Bin to the

Bravo to collect the

finished discs. Attach

the Output Bin Holder

as shown, aligning the

Locating Tabs on the

Output Bin Holder with

the Slots located on the

underside of the Bravo

allowing the holder to

hang off the edge of the

table. Notice the slots

do allow for adjusting

the position of the out-

put bin. If your discs

are not falling into the

bin, you will be able to

move the bin slightly to

align it.

•Place the Output Bin on

the Output Bin Holder

as shown.

•Your kit comes with

Teflon coated tape strips.

These may be necessary

if the discs you use do

not slide freely down

the Output Chute into

the Output Bin. Apply

the strips to the ribs of

the Chute as shown,

starting at the top of the

chute, and continuing

on down to the lower lip of the Chute to reduce friction and

cause the discs to eject properly.

SECTION II: ENABLING KIOSK MODE

Kiosk mode is available both in PrimoDVD and in the driver as a

printing option. This allows you to use the Kiosk Mode for full CD

production as well as print-only jobs.

Using Kiosk Mode in PrimoDVD

In PrimoDVD, click Robotics then Options. You will see the

following window:

Using Kiosk Mode in the Print Driver

If you are using the Bravo AutoPrinter,

or just want to print discs and have

them eject out the front of the unit, you

can enable Kiosk Mode in the driver as

well. In the Driver Settings you will see

a new option, Disc Output Location.

Simply set this to Kiosk Mode. If you

Thank you for purchasing the Kiosk Kit for the Bravo™ Disc

Publisher. This will enable your Bravo to use both the right and left

bins as input, doubling the capacity of your Bravo. This sheet

describes the installation and use of the Kiosk Kit.

Output Bin

Holder

Output Chute

Output Bin

Slots

Locating Tabs

Lower Lip of Chute

Output Chute

Ribs

Start Tape Here

Output Holder

Output Bin

Click the Enable Kiosk

Mode Check Box to use

this feature.

are creating jobs in PrimoDVD, it is not necessary to change this

driver setting if you already have set Kiosk Mode active under

Robotic Options. The PrimoDVD Kiosk Mode option overrides any

driver setting.

NOTE: In print-only jobs, you may see a Windows "Time Out" error

when the Bravo is out of discs in one bin and switches over to the other.

This is normal, and will not affect the completion of the print job. The

Bravo will retry automatically requiring no operator intervention.

Using Kiosk Mode in Discribe

Set up your job as described in

your Bravo Disc Publisher

Macintosh User's Manual. In

the Robot Write pane you will

see a check box option that will

enable Kiosk Mode.

Using Kiosk Mode in the Mac

Print Driver

If you are using the Mac Bravo

AutoPrinter, or just want to print

discs and have them eject out

the front of the unit, you can

enable Kiosk Mode in the driver

as well.

Click Print Setup to

see the driver pane

and all of its

settings. You will

want to click the

Copies and Pages

button and select

Publisher Settings

option in the drop-

down menu to

see the full pane

and access all the

printer driver settings. At the bottom of the Settings pane you

will see a check box that will enable Kiosk Mode.

Congratulations! You are now ready to use Kiosk Mode, doubling

the capacity of your Bravo Disc Publisher or Bravo AutoPrinter!

Kiosk Kit

For use with Bravo™ Disc Publisher

Operator's Instructions

012204-510710

Altri manuali per Bravo II

Questo manuale è adatto per i seguenti modelli

Altri manuali Primera Accessori per stampanti

Primera

Primera LX-REWINDER Manuale utente

Primera

Primera LX400 Manuale utente

Primera

Primera OptiVault Manuale utente

Primera

Primera RW-12 Manuale utente

Primera

Primera Conductor Conductor Printer Manuale utente

Primera

Primera OptiVault Manuale utente

Primera

Primera Impressa 3 Manuale utente

Primera

Primera PN 510725-121304 Specifiche

Primera

Primera Ink Jet Printers Manuale utente

Primera

Primera Signature II Specifiche

Primera

Primera AP-CODE Manuale utente

Primera

Primera Bravo Pro Manuale utente

Primera

Primera Bravo II Manuale di istruzioni

Primera

Primera Label Stock Manuale utente

Primera

Primera Bravo Pro Manuale utente

Primera

Primera OptiVault Manuale utente

Primera

Primera ADL-MAX Manuale utente

Primera

Primera Disc Autoloader ADL-MAX Manuale utente

Manuali Accessori per stampanti popolari di altre marche

Star Micronics

Star Micronics TSP800 Series Manuale utente

REA

REA JET HR pro 2K Manuale utente

HP Laserjet,Color Laserjet 4si Manuale utente

oliser

oliser MS 45 Manuale utente

Roland

Roland DU2-64 Istruzioni e ricette

Xerox

Xerox EFI EXP6000 Manuale utente

Canon

Canon Finisher-T1 Manuale utente

Sharp

Sharp FO-1MK Manuale utente

Labelmate

Labelmate PM-300 Manuale utente

Epson

Epson T6248 Manuale operativo

Epson

Epson OT-BZ20 Manuale utente

Canon

Canon TonerRobot EP-27 Manuale utente

Ricoh

Ricoh LCIT RT5100 Guida rapida

GBC

GBC 16 Series Manuale utente

Canon

Canon INNER 2-WAY TRAY-E1 Manuale operativo e di manutenzione

Develop

Develop SD-509 Manuale utente

Kyocera

Kyocera KM-6230 Manuale

Triumph Adler

Triumph Adler DF-710 Manuale